Panasonic DMC-F1PP manual Insert the Memory Card, If the image is not based on the DCF

KC42-PP.book 88 ページ ２００２年１２月１９日 木曜日 午後４時３６分

Others
Warning Indications
[NO MEMORY CARD]	[THIS PICTURE CAN’T BE
Insert the Memory Card.	DELETED] / [SOME PICTURES
[THIS MEMORY CARD IS	CAN’T BE DELETED]
	If the image is not based on the DCF
PROTECTED]	standard, it is not possible to delete
Cancel the Memory Card lock.	selected pictures.
[NO VALID IMAGE TO PLAY]	[NUMBER OF PRINT IS OVER]
Carry out playback after recording or	You have exceeded the number of
after inserting the Memory Card with a	images that can be set at once with
recorded image.	multi-deleting setting.

[MEMORY CARD FULL] / [NO

ENOUGH MEMORY IN THE CARD]

Insert a new Memory Card or delete unnecessary data.

[MEMORY CARD ERROR]

Failed access to Memory Card. Insert the card again.

[READ ERROR]

Data reading error.

Play it back again.

[CAN’T BE SET ON THIS PICTURE]

/[CAN’T BE SET ON SOME PICTURES]

If the image is not based on the DCF standard, it is not possible to set the DPOF.

[MEMORY CARD ERROR FORMAT THIS CARD?]

The format of this card cannot be recognized by the camera. Format the card again with the camera.

[WRITE ERROR]

Data writing error.

Turn the camera [OFF] and remove the card. Then insert the card and turn the camera back [ON]. Be sure camera is [OFF] before removing or inserting the card to avoid damaging the card.

[PLEASE SET THE CLOCK]

This message is displayed when you use the camera for the first time or you do not use the camera for a long time. Set the clock again.

[THIS PICTURE IS PROTECTED]

After cancelling the protect setting, you can delete or overwrite the image.

[REC MODE DIAL IS NOT IN THE PROPER POSITION]

This message is displayed when you turn on the camera with the mode dial in the wrong position.

Rotate the mode dial to the proper position.

88