Panasonic FW100NTU manual Switching the projector on/off, Power cord, Power indicator

Page 20

Switching the projector on/off

Power cord

Connecting

1.Make sure the shape of the power plug and

the AC IN connector on the back of the

projector match, then

push the plug all the way in.

2. Connect the Power cord to a wall outlet.

Disconnecting

1.Make sure the MAIN POWER is switched off and unplug the Power cord from the wall outlet.

2.Hold the plug and unplug the Power cord from the AC IN connector on the back of the projector.

Direct power off function

You can disconnect the Power cord from the projector or switch off the MAIN POWER button while projecting or soon after projecting. The internal lamp cooling fan will keep operating by the internal power supply.

NOTE:

•If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take a while to start the projection.

Direct power on function

If you activate the DIRECT POWER ON, you can start the projection only with connecting the Power cord or switching on the MAIN POWER. See “DIRECT POWER ON” on page 35.

Basic Operation

NOTE:

•Do not use other than a provided Power cord.

•Ensure all the input devices are connected and turned off before connecting the Power cord.

•Do not force the connector as this may damage the projector and/or the power cord.

•Dirt or dust build-up around plugs may cause fire or electrical hazards.

•Switch off the power to the projector when not in use.

POWER indicator

POWER indicator

Indicator status

Status

 

 

 

No illumination or flashing

The MAIN POWER is switched off.

 

 

 

 

 

The MAIN POWER is switched on and the projector is in standby.

RED

Lit

When the LAMP or TEMP indicator is flashing, the POWER indicator will

 

not be lit.

 

 

 

 

Flashing

Network connection is ready while the POWER is turned off.

 

 

 

GREEN

Flashing

The POWER is switched on and the projector is getting ready to project.

 

 

Lit

The projector is ready to project.

 

 

 

 

 

Lit

The POWER is switched off and the projector is cooling the lamp.

ORANGE

 

 

Flashing

The POWER is switched on again when cooling the lamp and recovering

 

 

to projection mode. Recovery may take a while.

 

 

 

 

 

NOTE:

•If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take a while to start the projection.

•The electric consumption in standby mode is 4 W.

ENGLISH - 20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Model No. PT-FW100NTU PT-FW100NTU Important Safety NoticeImportant Information Important Safety Notice Declaration of ConformityTrade Name PanasonicContents Settings MaintenanceContents AppendixPrecautions with regard to safety Precautions with regard to safety Do not set up the projector outdoorsDo not look into the lens while the projector is being used Use only the specified batteriesRemove the used batteries from the remote control promptly Do not put your weight on this projectorDo not mix old and new batteries Electric shocks can result if this is not doneAccessories Preparation Minimum required setting screenRead this first Remote control About Your ProjectorProjector body About Your ProjectorTop and front view Control panelOutput by menu operation About Your Projector Back and bottom viewComputer. Selectable for input Setting up Calculation methods for screen dimensionsScreen size and throw distance Getting StartedFront leg adjusters and throwing angle Setting upProjection method Mounting in the ceiling and projecting from frontAdjusting the Lens shift lever Lens shift and positioningHorizontal shift Vertical shiftWhen the projector position is fixed Setting up Projector location rangeWhen the screen position is fixed Connecting with computers ConnectionsBefore connection to the projector LAN terminalConnecting with AV equipment Connecting with Video IN/S-VIDEOConnecting with Component ConnectionsPower indicator Switching the projector on/offPower cord Switching on the projector Switching off the projectorSwitching the projector on/off Switch the Main Power on Press the Power buttonSelecting the input signal Projecting an imagePositioning the image Focus lever Zoom leverRemote control operation Setting up the image position automaticallyOperating range OperationSwitching the input signal Using the laser pointerResetting to the factory default settings Projecting an image in INDEX-WINDOW modeCapturing an image Stopping the projection temporaryEnlarging the centred area Controlling the volume of the speakerProjecting 2 images at a time Adjusting with the bar scale items Menu NavigationNavigating through the Menu Displaying the Main menuMain menu and Sub-menu Menu NavigationPassword Change Network Standby ContentsWEB Control Live Mode CUT Status Initialize 169 1610Picture menu For RGB signals Detailed SetupFor S-VIDEO/VIDEO signals Position menu Aspect ratio depend on signals Frame LockScreen Format menu OptionOption menu Power OFF Timer Auto SetupSignal Search Direct Power onTest Pattern HighlandClosed Caption Input Password Password ChangeSecurity menu Text DisplayNetwork menu, the following items are available Network menuItems in Network menu TEMP, Lamp and Filter Indicators Managing the indicated problemsLamp indicator Temp indicatorReplacing the ARF Auto Rolling Filter Care and ReplacementCleaning the projector Care and Replacement Resetting the Filter When to replace the Lamp unitReplacing the Lamp unit Before replacing the Lamp unitCeiling mount bracket safeguards Care and Replacement Replacement procedureInstalling the safety cable Removing and replacing the lamp unitTroubleshooting List of compatible signals Technical InformationQuality *2 Dots *1 KHz MHzSerial terminal Technical Information Cable specifications Control commandsComputer connection guidance ProjectorLamp switching Switching input SignalsInput signal Remote terminalSpecifications COMPONENT1 OUTAudio Computer AudioScreen size and throw distance for 169 aspect ratio Screen size and throw distance for 43 aspect ratioDimensions Trademark acknowledgementsUnit mm These Operating Instructions are printed on recycled paperIndex ALS Ambient Luminance Sensor ARF Auto Rolling FilterCalculation methods LeverIndex Mains leadNavigation buttons Screen sizeNuméro de série Avis important concernant la sécuritéImformation Importante Avis important concernant la sécurité Information ImportanteAvertissement AdvertenciaPrécautions de sécurité AvertissementMises EN Garde Précautions de sécuritéSinon cela peut causer des chocs électriques Utiliser uniquement les piles spécifiéesNe pas mélanger des piles usées et des piles neuves Précautions lors de lutilisation Précautions lors de linstallationPrécautions lors du transport Avant de remplacer le lUnité de la lampe Remplacement de lunité de la lampeDélai de remplacement de lUnité de la lampe Installation du câble de sécurité Protections du support de montage au plafondRetirer et remplacer la lampe De lUnité dePanasonic Projector Systems Company Technical Support

FW100NTU specifications

The Panasonic FW100NTU is a sophisticated air conditioning unit designed for modern indoor spaces, featuring cutting-edge technology and energy-efficient operation. This model stands out due to its blend of comfort, efficiency, and functionality, making it an excellent choice for homes and small offices alike.

One of the main features of the FW100NTU is its Inverter technology, which allows for precise temperature control. This technology adjusts the compressor speed according to the cooling or heating demand, resulting in improved energy efficiency and reduced electricity bills. The inverter system not only maintains a stable temperature but also significantly reduces noise, creating a quieter environment.

Another notable characteristic of the FW100NTU is its powerful cooling and heating capabilities. With a cooling capacity of up to 10,000 BTU, this air conditioner can effectively cool medium-sized rooms. In heating mode, it offers reliable performance even in colder months, ensuring year-round comfort. The unit is equipped with advanced heat exchange technology that enhances heating efficiency, providing warmth rapidly when needed.

Air quality is a key consideration in any climate control system, and the FW100NTU excels in this area as well. The unit features a multi-stage filtration system that removes dust, allergens, and other particulates from the air, promoting a healthier living environment. Additionally, the Panasonic nanoe-G technology works to purify the air by eliminating bacteria and viruses, ensuring that occupants can breathe easy.

The FW100NTU is designed with user convenience in mind. It comes with a remote control for easy operation from anywhere in the room. Additionally, the unit is equipped with programmable timers and multiple fan speeds, allowing users to customize their comfort levels to fit their schedules. An easy-to-read LED display provides real-time information on settings and modes.

For those concerned about aesthetics, the FW100NTU boasts a sleek and modern design that can seamlessly blend into any interior decor. Its compact size allows for flexible installation options, whether wall-mounted or as a portable unit.

Overall, the Panasonic FW100NTU is a versatile air conditioning solution that combines performance, efficiency, and comfort, making it a top choice for consumers looking to enhance their indoor climate control systems. With its advanced features and reliable operation, this model represents Panasonic's commitment to providing innovative and sustainable air conditioning solutions.
Top Page Image Contents