Panasonic PT-AE1000U manual Projecting an image, Selecting the input signal, Positioning the image

Page 21

Projecting an image

Selecting the input signal

1. Switch on the connected devices.	2. Press the INPUT button to select the required
Press the play button of the required device.	input method if needed. See "Switching the input
	signal" on page 23.
	The image will be projected on the screen.

NOTE:

AUTO SEARCH is ON as default and the signal from the connected devices is detected automatically. See "AUTO SEARCH" on page 38.

Positioning the image

1.Press ASPECT to select the required aspect mode. See "Switching the aspect ratio" on page 23.

2.Adjust the projected image with the Lens shift dials. See "Lens shift and positioning" on page 16.

3. Adjust the angle of the projector.

Screw down the Front leg adjuster and adjust the angle vertically.

NOTE:

Do not touch the Air exhaust port as this may cause burns or injury.

If keystone distortion occurs, see “KEYSTONE” on page 36.

4.Adjust the focus and the projected image size.

Press +/- of the FOCUS and ZOOM buttons to adjust.

Press the LENS button to adjust the focus and zoom by Remote control. see “LENS CONTROL Menu” on page 37

Basic Operation

ENGLISH - 21

Image 21

Contents Operating Instructions PT-AE1000U Important Safety NoticePanasonic Important Safety NoticeContents Settings MaintenanceAppendix Precautions with regard to safety Always disconnect all cables before moving the projector Do not look into the lens while the projector is being usedDo not place any heavy objects on top of the projector Use only the specified batteriesDo not mix old and new batteries Do not put your weight on this projectorAccessories Remote controlBefore use Do not touch the surfaces of the lens with your bare hands Order to get the best picture qualityScreen LampRemote control About Your ProjectorFront, back and top view Top and front view ProjectorBack and bottom view SerialHdmi Component 2 Setting up Calculation methods for screen dimensionsScreen size and throw distance Projection method Front leg adjuster and throwing angleLens shift and positioning Adjusting the Lens shift dialsHorizontal shift Vertical shiftAdjustable projection range Projector location rangeAfter fixing the screen position Connecting with HDMI/PC Connecting with COMPONENT/VIDEO/S-VIDEOConnections Before connection to the projectorPower cord Switching the projector on/offPower indicator ConnectingSwitching on the projector Switching off the projectorPower indicator Selecting the input signal Projecting an imagePositioning the image Resetting to the factory default settings Remote control operationOperating range Turning on the button backlightSwitching the aspect ratio Switching the input signalAdjusting the waveform Adjusting the waveform of the input signalAdjusting in Picture menu Adjusting in Advanced menuSwitching the picture mode Adjusting the focus and zoomAdjusting the image Switching off the projector automaticallyAdjusting the selected color Setting your own color profileCreate a new profile ColorSaving a log setting as a profile Loading saved profilesManaging stored logs Menu Navigation Operating procedureNavigating through the Menu Displaying the Main menuSee Position Menu on Sub-menu items Default setting Sub-menu items Default settingMain menu and Sub-menu 169*5Language Picture Menu Waveform Monitor Dynamic IrisAdvanced Menu NR Noise ReductionMemory Save Signal ModeMemory Load Secam NtscPosition Menu Clock PhaseDOT Clock PositionComponent signals AspectAspect ratio options and projection example Aspect ratio depend on signals Auto SetupWSS Over ScanZOOM/FOCUS Lens Control MenuOption Menu Lamp Power InstallationSleep AltitudeLamp indicator Temp indicator Temp and Lamp IndicatorsLamp indicator Controlling alertsCare and Replacement Before cleaningCleaning your projector Before replacing the Lamp unit When to replace the Lamp unitReplacing the lamp unit Opening the top coverRemoving and replacing the lamp unit Resetting the Lamp RuntimeAttaching the top cover Lamp unit fixing screws Lamp unit lock Press hereTroubleshooting Resolution Frequency Quality*2 Format Dots*1 MHz KHz List of compatible signalsTechnical Information Display Scanning Dot clock Frequency PictureCommunication settings Pin assignments and signal namesSerial terminal Connection Sub 9 pin maleControl commands Cable specifications Inquiry commandsBasic format ProjectorPicture Menu 31 H Menu structurePosition Menu 34 H Lens Control Menu 37 HNTSC/NTSC 4.43/PAL/PAL-M/PAL-N/SECAM SpecificationsHDMI1 IN/HDMI2 Dimensions Trademark acknowledgements DOT Clock Dynamic Iris IndexIndex

Related manuals

Manual 56 pages 56.23 Kb