Panasonic DMC-F1PP manual Troubleshooting

KC42-PP.book 89 ページ ２００２年１２月１９日 木曜日 午後４時３６分

Others

Troubleshooting

1:The power does not turn on.

1-1: Are the battery and the AC adaptor correctly connected? Check the connection.

1-2: Is the battery sufficiently charged? Use a battery that has been sufficiently charged.

2:As the power is turned on, it turns

off immediately.

2-1: Is the battery charge insufficient to operate the camera? Charge the battery or replace it with charged one.

2-2: Has condensation occurred? Carrying the digital camera from a cold place to a warm place could cause condensation to form inside the camera. Wait until condensation disappears.

3:The image cannot be recorded. 3-1: Is the Memory Card inside?

3-2: Is the mode dial correctly set ? Check it.

3-3: There is no memory capacity left on the card. Before recording, delete some images.

4:The image is not displayed on the

LCD monitor.

4:Is the LCD monitor set to OFF?

5:The LCD monitor is too bright or dark.

5:Adjust the brightness of the LCD monitor.

8:The image will not play back. 8-1: Is the Memory Card inside?

8-2: There is no image in the Memory Card.

8-3: The mode dial is not set to playback

[ ].

9:The image is not displayed on the television.

9-1: Is the camera correctly connected with the TV? Check it.

9-2: Set the TV to video input mode.

10: When connecting to a PC, images cannot be transferred.

10-1:Check that the camera is correctly connected to the PC.

10-2:Is the camera correctly recognized by the PC?

11: The clock setting is reset.

11-1:If you do not use the camera for a long time, the clock setting may be reset. When the message [PLEASE SET THE CLOCK] appears, set the clock again.

11-2:When you take a picture before setting the clock, [0:00 0. 0. 0] is recorded.

6:Flash does not light.

6:The flash mode is set to forced OFF. Change the flash mode.

7:The display or images on the LCD

monitor are not focused.

7:Set the mode dial to the mode corresponding to the distance to the subject.

89