Useful Information
Hard Disk Backup Function (Recover Pro\
CAUTION
zDuring the installation, the screen may become black (no display) momentarily. This is not a malfunction.
zIf you select [Typical] in installation, approximately 40% (max.) of the hard disk drive space is allocated as the back- up area.
zYou cannot change the size of backup area after creation.
Complete Backup
Backs up all data on the hard disk.
Preparation
zConnect the AC adaptor.
1Log on to Windows as an administrator.
2Close all programs.
3Click [start] - [All Programs] - [Phoenix Applications] - [Phoenix Recover Pro 6].
“Recover Pro 6” screen appears.
4 Click [Complete Backup], and click [Yes].
The computer restarts, and “Recover Pro 6” screen appears.
Follow the
NOTE
You can completely backup only one hard disk’s worth of data to the backup area.
Do not touch the power switch while using the Recover Pro.
Complete Restore
This function uses the data created during complete backup. It restores the hard disk data to the condition when you performed the complete backup. Files created and changes made to settings after the latest complete backup is made will be deleted.
Preparation
zConnect the AC adaptor.
1Click [start] - [All Programs] - [Phoenix Applications] - [Phoenix Always Launcher], and click [Run].
zThe computer restarts, and “Phoenix Always” screen appears.
Alternatively turn on or restart the computer, and hold down F4 while [Panasonic] boot screen is displayed until “Phoenix Always” screen appears.
2 Click [Protect / Recover], and click [Phoenix Recover Pro 6].
z“Recover Pro 6” screen appears.
3 Click [Complete Restore].
Follow the
NOTE
Do not touch the power switch while using the Recover Pro.
To access the online manual
AClick [start] - [All Programs] - [Phoenix Applications] - [Docs], and
B
20