Panasonic PT-AE3000U manual Picture menu

Page 32

PICTURE menu

Remote control		Control panel

See “Navigating through the MENU” on page 29. See “Main menu and sub-menu” on page 30.

CONTRAST

You can adjust the contrast of the projected image. Adjust the BRIGHTNESS in advance if necessary.

LowerHigher

Setting range: -64 to +64

Settings

PICTURE MODE

Depending on the projection environment, you can use these preset parameter settings to optimise image projection. Press I H to cycle through the options.

NORMAL										CINEMA3
NORMAL										CINEMA3

DYNAMIC

CINEMA2

COLOR1

COLOR2

CINEMA1

Setting for a general image, such

NORMAL

as sports programme or TV

games

DYNAMIC

Bright and sharp setting

Setting for HDTV standard in ITU-

COLOR1

R BT. 709 and color temperature

6 500 K at the default setting of

the PICTURE menu items.

Setting for DCDM standard

(SMPTE431-2) and color

COLOR2

temperature 6 300 K at the

default setting of the PICTURE

menu items.

CINEMA1

Setting tuned by top Hollywood

colorists

CINEMA2

Deeper and more rich color

setting

CINEMA3

Vivid and crisp color setting

NOTE:

•It may take for a while until the selected mode is stabilised.

BRIGHTNESS

You can adjust the brightness of the projected image.

DarkerBrighter

Setting range: -32 to +32

COLOR

You can adjust the color saturation of the projected image.

Lighter Darker

Setting range: -32 to +32

When COMPUTER signal is connected, only available

with the following signals.
1 125	(1 080)/60i	1 125	(1 080)/50i
1 125	(1 080)/60p	1 125	(1 080)/50p

TINT

You can adjust the skin tone in the projected image.

More More

reddish greenish

Setting range: -32 to +32

When COMPUTER signal is connected, only available with the following signals.

1 125	(1	080)/60i	1 125	(1	080)/50i
1 125	(1	080)/60p	1 125	(1	080)/50p

SHARPNESS

You can adjust the sharpness of the projected image.

Less	More
sharp	sharp

Setting range will vary according to the selected input signal.

32 - ENGLISH

Image 32

Contents Operating Instructions Important Safety Notice Dear Panasonic CustomerImportant Safety Notice Declaration of ConformityModel Number PT-AE3000U Trade Name PanasonicContents Contents Menu NavigationPicture menu Lens ControlPrecautions with regard to safety Do not look into the lens while the projector is being used Precautions with regard to safetyDo not set up the projector outdoors Remove the used batteries from the remote control promptly Do not put your weight on this projectorUse only the specified batteries Do not mix old and new batteriesProjector may be subject to electromagnetic interference Order to get the best picture qualityDo not touch the surfaces of the lens with your bare hands Liquid crystal panelAccessories Remote control for Safety cable Lens coverPower cord Power cord secure lockRemote control About Your ProjectorTop and front view Projector bodyAbout Your Projector About Your Projector Back and bottom view ComputerHdmi ComponentScreen size and throw distance Setting upCalculation methods for screen dimensions Front leg adjusters and throwing angle Setting upProjection method Mounting on the ceiling and projecting from frontAdjusting the lens shift dials Lens shift and positioningHorizontal shift Vertical shiftSetting up Projector location range When the screen position is fixedWhen the projector position is fixed 100%Before connecting to the projector Connecting example Component IN/S-VIDEOConnecting example Hdmi IN/COMPUTER ConnectionsSwitching the projector on/off Power cordConnecting Connect the power cord to a wall outletPower indicator informs you the status of the power Power indicatorSwitching the projector on/off Press the power or Enter button Switching on the projectorSwitching off the projector Selecting the input signal Switch on the connected devicesAdjust the focus and the projected image size Projecting an imageRemote control operation Managing the lens control settingsSwitching the picture mode Adjusting the imageLoading a saved setting Switching the aspect ratioAdjusting the signal condition with a waveform Remote control operationAdjustment example Adjusting with luminance optionsAdjusting with RGB options Contrast G/CONTRAST BSetting your own color profile Adjusting the selected colorCreate a new profile Managing stored logsSaving a log setting as a profile Deleting the saved profilesChanging the profile names Loading saved profilesResetting to the factory default settings Switching the input signalUsing the assigned function as shortcut Capturing an imageAdjusting with the bar scale items Menu NavigationNavigating through the Menu Displaying the main menuMain menu and sub-menu Menu NavigationLanguage Lens Control Picture menu Color Temperature Split AdjustDynamic Iris Waveform MonitorAdjusting the image in a split window NR Noise ReductionColor Standard xvYCCSignal Mode Memory SaveMemory Load Memory EditClock Phase Position menuPosition DOT ClockComponent signals Position menu Aspect ratio options and projection exampleZoom FITAuto Setup WSSOver Scan KeystoneAdjust ZOOM/FOCUS, H-AREA Position ZOOM/FOCUSLens Memory Load Lens Memory SaveYou can edit named lens memory settings Lens Memory EditArea Position Select Lens Memory Name Change and press the Enter buttonUnderlined item is factory default setting ButtonBlank function Assignable functionsOption menu Installation High Altitude ModeLamp Power SleepTemp and Lamp Indicators Managing the indicated problemsLamp indicator Temp indicatorCare and Replacement Cleaning the projectorCare and Replacement When to replace the lamp unitReplacing the lamp unit Before replacing the lamp unitAttaching the top cover Care and Replacement Removing and replacing the lamp unitResetting the Lamp Runtime Troubleshooting List of compatible signals Technical InformationQuality *2 Dots *1 MHz KHzSerial terminal Technical Information Communication settings Control commandsInquiry commands Specifications Video ComputerComponent HdmiLoop twice Loop once Ceiling mount bracket safeguardsInstalling the safety cable Unit mm DimensionsTrademark acknowledgements Index Index

Related manuals

Manual 60 pages 38.77 Kb