Panasonic FW100NTU manual Replacing the Lamp unit, Care and Replacement Resetting the Filter

Page 41

Care and Replacement

Resetting the FILTER

 

 

 

 

REMAINING

 

FILTER REMAINING

 

 

 

 

 

RESET A REMAIN OF A FILETER.

 

1. Turn on the projector and display the FILTER

 

 

 

 

 

 

REMAINING in OPTION menu. Press the ENTER

 

OK

CANCEL

 

button for 3 seconds and the confirmation screen

 

 

will be displayed.

 

 

RETURN

2. Press I to select OK and press the ENTER

 

 

 

SELECT

 

 

button to reset FILTER REMAINING to “0”. See

 

 

 

 

 

ENTER

“FILTER REMAINING” on page 34.

 

 

 

 

 

 

Replacing the Lamp unit

Before replacing the Lamp unit

Switch off the MAIN POWER and disconnect the power plug from the wall outlet. Make sure the Lamp unit and the surroundings are cooled enough.

Prepare a Phillips-head screwdriver.

Contact an Authorized Service Center to purchase a replacement Lamp unit (ET-LAF100).

When the projector is mounted in the ceiling, do not work directly under the projector or put your face closer to the projector.

NOTE:

•Prior to replacing the lamp unit, allow it to cool down to prevent the risk of burns, damage and other hazards.

•Do not attempt replacement with an unauthorized lamp unit.

When to replace the Lamp unit

The Lamp unit is consumable and the brightness decreases by duration of usage. The LAMP indicator will inform you of the replacement timing at 2 800 hours, and at 3 000 hours, the projector will be turned off. Those figures are rough guidance and might be shortened by the usage conditions, characteristics of the Lamp unit, environmental conditions, and so on. You can check the duration of usage time using LAMP RUNTIME in the OPTION menu.

On screen

LAMP indicator

Indication

REPLACE LAMP

Over 2 800 hours

“REPLACE LAMP” is displayed on the

 

upper left of the screen for 30 seconds.

 

 

 

 

“REPLACE LAMP” is displayed on the

Illuminates RED.

Over 3 000 hours

upper left of the screen, and it will stay until

you respond.

 

 

 

 

To clear the screen, press any button.

 

 

 

 

NOTE:

•The guide times, 2 800 and 3 000 hours, are rough estimates based on certain conditions and is not a guaranteed time.

•For more information about the Lamp unit, such as guaranteed time, see the instructions which is provided with the Lamp unit.

Maintenance

ENGLISH - 41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Model No. PT-FW100NTU PT-FW100NTU Important Safety NoticeImportant Information Declaration of Conformity Important Safety NoticeTrade Name PanasonicContents Maintenance SettingsContents AppendixPrecautions with regard to safety Do not set up the projector outdoors Precautions with regard to safetyDo not look into the lens while the projector is being used Use only the specified batteriesDo not put your weight on this projector Remove the used batteries from the remote control promptlyDo not mix old and new batteries Electric shocks can result if this is not doneAccessories Preparation Minimum required setting screenRead this first About Your Projector Remote controlAbout Your Projector Projector bodyTop and front view Control panelOutput by menu operation About Your Projector Back and bottom viewComputer. Selectable for input Calculation methods for screen dimensions Setting upScreen size and throw distance Getting StartedSetting up Front leg adjusters and throwing angleProjection method Mounting in the ceiling and projecting from frontLens shift and positioning Adjusting the Lens shift leverHorizontal shift Vertical shiftWhen the projector position is fixed Setting up Projector location rangeWhen the screen position is fixed Connections Connecting with computersBefore connection to the projector LAN terminalConnecting with Video IN/S-VIDEO Connecting with AV equipmentConnecting with Component ConnectionsPower indicator Switching the projector on/offPower cord Switching off the projector Switching on the projectorSwitching the projector on/off Switch the Main Power on Press the Power buttonProjecting an image Selecting the input signalPositioning the image Focus lever Zoom leverSetting up the image position automatically Remote control operationOperating range OperationUsing the laser pointer Switching the input signalProjecting an image in INDEX-WINDOW mode Resetting to the factory default settingsCapturing an image Stopping the projection temporaryEnlarging the centred area Controlling the volume of the speakerProjecting 2 images at a time Menu Navigation Adjusting with the bar scale itemsNavigating through the Menu Displaying the Main menuMenu Navigation Main menu and Sub-menuContents Password Change Network StandbyWEB Control Live Mode CUT Status Initialize 169 1610Picture menu For RGB signals Detailed SetupFor S-VIDEO/VIDEO signals Position menu Frame Lock Aspect ratio depend on signalsScreen Format menu OptionOption menu Auto Setup Power OFF TimerSignal Search Direct Power onTest Pattern HighlandClosed Caption Password Change Input PasswordSecurity menu Text DisplayNetwork menu, the following items are available Network menuItems in Network menu Managing the indicated problems TEMP, Lamp and Filter IndicatorsLamp indicator Temp indicatorReplacing the ARF Auto Rolling Filter Care and ReplacementCleaning the projector When to replace the Lamp unit Care and Replacement Resetting the FilterReplacing the Lamp unit Before replacing the Lamp unitCare and Replacement Replacement procedure Ceiling mount bracket safeguardsInstalling the safety cable Removing and replacing the lamp unitTroubleshooting Technical Information List of compatible signalsQuality *2 Dots *1 KHz MHzSerial terminal Control commands Technical Information Cable specificationsComputer connection guidance ProjectorSwitching input Signals Lamp switchingInput signal Remote terminalSpecifications OUT COMPONENT1Audio Computer AudioScreen size and throw distance for 43 aspect ratio Screen size and throw distance for 169 aspect ratioTrademark acknowledgements DimensionsUnit mm These Operating Instructions are printed on recycled paperALS Ambient Luminance Sensor ARF Auto Rolling Filter IndexCalculation methods LeverMains lead IndexNavigation buttons Screen sizeNuméro de série Avis important concernant la sécuritéImformation Importante Information Importante Avis important concernant la sécuritéAvertissement AdvertenciaAvertissement Précautions de sécuritéPrécautions de sécurité Mises EN GardeSinon cela peut causer des chocs électriques Utiliser uniquement les piles spécifiéesNe pas mélanger des piles usées et des piles neuves Précautions lors de lutilisation Précautions lors de linstallationPrécautions lors du transport Avant de remplacer le lUnité de la lampe Remplacement de lunité de la lampeDélai de remplacement de lUnité de la lampe Protections du support de montage au plafond Installation du câble de sécuritéRetirer et remplacer la lampe De lUnité deTechnical Support Panasonic Projector Systems Company

FW100NTU specifications

The Panasonic FW100NTU is a sophisticated air conditioning unit designed for modern indoor spaces, featuring cutting-edge technology and energy-efficient operation. This model stands out due to its blend of comfort, efficiency, and functionality, making it an excellent choice for homes and small offices alike.

One of the main features of the FW100NTU is its Inverter technology, which allows for precise temperature control. This technology adjusts the compressor speed according to the cooling or heating demand, resulting in improved energy efficiency and reduced electricity bills. The inverter system not only maintains a stable temperature but also significantly reduces noise, creating a quieter environment.

Another notable characteristic of the FW100NTU is its powerful cooling and heating capabilities. With a cooling capacity of up to 10,000 BTU, this air conditioner can effectively cool medium-sized rooms. In heating mode, it offers reliable performance even in colder months, ensuring year-round comfort. The unit is equipped with advanced heat exchange technology that enhances heating efficiency, providing warmth rapidly when needed.

Air quality is a key consideration in any climate control system, and the FW100NTU excels in this area as well. The unit features a multi-stage filtration system that removes dust, allergens, and other particulates from the air, promoting a healthier living environment. Additionally, the Panasonic nanoe-G technology works to purify the air by eliminating bacteria and viruses, ensuring that occupants can breathe easy.

The FW100NTU is designed with user convenience in mind. It comes with a remote control for easy operation from anywhere in the room. Additionally, the unit is equipped with programmable timers and multiple fan speeds, allowing users to customize their comfort levels to fit their schedules. An easy-to-read LED display provides real-time information on settings and modes.

For those concerned about aesthetics, the FW100NTU boasts a sleek and modern design that can seamlessly blend into any interior decor. Its compact size allows for flexible installation options, whether wall-mounted or as a portable unit.

Overall, the Panasonic FW100NTU is a versatile air conditioning solution that combines performance, efficiency, and comfort, making it a top choice for consumers looking to enhance their indoor climate control systems. With its advanced features and reliable operation, this model represents Panasonic's commitment to providing innovative and sustainable air conditioning solutions.
Top Page Image Contents