Panasonic PT-AE3000E manual Projecting an image, Selecting the input signal, Positioning the image

Page 22

Projecting an image

Basic Operation

Selecting the input signal

1. Switch on the connected devices.

Press the play button of the required device.

2.Press the INPUT SELECT button to select the required input method if needed. See “Switching the input signal” on page 28.

The image will be projected on the screen.

Positioning the image

1.Press the ASPECT button to select the required aspect mode. See “Switching the aspect ratio” on page 24.

2.Adjust the projected image with the lens shift dials. See “Lens shift and positioning” on page 16.

3. Adjust the angle of the projector.

Screw down the front leg adjusters and adjust the angle vertically.

See “Front leg adjusters and throwing angle” on page 15.

NOTE:

•AUTO SEARCH is ON as default and the signal from the connected devices is detected automatically. See “AUTO SEARCH” on page 43.

4.Adjust the focus and the projected image size.

Press +/- of the FOCUS and ZOOM buttons to adjust.

Press the LENS button to adjust the focus and zoom by the remote control. See “LENS CONTROL” on page 40.

NOTE:

•Do not touch the air exhaust port as this may cause burns or injury.

•If keystone distortion occurs, see “KEYSTONE” on page 39.

•If you adjust the focus, you may need to adjust the size of the image by pressing the ZOOM button again.

22 - ENGLISH

Image 22

Contents Operating Instructions This Apparatus Must be Earthed Important Safety NoticeFor business users in the European Union To rain or moistureImportant Safety Notice Important the Moulded Plug U.K. onlyContents Picture menu ContentsMenu Navigation Lens ControlPrecautions with regard to safety Do not set up the projector outdoors Precautions with regard to safetyDo not look into the lens while the projector is being used Use only the specified batteries Remove the used batteries from the remote control promptlyDo not put your weight on this projector Do not mix old and new batteriesDo not touch the surfaces of the lens with your bare hands Projector may be subject to electromagnetic interferenceOrder to get the best picture quality Liquid crystal panelPT-AE3000E TTRA0141 AccessoriesRemote control for Safety cable Lens cover Mains lead for UKRemote control About Your ProjectorAbout Your Projector Projector bodyTop and front view Hdmi About Your Projector Back and bottom viewComputer ComponentCalculation methods for screen dimensions Setting upScreen size and throw distance Projection method Front leg adjusters and throwing angleSetting up Mounting on the ceiling and projecting from frontHorizontal shift Adjusting the lens shift dialsLens shift and positioning Vertical shiftWhen the projector position is fixed Setting up Projector location rangeWhen the screen position is fixed 100% 40%Connecting example Hdmi IN/COMPUTER Before connecting to the projectorConnecting example Component IN/S-VIDEO ConnectionsMains lead Switching the projector on/offConnecting Connect the mains lead to a mains socketSwitching the projector on/off Power indicatorPower indicator informs you the status of the power Switching off the projector Switching on the projectorPress I to select OK and press the power or Enter button Adjust the focus and the projected image size Selecting the input signalSwitch on the connected devices Projecting an imageSwitching the picture mode Remote control operationManaging the lens control settings Adjusting the imageAdjusting the signal condition with a waveform Loading a saved settingSwitching the aspect ratio Remote control operationAdjusting with RGB options Adjustment exampleAdjusting with luminance options Contrast G/CONTRAST BCreate a new profile Setting your own colour profileAdjusting the selected colour Managing stored logsChanging the profile names Saving a log setting as a profileDeleting the saved profiles Loading saved profilesUsing the assigned function as shortcut Resetting to the factory default settingsSwitching the input signal Capturing an imageNavigating through the Menu Adjusting with the bar scale itemsMenu Navigation Displaying the main menuMain menu and sub-menu Menu NavigationLanguage Lens Control Picture menu Dynamic Iris Colour TemperatureSplit Adjust Waveform MonitorAdjusting the image in a split window NR Noise ReductionColour Memory Load Signal ModeMemory Save Memory EditPosition Clock PhasePosition menu DOT ClockZoom Component signalsPosition menu Aspect ratio options and projection example FITOver Scan Auto SetupWSS KeystoneLens Memory Load Adjust ZOOM/FOCUS, H-AREA PositionZOOM/FOCUS Lens Memory SaveRename the lens memory setting You can edit named lens memory settingsLens Memory Edit Blank function Underlined item is factory default settingButton Assignable functionsOption menu Lamp Power InstallationHigh Altitude Mode SleepLamp indicator Temp and Lamp IndicatorsManaging the indicated problems Temp indicatorCare and Replacement Cleaning the projectorReplacing the lamp unit Care and ReplacementWhen to replace the lamp unit Before replacing the lamp unitResetting the Lamp Runtime Care and Replacement Removing and replacing the lamp unitAttaching the top cover Troubleshooting Quality *2 List of compatible signalsTechnical Information Dots *1 MHz KHzSerial terminal Technical Information Communication settings Control commandsInquiry commands Specifications Component VideoComputer HdmiInstalling the safety cable Ceiling mount bracket safeguardsLoop twice Loop once Trademark acknowledgements DimensionsUnit mm Index Main menu Indicator status Remote control buttonIndex Control panel button