Remote control operation
Basic Operation
Setting your own color profile
You can adjust a selected color individually and save and retrieve under the PICTURE MODE setting. Press the COLOR MANAGEMENT button to open the menu. See “COLOR MANAGEMENT” on page 35.
PROFILE | NORMAL |
|
CURSOR
LOG
PROFILE SAVE
PROFILE DELETE
PROFILE NAME CHANGE
Create a new profile
Adjusting the selected color
Select a color and adjust COLOR, TINT and
BRIGHTNESS.
1.Select the CURSOR menu and press ENTER.
The projected image is captured, and the target cursor is displayed.
When the LOG is fully stored, the target cursor will not be displayed.
Target cursor
2.Move the cursor with F G I H to the required place to select a color and press ENTER.
The color at the center of the target cursor is sampled and the sample box is displayed on the left of the cursor. The menu items are displayed on the upper part of the screen.
You may fail to adjust when the very edge point of the projection area is selected as sample.
CURSOR
| RETURN | COLOR | |
|
| ||
SELECT | ENTER | TINT | |
BRIGHTNESS | |||
| |||
DEFAULT | |||
| |||
Sampled color
3.Select a menu item and the I H to adjust each item level.
The result box is displayed on the right of the cursor and shows the adjusted color.
CURSOR |
|
| |
| RETURN | COLOR | |
|
| ||
SELECT | ENTER | TINT | |
BRIGHTNESS | |||
| |||
DEFAULT | |||
| |||
|
| Adjusted color | |
COLOR | Adjust the vividness of the color. | |
Setting range: | ||
| ||
TINT | Adjust the color tone. | |
Setting range: | ||
| ||
BRIGHTNESS | Adjust the brightness of the color. | |
Setting range: |
4. Press ENTER to store the adjusted result.
“PROCESSING” is displayed for a few seconds and the result is stored in LOG.
You can store up to 8 logs under LOG for each PICTURE MODE setting.
5.Press MENU or RETURN to return to the previous menu.
Repeat the steps above to store more adjustment.
Managing stored logs
You can edit or delete the stored logs of the selected PICTURE MODE.
1.Select LOG and press ENTER.
The LOG menu is displayed.
PICTURE MODE : CINEMA1
POINT1
POINT2
POINT3
POINT4
POINT5
POINT6
POINT7
POINT8
ALL DELETE
Sampled color 
Adjusted color
2.Select the required log from 1 - 8 or ALL DELETE, and press ENTER.
Select CHANGE to edit the log.
The cursor menu is displayed and you can readjust the color.
Select DELETE to delete the log.
The confirmation screen will be displayed. Select OK to delete.
When you select ALL DELETE, the "DELETE ALL LOG." screen is displayed. Select OK to delete all logs. The PROFILE setting will be set to NORMAL.