Alt Enter | Panasonic CF-19 series specification

Image colors are not repro-	Remove the check mark of [Intel(R) Display Power Saving Technology].
duced as expected when	A Click [start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) GMA Driver
displaying photographs or	for Mobile].
other images.	B Click [Display Settings] - [Power Settings].
The screen is disordered.	Changing the number of display colors and resolution may affect the screen. Restart the
	computer.
	Connecting/disconnecting an external display may affect the screen. Restart the com-
	puter.
During Simultaneous display,	When using the Extended Desktop, use the same display colors for the external display
one of the screens becomes	as those used by the LCD.
disordered.	If you continue to experience problems, try changing the display by clicking [start] -
	[Control Panel] - [Other Control Panel Options] - [Intel(R) GMA Driver for Mobile] - [Dis-
	play Devices].
	When the [Command Prompt] is set to “Full Screen” by pressing	Alt	+	Enter	, the
	picture is displayed on one of the screens only. When the window display is restored by
	pressing Alt + Enter, the picture is displayed on both screens.
	Simultaneous display cannot be used until Windows startup is complete (during Setup
	Utility, etc.).
The external display does	If the external display does not support the power saving function, it may not work nor-
not work normally.	mally when the computer enters the power saving mode. Turn off the external display.

Touch Pad / Touchscreen (only for model with touchscreen)/Digitizer (only for model with digitizer)

The cursor does not work.	When using the external mouse, connect it correctly.
	Restart the computer using the keyboard.
	(Press		, U, and R to select [Restart].)
	If the
		computer does not respond to keyboard commands, read “No response” ( page
	28).
Cannot input using the touch	Set [Touch Pad] to [Enable] in the [Main] menu of the Setup Utility.
pad.	The drivers for some mice may disable the touch pad. Check your mouse’s operating
	instructions.
Cannot point the correct	<Only for model with touchscreen>
position using the included	Perform the touchscreen calibration ( page 15).
stylus/pen.	<Only for model with digitizer>
	Perform the digitizer calibration.
	Use the included pen.
	On the Windows logon screen or the Welcome screen, you may not be able to point the
	correct position using the included pen. Use the keyboard or the touch pad to log on.

Troubleshooting

The Reference Manual is not displayed.

Install Adobe Reader.

ALog on to Windows as an administrator.

BClick [start] - [Run], input [c:\util\reader\AdbeRdr70_enu_full.exe], then click [OK]. Follow the on-screen instructions.

CUpdate Adobe Reader to its latest version.

If your computer is connected to the internet, start up Adobe Reader and click [Help] - [Check for updates now].