Panasonic FW100NTU manual Projecting an image, Selecting the input signal, Positioning the image

Page 22

Projecting an image

Selecting the input signal

1. Switch on the connected devices.

Press the play button of the required device.

2.Press the INPUT SELECT buttons to select the required input method if needed. See “Switching the input signal” on page 24.

The image will be projected on the screen.

NOTE:

•SIGNAL SEARCH is ON as default and the signal from the connected devices is detected automatically. See “SIGNAL SEARCH” on page 35.

Basic Operation

Positioning the image

1.Open the Front panel cover.

2.Adjust the projected image with the Lens shift lever. See “Lens shift and positioning” on page 16.

3. Adjust the angle of the projector.

Screw down the Front leg adjusters and adjust the angle vertically.

See “Front leg adjusters and throwing angle” on page 15.

4.Adjust the focus and the projected image size.

Turn the Focus lever and Zoom lever to adjust the image.

You can confirm the adjusted effect with the TEST PATTERN in OPTION menu. See “TEST PATTERN” on page 36.

Focus lever

Zoom lever

NOTE:

•Do not touch the Air Exhaust port as this may cause burns or injury.

•If keystone distortion occurs, see “KEYSTONE” on page 32.

•If you adjust the focus, you may need to adjust the size of the image by moving the Zoom lever again.

ENGLISH - 22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Model No. PT-FW100NTU Important Information Important Safety NoticePT-FW100NTU Trade Name Important Safety NoticeDeclaration of Conformity PanasonicContents Contents SettingsMaintenance AppendixPrecautions with regard to safety Do not look into the lens while the projector is being used Precautions with regard to safetyDo not set up the projector outdoors Use only the specified batteriesDo not mix old and new batteries Remove the used batteries from the remote control promptlyDo not put your weight on this projector Electric shocks can result if this is not doneAccessories Read this first Minimum required setting screenPreparation Remote control About Your ProjectorTop and front view Projector bodyAbout Your Projector Control panelComputer. Selectable for input About Your Projector Back and bottom viewOutput by menu operation Screen size and throw distance Setting upCalculation methods for screen dimensions Getting StartedProjection method Front leg adjusters and throwing angleSetting up Mounting in the ceiling and projecting from frontHorizontal shift Adjusting the Lens shift leverLens shift and positioning Vertical shiftWhen the screen position is fixed Setting up Projector location rangeWhen the projector position is fixed Before connection to the projector Connecting with computersConnections LAN terminalConnecting with Component Connecting with AV equipmentConnecting with Video IN/S-VIDEO ConnectionsPower cord Switching the projector on/offPower indicator Switching the projector on/off Switching on the projectorSwitching off the projector Switch the Main Power on Press the Power buttonPositioning the image Selecting the input signalProjecting an image Focus lever Zoom leverOperating range Remote control operationSetting up the image position automatically OperationSwitching the input signal Using the laser pointerCapturing an image Resetting to the factory default settingsProjecting an image in INDEX-WINDOW mode Stopping the projection temporaryProjecting 2 images at a time Controlling the volume of the speakerEnlarging the centred area Navigating through the Menu Adjusting with the bar scale itemsMenu Navigation Displaying the Main menuMain menu and Sub-menu Menu NavigationWEB Control Live Mode CUT Status Initialize Password Change Network StandbyContents 169 1610Picture menu For S-VIDEO/VIDEO signals Detailed SetupFor RGB signals Position menu Screen Format menu Aspect ratio depend on signalsFrame Lock OptionOption menu Signal Search Power OFF TimerAuto Setup Direct Power onClosed Caption HighlandTest Pattern Security menu Input PasswordPassword Change Text DisplayItems in Network menu Network menuNetwork menu, the following items are available Lamp indicator TEMP, Lamp and Filter IndicatorsManaging the indicated problems Temp indicatorCleaning the projector Care and ReplacementReplacing the ARF Auto Rolling Filter Replacing the Lamp unit Care and Replacement Resetting the FilterWhen to replace the Lamp unit Before replacing the Lamp unitInstalling the safety cable Ceiling mount bracket safeguardsCare and Replacement Replacement procedure Removing and replacing the lamp unitTroubleshooting Quality *2 List of compatible signalsTechnical Information Dots *1 KHz MHzSerial terminal Computer connection guidance Technical Information Cable specificationsControl commands ProjectorInput signal Lamp switchingSwitching input Signals Remote terminalSpecifications Audio COMPONENT1OUT Computer AudioScreen size and throw distance for 169 aspect ratio Screen size and throw distance for 43 aspect ratioUnit mm DimensionsTrademark acknowledgements These Operating Instructions are printed on recycled paperCalculation methods IndexALS Ambient Luminance Sensor ARF Auto Rolling Filter LeverNavigation buttons IndexMains lead Screen sizeImformation Importante Avis important concernant la sécuritéNuméro de série Avertissement Avis important concernant la sécuritéInformation Importante AdvertenciaPrécautions de sécurité AvertissementMises EN Garde Précautions de sécuritéNe pas mélanger des piles usées et des piles neuves Utiliser uniquement les piles spécifiéesSinon cela peut causer des chocs électriques Précautions lors du transport Précautions lors de linstallationPrécautions lors de lutilisation Délai de remplacement de lUnité de la lampe Remplacement de lunité de la lampeAvant de remplacer le lUnité de la lampe Retirer et remplacer la lampe Installation du câble de sécuritéProtections du support de montage au plafond De lUnité dePanasonic Projector Systems Company Technical Support

FW100NTU specifications

The Panasonic FW100NTU is a sophisticated air conditioning unit designed for modern indoor spaces, featuring cutting-edge technology and energy-efficient operation. This model stands out due to its blend of comfort, efficiency, and functionality, making it an excellent choice for homes and small offices alike.

One of the main features of the FW100NTU is its Inverter technology, which allows for precise temperature control. This technology adjusts the compressor speed according to the cooling or heating demand, resulting in improved energy efficiency and reduced electricity bills. The inverter system not only maintains a stable temperature but also significantly reduces noise, creating a quieter environment.

Another notable characteristic of the FW100NTU is its powerful cooling and heating capabilities. With a cooling capacity of up to 10,000 BTU, this air conditioner can effectively cool medium-sized rooms. In heating mode, it offers reliable performance even in colder months, ensuring year-round comfort. The unit is equipped with advanced heat exchange technology that enhances heating efficiency, providing warmth rapidly when needed.

Air quality is a key consideration in any climate control system, and the FW100NTU excels in this area as well. The unit features a multi-stage filtration system that removes dust, allergens, and other particulates from the air, promoting a healthier living environment. Additionally, the Panasonic nanoe-G technology works to purify the air by eliminating bacteria and viruses, ensuring that occupants can breathe easy.

The FW100NTU is designed with user convenience in mind. It comes with a remote control for easy operation from anywhere in the room. Additionally, the unit is equipped with programmable timers and multiple fan speeds, allowing users to customize their comfort levels to fit their schedules. An easy-to-read LED display provides real-time information on settings and modes.

For those concerned about aesthetics, the FW100NTU boasts a sleek and modern design that can seamlessly blend into any interior decor. Its compact size allows for flexible installation options, whether wall-mounted or as a portable unit.

Overall, the Panasonic FW100NTU is a versatile air conditioning solution that combines performance, efficiency, and comfort, making it a top choice for consumers looking to enhance their indoor climate control systems. With its advanced features and reliable operation, this model represents Panasonic's commitment to providing innovative and sustainable air conditioning solutions.
Top Page Image Contents