FP-X series
Reassuring data security
Protects your important programs by preventing illegal copies.
Program upload is easily prohibited by tool software FPWIN.
Reading a program from the PLC main unit is virtually impossible.
In the
Release of an
Program updates are easily carried out by transferring the program in the master memory to
Protected | Protected | |
| Master memory | |
Items possible during an | Items impossible during an upload- prohibited condition | |
Program download from a PC | Forced input/output (original program is required) | |
Data transfer from the master memory | Ladder monitor (original program is required) | |
Change of data monitor/resistor value | Rewrite during RUN mode (original program is required) | |
Contact monitor |
| |
Time chart monitor |
| |
Program upload to a PC | Password protection | |
Data transfer to the master memory | ||
|
More secure
The combination of upper and lower case alphanumeric characters produces 218 trillion combinations. In addition, after 3 con- secutive entry failures, a power reset is required for password release.
Using a standard USB port makes it unnecessary to use an an expensive USB conversion adapter/ cable for connecting a PC to the PLC.*
Before
PC | RS232C/422 | Previous Model |
| conversion |
|
| adapter |
|
USB
conversion cable
* USB port is equipped with C30 and C60.
With FP-X
PCAFPX-C30/C60
USB cable direct connection
The conventional
RS232C port can also be used.
C30 and C60 control units have a USB port as standard equipment. They can be easi ly connected to a PC with a commercially available USB cable (AB type), making pro- gram editing/monitoring available. It is no longer nec- essary to bring a dedicated cable to remote locations.
01/2008
12