Panasonic FW100NTU About Your Projector Back and bottom view, Computer. Selectable for input

Page 13

About Your Projector

Back and bottom view

Security lock

 

 

Attach the commercial shackle lock,

 

 

manufactured by Kensington, to

 

 

protect your projector. Compatible

 

Lamp unit compartment

with the Kensington MicroSaver

 

Security System.

 

(page 41)

 

 

Air exhaust port

 

 

Heated air comes out of this

 

 

opening.

 

 

MAIN POWER

 

 

Switch the projector on/off.

 

 

(page 21)

 

 

Burglar hook port

 

 

Attach a commercial burglar

 

 

prevention cable.

 

 

AC IN

 

 

Connect the Power cord to supply

 

 

electronic power to the projector.

ARF (Auto Rolling Filter)

Font leg adjusters

(page 20)

compartment

Screw up/down to adjust the

 

(page 40)

projection angle. (page 15)

 

 

COMPUTER1 IN

 

 

Connect an RGB signal cable from

S-VIDEO IN

 

a computer.

LAN

COMPUTER2 IN/1 OUT

Connect a S-VIDEO signal cable.

Connect a LAN cable for network

Connect an RGB signal cable from

VIDEO IN

connection.

a computer. Selectable for input

Connect an RCA composite video

 

and output by menu operation.

cable.

 

 

AUDIO IN

 

 

Connect audio cables for inputting

 

 

audio signal corresponding to

 

 

VIDEO IN, S-VIDEO IN and

 

 

COMPONENT IN.

 

 

COMPONENT IN

 

 

Connect a YPBPR signal cable.

Preparation

SERIAL

See “Serial terminal” on page 45.

REMOTE

See “REMOTE terminal” on page 47.

COMPUTER AUDIO IN

Connect audio cables for inputting audio signals corresponding to COMPUTER1 IN and/or COMPUTER2 IN/1 OUT.

VARIABLE AUDIO OUT Connect an audio cables for outputting audio signals to the connected equipment.

NOTE:

Do not cover the ventilation openings or place anything within 50 cm (20") of them as this may cause damage or injury.

When a cable is connected to the VARIABLE AUDIO OUT, the built-in speaker will be disabled.

ENGLISH - 13

Image 13
Contents Model No. PT-FW100NTU Important Information Important Safety NoticePT-FW100NTU Declaration of Conformity Important Safety NoticeTrade Name PanasonicContents Maintenance SettingsContents AppendixPrecautions with regard to safety Do not set up the projector outdoors Precautions with regard to safetyDo not look into the lens while the projector is being used Use only the specified batteriesDo not put your weight on this projector Remove the used batteries from the remote control promptlyDo not mix old and new batteries Electric shocks can result if this is not doneAccessories Read this first Minimum required setting screenPreparation About Your Projector Remote controlAbout Your Projector Projector bodyTop and front view Control panelComputer. Selectable for input About Your Projector Back and bottom viewOutput by menu operation Calculation methods for screen dimensions Setting upScreen size and throw distance Getting StartedSetting up Front leg adjusters and throwing angleProjection method Mounting in the ceiling and projecting from frontLens shift and positioning Adjusting the Lens shift leverHorizontal shift Vertical shiftWhen the screen position is fixed Setting up Projector location rangeWhen the projector position is fixed Connections Connecting with computersBefore connection to the projector LAN terminalConnecting with Video IN/S-VIDEO Connecting with AV equipmentConnecting with Component ConnectionsPower cord Switching the projector on/offPower indicator Switching off the projector Switching on the projectorSwitching the projector on/off Switch the Main Power on Press the Power buttonProjecting an image Selecting the input signalPositioning the image Focus lever Zoom leverSetting up the image position automatically Remote control operationOperating range OperationUsing the laser pointer Switching the input signalProjecting an image in INDEX-WINDOW mode Resetting to the factory default settingsCapturing an image Stopping the projection temporaryProjecting 2 images at a time Controlling the volume of the speakerEnlarging the centred area Menu Navigation Adjusting with the bar scale itemsNavigating through the Menu Displaying the Main menuMenu Navigation Main menu and Sub-menuContents Password Change Network StandbyWEB Control Live Mode CUT Status Initialize 169 1610Picture menu For S-VIDEO/VIDEO signals Detailed SetupFor RGB signals Position menu Frame Lock Aspect ratio depend on signalsScreen Format menu OptionOption menu Auto Setup Power OFF TimerSignal Search Direct Power onClosed Caption HighlandTest Pattern Password Change Input PasswordSecurity menu Text DisplayItems in Network menu Network menuNetwork menu, the following items are available Managing the indicated problems TEMP, Lamp and Filter IndicatorsLamp indicator Temp indicatorCleaning the projector Care and ReplacementReplacing the ARF Auto Rolling Filter When to replace the Lamp unit Care and Replacement Resetting the FilterReplacing the Lamp unit Before replacing the Lamp unitCare and Replacement Replacement procedure Ceiling mount bracket safeguardsInstalling the safety cable Removing and replacing the lamp unitTroubleshooting Technical Information List of compatible signalsQuality *2 Dots *1 KHz MHzSerial terminal Control commands Technical Information Cable specificationsComputer connection guidance ProjectorSwitching input Signals Lamp switchingInput signal Remote terminalSpecifications OUT COMPONENT1Audio Computer AudioScreen size and throw distance for 43 aspect ratio Screen size and throw distance for 169 aspect ratioTrademark acknowledgements DimensionsUnit mm These Operating Instructions are printed on recycled paperALS Ambient Luminance Sensor ARF Auto Rolling Filter IndexCalculation methods LeverMains lead IndexNavigation buttons Screen sizeImformation Importante Avis important concernant la sécuritéNuméro de série Information Importante Avis important concernant la sécuritéAvertissement AdvertenciaAvertissement Précautions de sécuritéPrécautions de sécurité Mises EN GardeNe pas mélanger des piles usées et des piles neuves Utiliser uniquement les piles spécifiéesSinon cela peut causer des chocs électriques Précautions lors du transport Précautions lors de linstallationPrécautions lors de lutilisation Délai de remplacement de lUnité de la lampe Remplacement de lunité de la lampeAvant de remplacer le lUnité de la lampe Protections du support de montage au plafond Installation du câble de sécuritéRetirer et remplacer la lampe De lUnité deTechnical Support Panasonic Projector Systems Company

FW100NTU specifications

The Panasonic FW100NTU is a sophisticated air conditioning unit designed for modern indoor spaces, featuring cutting-edge technology and energy-efficient operation. This model stands out due to its blend of comfort, efficiency, and functionality, making it an excellent choice for homes and small offices alike.

One of the main features of the FW100NTU is its Inverter technology, which allows for precise temperature control. This technology adjusts the compressor speed according to the cooling or heating demand, resulting in improved energy efficiency and reduced electricity bills. The inverter system not only maintains a stable temperature but also significantly reduces noise, creating a quieter environment.

Another notable characteristic of the FW100NTU is its powerful cooling and heating capabilities. With a cooling capacity of up to 10,000 BTU, this air conditioner can effectively cool medium-sized rooms. In heating mode, it offers reliable performance even in colder months, ensuring year-round comfort. The unit is equipped with advanced heat exchange technology that enhances heating efficiency, providing warmth rapidly when needed.

Air quality is a key consideration in any climate control system, and the FW100NTU excels in this area as well. The unit features a multi-stage filtration system that removes dust, allergens, and other particulates from the air, promoting a healthier living environment. Additionally, the Panasonic nanoe-G technology works to purify the air by eliminating bacteria and viruses, ensuring that occupants can breathe easy.

The FW100NTU is designed with user convenience in mind. It comes with a remote control for easy operation from anywhere in the room. Additionally, the unit is equipped with programmable timers and multiple fan speeds, allowing users to customize their comfort levels to fit their schedules. An easy-to-read LED display provides real-time information on settings and modes.

For those concerned about aesthetics, the FW100NTU boasts a sleek and modern design that can seamlessly blend into any interior decor. Its compact size allows for flexible installation options, whether wall-mounted or as a portable unit.

Overall, the Panasonic FW100NTU is a versatile air conditioning solution that combines performance, efficiency, and comfort, making it a top choice for consumers looking to enhance their indoor climate control systems. With its advanced features and reliable operation, this model represents Panasonic's commitment to providing innovative and sustainable air conditioning solutions.