Panasonic FP-X Series manual  Control specifications, Specifications

FP-X series

Specifications

Control specifications

Item		Specifications
Program method		Relay symbol method
Control method		Cyclic operation method
Program memory		Flash ROM built-in (no battery backup required)
Program capacity		16k steps (C14), 32k steps (C30, C60)
Operation processing speed		Basic instruction 0.32Μs/step
Basic instructions		111
Applied instructions		216
External inputs (X)		1760 points *1
External outputs (Y)		1760 points *1
Internal relay (R)		4096 points
Special internal relay (R)		192 points
Link relay (L)		2048 points
Timer/counter (T/C)		Total 1024 points: timer capable of counting
		(1ms, 10ms, 100ms, 1s) x 32767
		Counter capable of counting 1 to 32767
Data register (DT)		12285 words (C14), 32765 words (C30, C60)
Link data register (LD)		256 words
Special data register (DT)		374 words
Index register (I0 to ID)		14 words
Master control relay (MCR)		256 points
Number of labels (LOOP)		256 labels
Number of differentiations		Up to program capacity
Number of stepladders		1000 stages
Number of subroutines		500 subroutines
Number of interruption programs		Relay output type: 15 programs (14 external, 1 constant)
		Transistor output type: 9 programs (8 external, 1 constant)
		Built-in (Transistor output): single-phase 8ch (50kHz x 4ch + 10kHz x 4ch)
High-speed counter *2		Built-in (Relay output): single-phase 8ch (10kHz x 8ch)
		Pulse I/O cassette: single-phase 2ch (80kHz x 2ch)
Pulse output *3		Built-in (Transistor output): 100kHz x 2ch + 20kHz x 2ch
		Pulse I/O cassette: One unit (one axis) 100kHz, or two units (two axes) 80kHz
Pulse catch input / interrupt input		Relay output type: Total 14 points (including the high-speed counter)
		Transistor output type: Total 8 points (including the high-speed counter)
Periodical interrupt		0.5ms to 30s
Potentiometer		2 points (0 to 1000) (C14, C30) 4 points (0 to 1000) (C60)
Constant scan		Possible
Real-time clock		Equipped (usable only when AFPX-MRTC is installed) *4
Flash ROM	Backup by F12,	Data register (32,765 words)
	P13 commands
backup *6
	Auto-backup	Counter 16 points (1008 to 1023), Internal relay 128 points
	at power failure	(R2470 to R255F), Data register 55 words
Battery backup		The memory allocated in the storage area by the
		system register (only when a battery is installed) *5
	Before installing	C14: 1230 days (actual operation 10 years at 25°C)
	AFPX-MRTC	C30, C60: 990 days (actual operation 10 years at 25°C)
Battery life	After installing	C14: 780 days (actual operation 10 years at 25°C)
(when no power	AFPX-MRTC	C30, C60: 680 days (actual operation 10 years at 25°C)
is supplied)		(More than two batteries can be installed in C30 and C60.
		In this case, the battery life is extended several times)
Password		Capable (4 or 8 characters selectable)
Self-diagnosis function		Watch dog timer, program syntaxcheck
Comment storage		Capable (328KB) (backup battery not required)
PLC link function		Max. 16 units, link relay 1024 points, link register 128 words
		(No data transfer or remote programming)
Rewriting in RUN mode		Capable

Notes:

*1 The actual usable number of points is restricted by the hardware.

*2 Specification at the rated input voltage of 24V DC, 25°C. Frequency may be lower due to the voltage and temperature.

*3 Max frequency may vary by the method of operation. Please refer to the manual for details.

*4 Calendar accuracy at 0°C: 119sec/month or less, 25°C: 51 sec/month or less, 55°C: 148 sec/month or less (Real-time clock requires a battery.)

*5 When data is stored in the storage area while the battery is not installed, the data is not cleared and the data value may be indefinite. The same condition occurs when the battery is exhausted. *6 The number of possible rewrites is 10,000 or less.

01/2008

21