Panasonic PT-AE3000U manual Technical Information Communication settings, Control commands

Page 52

Technical Information

Communication settings

Signal level	RS-232C	Character length	8 bits
Sync. method	Asynchronous	Stop bit	1 bit
Baud rate	9 600 bps	X parameter	None
Parity	None	S parameter	None

Control commands

	Command	Control contents			Remarks
	PON	POWER ON	In standby mode, all commands other than the PON command are ignored.
	PON	POWER ON	The PON command is ignored during lamp ON control.
			The PON command is ignored during lamp ON control.
	POF	POWER OFF	If a PON command is received while the cooling fan is operating after the lamp has switched
	POF	POWER OFF	off, the lamp is not turned back on again straight away in order to protect the lamp.

			Parameter:		CP2 = COMPONENT2 IN
	IIS		CP1 = COMPONENT1 IN		CP2 = COMPONENT2 IN
	IIS	INPUT	SVD = S-VIDEO IN		VID = VIDEO IN
			HD1 = HDMI1 IN		HD2 = HDMI2 IN
			HD3 = HDMI3 IN		RG1 = COMPUTER IN
	OMN	MAIN	Displaying the main menu.

	OEN	ENTER	Activating the selected items in the menu mode.

	OBK	RETURN	Returning to the previous menu or escaping from the menu mode.

	OCU/OCD/	Navigation buttons	OCU = F button		OCL = I button
	OCL/OCR	Navigation buttons	OCD = G button		OCR = H button
	OCL/OCR		OCD = G button		OCR = H button

	OLE	LENS	Activating the LENS CONTROL menu.

	OST	DEFAULT	Resetting to the factory default setting. (page 28)

	OFZ		Freezing the projected screen.
	OFZ	FREEZE	Parameter:
			0 = OFF		1 = ON
	FC1	FUNCTION BUTTON	Activates the function that is assigned to the FUNCTION button of the remote control.

	OOT		Setting the duration of time to turn off the power automatically. (See “SLEEP” on page 44.)
	OOT	SLEEP	0 = OFF	1 = 60min.	2 = 90min.	3 = 120min.	4 = 150min.
			5 = 180min.	6 = 210min.	7 = 240min.
	OSH		Turning off the projection temporarily.
	OSH	BLANK	Send the command to switch between ON and OFF.
			Do not send the command consecutively.
	OVM	PICTURE	Activating the PICTURE menu. Send the command to switch menu items. (page 23)

			Activating the WAVEFORM.		(page 24)
			Parameter:
	OWM		0 = OFF		5 = SINGLE LINE SCAN (Y)
	OWM	WAVEFORM	1 = FULL SCAN (Y)		5 = SINGLE LINE SCAN (Y)
			2 = FULL SCAN (R)		6 = SINGLE LINE SCAN (R)
			3 = FULL SCAN (G)		7 = SINGLE LINE SCAN (G)
			4 = FULL SCAN (B)		8 = SINGLE LINE SCAN (B)
	VS1	ASPECT	Switching the aspect ratio. (page 24)

			Switching the PICTURE MODE. (page 23)
	VPM	PICTURE MODE	Parameter:
	VPM	PICTURE MODE	NOR = NORMAL	DYN = DYNAMIC CL1 = COLOR1		CL2 = COLOR2
			NOR = NORMAL	DYN = DYNAMIC CL1 = COLOR1		CL2 = COLOR2
			CN1 = CINEMA1	CN2 = CINEMA2 CN3 = CINEMA3

Appendix

52 - ENGLISH

Image 52

Contents Operating Instructions Important Safety Notice Dear Panasonic CustomerImportant Safety Notice Declaration of ConformityModel Number PT-AE3000U Trade Name PanasonicContents Contents Menu NavigationPicture menu Lens ControlPrecautions with regard to safety Do not set up the projector outdoors Precautions with regard to safetyDo not look into the lens while the projector is being used Remove the used batteries from the remote control promptly Do not put your weight on this projectorUse only the specified batteries Do not mix old and new batteriesProjector may be subject to electromagnetic interference Order to get the best picture qualityDo not touch the surfaces of the lens with your bare hands Liquid crystal panelAccessories Remote control for Safety cable Lens coverPower cord Power cord secure lockRemote control About Your ProjectorAbout Your Projector Projector bodyTop and front view About Your Projector Back and bottom view ComputerHdmi ComponentCalculation methods for screen dimensions Setting upScreen size and throw distance Front leg adjusters and throwing angle Setting upProjection method Mounting on the ceiling and projecting from frontAdjusting the lens shift dials Lens shift and positioningHorizontal shift Vertical shiftSetting up Projector location range When the screen position is fixedWhen the projector position is fixed 100%Before connecting to the projector Connecting example Component IN/S-VIDEOConnecting example Hdmi IN/COMPUTER ConnectionsSwitching the projector on/off Power cordConnecting Connect the power cord to a wall outletSwitching the projector on/off Power indicatorPower indicator informs you the status of the power Switching off the projector Switching on the projectorPress the power or Enter button Selecting the input signal Switch on the connected devicesAdjust the focus and the projected image size Projecting an imageRemote control operation Managing the lens control settingsSwitching the picture mode Adjusting the imageLoading a saved setting Switching the aspect ratioAdjusting the signal condition with a waveform Remote control operationAdjustment example Adjusting with luminance optionsAdjusting with RGB options Contrast G/CONTRAST BSetting your own color profile Adjusting the selected colorCreate a new profile Managing stored logsSaving a log setting as a profile Deleting the saved profilesChanging the profile names Loading saved profilesResetting to the factory default settings Switching the input signalUsing the assigned function as shortcut Capturing an imageAdjusting with the bar scale items Menu NavigationNavigating through the Menu Displaying the main menuMain menu and sub-menu Menu NavigationLanguage Lens Control Picture menu Color Temperature Split AdjustDynamic Iris Waveform MonitorAdjusting the image in a split window NR Noise ReductionColor Standard xvYCCSignal Mode Memory SaveMemory Load Memory EditClock Phase Position menuPosition DOT ClockComponent signals Position menu Aspect ratio options and projection exampleZoom FITAuto Setup WSSOver Scan KeystoneAdjust ZOOM/FOCUS, H-AREA Position ZOOM/FOCUSLens Memory Load Lens Memory SaveYou can edit named lens memory settings Lens Memory EditArea Position Select Lens Memory Name Change and press the Enter buttonUnderlined item is factory default setting ButtonBlank function Assignable functionsOption menu Installation High Altitude ModeLamp Power SleepTemp and Lamp Indicators Managing the indicated problemsLamp indicator Temp indicatorCare and Replacement Cleaning the projectorCare and Replacement When to replace the lamp unitReplacing the lamp unit Before replacing the lamp unitResetting the Lamp Runtime Care and Replacement Removing and replacing the lamp unitAttaching the top cover Troubleshooting List of compatible signals Technical InformationQuality *2 Dots *1 MHz KHzSerial terminal Technical Information Communication settings Control commandsInquiry commands Specifications Video ComputerComponent HdmiInstalling the safety cable Ceiling mount bracket safeguardsLoop twice Loop once Trademark acknowledgements DimensionsUnit mm Index Index

Related manuals

Manual 60 pages 38.77 Kb