Panasonic PT-AE3000U manual Zoom/Focus, Lens Memory Load, Lens Memory Save, Area Position

Page 40

LENS CONTROL

Settings

Remote control

 

Control panel

 

 

 

 

 

 

 

 

 

 

 

 

See “Navigating through the MENU” on page 29. See “Main menu and sub-menu” on page 30.

NOTE:

•The saved lens memory adjustment accuracy is not guaranteed.

•If the memorized ZOOM/FOCUS adjustment is not accurate enough, adjust the ZOOM/FOCUS menu again.

•If the power supply is stopped while loading or saving the lens memory, saved adjusted settings may differ from the original after restart the projector. Adjust the ZOOM/FOCUS menu again.

ZOOM/FOCUS

You can use the 2 different test patterns to adjust the focus and zoom of the image. See “Lens shift and positioning” on page 16.

1. Press ENTER to display test pattern 1.

Press F G to adjust the focus and I H to adjust the zoom.

RETURN

FOCUS

ENTER

ZOOM

2. Press ENTER to display test pattern 2.

Press F G to adjust the focus and I H to adjust the zoom.

LENS MEMORY LOAD

You can access the saved lens control settings instantly.

1.Select a setting from LENS MEMORY 1 - 3.

2.Press the ENTER button to activate.

NOTE:

•The option that contains no saved adjustment will not be displayed.

•If there is no saved setting, the LENS MEMORY LOAD menu will not be selectable.

LENS MEMORY SAVE

You can save and name the adjusted ZOOM/FOCUS, H-AREA POSITION and V-AREA POSITION settings in memory.

1.Adjust ZOOM/FOCUS, H-AREA POSITION and

V-AREA POSITION.

2.Select the LENS MEMORY SAVE and press the ENTER button.

3.Select the required memory setting and press the ENTER button.

4.The confirmation screen will be displayed. Select OK and press the ENTER button.

Indicated with ★ is in use, and ✩ is empty.

5. Name the lens memory setting.

Use F G I H to specify the location of the required character to enter and press the ENTER button.

LENS MEMORY NAME INPUT

 

ALL DELETE

OK

CANCEL

RETURN

FOCUS

ENTER

ZOOM

3. Press ENTER to display the projected image.

You can confirm the adjustment is fit to the projected image.

4.Press MENU or RETURN to return to the previous menu, or press repeatedly to escape the menu mode.

NOTE:

•When the projector and/or the screen is tilted, adjust the focus at the center of the image. The upper and lower edge might be out of focus.

•When the image is distorted in keystone, adjust the KEYSTONE in POSITION menu. See “KEYSTONE” on page 39.

6.Repeat step 5 until you finish the text line.

You can enter up to 16 characters.

Move the cursor to ALL DELETE and press the ENTER button to delete all the entered text line. Press the DEFAULT button to delete the last entered character or indicted with the cursor in the text box. To insert a character in the entered text line, move the cursor to the text box to select the required place and press G then perform step 5.

7.Select OK and press the ENTER button to set the entered text as a name.

NOTE:

•If you leave the text box empty and save, the default memory number will stay as a name.

40 - ENGLISH

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Operating Instructions Important Safety Notice Dear Panasonic CustomerImportant Safety Notice Declaration of ConformityModel Number PT-AE3000U Trade Name PanasonicContents Contents Menu NavigationPicture menu Lens ControlPrecautions with regard to safety Do not set up the projector outdoors Precautions with regard to safetyDo not look into the lens while the projector is being used Remove the used batteries from the remote control promptly Do not put your weight on this projectorUse only the specified batteries Do not mix old and new batteriesProjector may be subject to electromagnetic interference Order to get the best picture qualityDo not touch the surfaces of the lens with your bare hands Liquid crystal panelAccessories Remote control for Safety cable Lens coverPower cord Power cord secure lockRemote control About Your ProjectorAbout Your Projector Projector bodyTop and front view About Your Projector Back and bottom view ComputerHdmi ComponentCalculation methods for screen dimensions Setting upScreen size and throw distance Front leg adjusters and throwing angle Setting upProjection method Mounting on the ceiling and projecting from frontAdjusting the lens shift dials Lens shift and positioningHorizontal shift Vertical shiftSetting up Projector location range When the screen position is fixedWhen the projector position is fixed 100%Before connecting to the projector Connecting example Component IN/S-VIDEOConnecting example Hdmi IN/COMPUTER ConnectionsSwitching the projector on/off Power cordConnecting Connect the power cord to a wall outletSwitching the projector on/off Power indicatorPower indicator informs you the status of the power Switching off the projector Switching on the projectorPress the power or Enter button Selecting the input signal Switch on the connected devicesAdjust the focus and the projected image size Projecting an imageRemote control operation Managing the lens control settingsSwitching the picture mode Adjusting the imageLoading a saved setting Switching the aspect ratioAdjusting the signal condition with a waveform Remote control operationAdjustment example Adjusting with luminance optionsAdjusting with RGB options Contrast G/CONTRAST BSetting your own color profile Adjusting the selected colorCreate a new profile Managing stored logsSaving a log setting as a profile Deleting the saved profilesChanging the profile names Loading saved profilesResetting to the factory default settings Switching the input signalUsing the assigned function as shortcut Capturing an imageAdjusting with the bar scale items Menu NavigationNavigating through the Menu Displaying the main menuMain menu and sub-menu Menu NavigationLanguage Lens Control Picture menu Color Temperature Split AdjustDynamic Iris Waveform MonitorAdjusting the image in a split window NR Noise ReductionColor Standard xvYCCSignal Mode Memory SaveMemory Load Memory EditClock Phase Position menuPosition DOT ClockComponent signals Position menu Aspect ratio options and projection exampleZoom FITAuto Setup WSSOver Scan KeystoneAdjust ZOOM/FOCUS, H-AREA Position ZOOM/FOCUSLens Memory Load Lens Memory SaveYou can edit named lens memory settings Lens Memory EditArea Position Select Lens Memory Name Change and press the Enter buttonUnderlined item is factory default setting ButtonBlank function Assignable functionsOption menu Installation High Altitude ModeLamp Power SleepTemp and Lamp Indicators Managing the indicated problemsLamp indicator Temp indicatorCare and Replacement Cleaning the projectorCare and Replacement When to replace the lamp unitReplacing the lamp unit Before replacing the lamp unitResetting the Lamp Runtime Care and Replacement Removing and replacing the lamp unitAttaching the top cover Troubleshooting List of compatible signals Technical InformationQuality *2 Dots *1 MHz KHzSerial terminal Technical Information Communication settings Control commandsInquiry commands Specifications Video ComputerComponent HdmiInstalling the safety cable Ceiling mount bracket safeguardsLoop twice Loop once Trademark acknowledgements DimensionsUnit mm Index Index
Related manuals
Manual 60 pages 38.77 Kb
Top Page Image Contents