Panasonic DMC-F1PP manual 2,3,4, Only when setting the white balance again, White balance is set

KC42-PP.book 50 ページ ２００２年１２月１９日 木曜日 午後４時３６分

Recording images (advanced)

Here the white set mode of white balance is explained.

[Preparation]

• Set the mode dial except for [ ]/[ ]/[ ]. (P22)

1

52 3

Press the [MENU] button.

Press 3/4 to select [W.BALANCE].

Press 2/1 to set to white set [ ].

Only when setting the white balance again

4Press 1.

•The message “FRAME THE CAMERA AT THE WHITE SURFACE AND PRESS SHUTTER” is displayed.

1,6 2,3,4

2,3

REC1/3 SETUP

W.BALANCE

	PICT.SIZE		1600
	QUALITY
	SPOT MODE
SELECT SET		EXIT MENU

4

WHITE SET

FRAME THE CAMERA

AT THE WHITE SURFACE

AND PRESS SHUTTER

5Aim the camera at a sheet of white paper 1 or similar object so that it completely fills the frame to white on the screen and press the shutter button all the way.

•White balance is set.

6Press the [MENU] button.

•The menu will disappear.

•When taking a picture with the flash after setting the white balance manually, the white balance may not be properly adjusted. We recommend setting the white balance to [AUTO] when using the flash.

CANCEL MENU

50