Panasonic FW100NTU manual About Your Projector, Remote control

Page 11

About Your Projector

Remote control

POWER button

While the MAIN POWER is on, switch between stand-by mode and projection mode.

(page 20)

Project a laser pointer. (page 24)

Display the MAIN MENU. (page 27)

Navigate through the menus with FGIH, and activate the menu item with ENTER. (page 27)

Capture the projected image as a frozen picture. (page 25)

Reset some of the settings to the factory default settings. (page 25)

See CD-ROM contents.

Control to change the scale by means of digital zoom. (page 26)

See CD-ROMcontents.

Automatically adjust the setting of DOT CLOCK,

CLOCK PHASE and SIGNAL

SEARCH for the projected

image of COMPUTER signal. (page 23)

INPUT SELECT buttons

Switch the required input signal button to select.

See CD-ROMcontents.

See CD-ROMcontents.

Return to the previous menu. (page 27)

Turn off the projection temporarily. (page 25)

Display the frozen image

while the display of subsequent images

continues. (page 25)

Display 2 different source images at a time. (page 25)

Control to adjust the volume of the speakers. (page 26)

Preparation

Battery compartment

1.Press the tab and lift up the cover.

2.Insert the batteries according to the polarity diagram indicated inside.

Top view

Remote control signal and Laser pointer beam emitters. (page 23)

Attaching a hand strap

You can attach a favorite strap on to the Remote control.

Remote control indicator

If you press any button except the LASER button, the Remote control indicator will flash. If you press the LASER button, it will lit.

Remote control indicator

NOTE:

•Do not drop the Remote control.

•Avoid contact with liquids or moisture.

•Use manganese batteries or alkaline batteries with the Remote control.

•Do not attempt to modify or disassemble the Remote control. Contact an Authorized Service Center for repairs.

•Do not keep pressing the Remote control buttons as this may shorten battery life.

•Do not point the laser in other people’s eyes or stare into beam.

•See “Remote control operation” on page 23.

ENGLISH - 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Model No. PT-FW100NTU PT-FW100NTU Important Safety NoticeImportant Information Panasonic Important Safety NoticeDeclaration of Conformity Trade NameContents Appendix SettingsMaintenance ContentsPrecautions with regard to safety Use only the specified batteries Precautions with regard to safetyDo not set up the projector outdoors Do not look into the lens while the projector is being usedElectric shocks can result if this is not done Remove the used batteries from the remote control promptlyDo not put your weight on this projector Do not mix old and new batteriesAccessories Preparation Minimum required setting screenRead this first About Your Projector Remote controlControl panel Projector bodyAbout Your Projector Top and front viewOutput by menu operation About Your Projector Back and bottom viewComputer. Selectable for input Getting Started Setting upCalculation methods for screen dimensions Screen size and throw distanceMounting in the ceiling and projecting from front Front leg adjusters and throwing angleSetting up Projection methodVertical shift Adjusting the Lens shift leverLens shift and positioning Horizontal shiftWhen the projector position is fixed Setting up Projector location rangeWhen the screen position is fixed LAN terminal Connecting with computersConnections Before connection to the projectorConnections Connecting with AV equipmentConnecting with Video IN/S-VIDEO Connecting with ComponentPower indicator Switching the projector on/offPower cord Switch the Main Power on Press the Power button Switching on the projectorSwitching off the projector Switching the projector on/offFocus lever Zoom lever Selecting the input signalProjecting an image Positioning the imageOperation Remote control operationSetting up the image position automatically Operating rangeUsing the laser pointer Switching the input signalStopping the projection temporary Resetting to the factory default settingsProjecting an image in INDEX-WINDOW mode Capturing an imageEnlarging the centred area Controlling the volume of the speakerProjecting 2 images at a time Displaying the Main menu Adjusting with the bar scale itemsMenu Navigation Navigating through the MenuMenu Navigation Main menu and Sub-menu169 1610 Password Change Network StandbyContents WEB Control Live Mode CUT Status InitializePicture menu For RGB signals Detailed SetupFor S-VIDEO/VIDEO signals Position menu Option Aspect ratio depend on signalsFrame Lock Screen Format menuOption menu Direct Power on Power OFF TimerAuto Setup Signal SearchTest Pattern HighlandClosed Caption Text Display Input PasswordPassword Change Security menuNetwork menu, the following items are available Network menuItems in Network menu Temp indicator TEMP, Lamp and Filter IndicatorsManaging the indicated problems Lamp indicatorReplacing the ARF Auto Rolling Filter Care and ReplacementCleaning the projector Before replacing the Lamp unit Care and Replacement Resetting the FilterWhen to replace the Lamp unit Replacing the Lamp unitRemoving and replacing the lamp unit Ceiling mount bracket safeguardsCare and Replacement Replacement procedure Installing the safety cableTroubleshooting Dots *1 KHz MHz List of compatible signalsTechnical Information Quality *2Serial terminal Projector Technical Information Cable specificationsControl commands Computer connection guidanceRemote terminal Lamp switchingSwitching input Signals Input signalSpecifications Computer Audio COMPONENT1OUT AudioScreen size and throw distance for 43 aspect ratio Screen size and throw distance for 169 aspect ratioThese Operating Instructions are printed on recycled paper DimensionsTrademark acknowledgements Unit mmLever IndexALS Ambient Luminance Sensor ARF Auto Rolling Filter Calculation methodsScreen size IndexMains lead Navigation buttonsNuméro de série Avis important concernant la sécuritéImformation Importante Advertencia Avis important concernant la sécuritéInformation Importante AvertissementAvertissement Précautions de sécuritéPrécautions de sécurité Mises EN GardeSinon cela peut causer des chocs électriques Utiliser uniquement les piles spécifiéesNe pas mélanger des piles usées et des piles neuves Précautions lors de lutilisation Précautions lors de linstallationPrécautions lors du transport Avant de remplacer le lUnité de la lampe Remplacement de lunité de la lampeDélai de remplacement de lUnité de la lampe De lUnité de Installation du câble de sécuritéProtections du support de montage au plafond Retirer et remplacer la lampeTechnical Support Panasonic Projector Systems Company

FW100NTU specifications

The Panasonic FW100NTU is a sophisticated air conditioning unit designed for modern indoor spaces, featuring cutting-edge technology and energy-efficient operation. This model stands out due to its blend of comfort, efficiency, and functionality, making it an excellent choice for homes and small offices alike.

One of the main features of the FW100NTU is its Inverter technology, which allows for precise temperature control. This technology adjusts the compressor speed according to the cooling or heating demand, resulting in improved energy efficiency and reduced electricity bills. The inverter system not only maintains a stable temperature but also significantly reduces noise, creating a quieter environment.

Another notable characteristic of the FW100NTU is its powerful cooling and heating capabilities. With a cooling capacity of up to 10,000 BTU, this air conditioner can effectively cool medium-sized rooms. In heating mode, it offers reliable performance even in colder months, ensuring year-round comfort. The unit is equipped with advanced heat exchange technology that enhances heating efficiency, providing warmth rapidly when needed.

Air quality is a key consideration in any climate control system, and the FW100NTU excels in this area as well. The unit features a multi-stage filtration system that removes dust, allergens, and other particulates from the air, promoting a healthier living environment. Additionally, the Panasonic nanoe-G technology works to purify the air by eliminating bacteria and viruses, ensuring that occupants can breathe easy.

The FW100NTU is designed with user convenience in mind. It comes with a remote control for easy operation from anywhere in the room. Additionally, the unit is equipped with programmable timers and multiple fan speeds, allowing users to customize their comfort levels to fit their schedules. An easy-to-read LED display provides real-time information on settings and modes.

For those concerned about aesthetics, the FW100NTU boasts a sleek and modern design that can seamlessly blend into any interior decor. Its compact size allows for flexible installation options, whether wall-mounted or as a portable unit.

Overall, the Panasonic FW100NTU is a versatile air conditioning solution that combines performance, efficiency, and comfort, making it a top choice for consumers looking to enhance their indoor climate control systems. With its advanced features and reliable operation, this model represents Panasonic's commitment to providing innovative and sustainable air conditioning solutions.
Top Page Image Contents