Panasonic PT-AE1000U manual Setting your own color profile, Create a new profile, Color, Tint

Remote control operation

Setting your own color profile

Basic Operation

You can adjust a selected color individually and save and retrieve under the PICTURE MODE setting. Press the COLOR MANAGEMENT button to open the menu.

PROFILE NORMAL

CURSOR

LOG

PROFILE SAVE

Create a new profile

Adjusting the selected color

Select a color and adjust COLOR, TINT and

BRIGHTNESS.

1.Select the CURSOR menu and press

ENTER.

The projected image is captured, and the target cursor is displayed.

When the LOG is fully stored, the target cursor will not be displayed. See "Managing stored logs" on page 26.

Target cursor

2.Move the cursor with F G I H to the required place to select a color and press

ENTER.

The color at the center of the target cursor is sampled and the sample box is displayed on the left of the cursor. The menu items are displayed on the upper part of the screen.

CURSOR

	RETURN	COLOR
SELECT	ENTER	TINT
		BRIGHTNESS
DEFAULT

3.Select a menu item and the I H to adjust each item level.

The result box is displayed on the right of the cursor and shows the adjusted color.

CURSOR
	RETURN	COLOR
SELECT	ENTER	TINT
		BRIGHTNESS
DEFAULT
		Adjusted color

COLOR	Adjust the vividness of the color.
	Setting range: -30 to +30
TINT	Adjust the color tone.
	Setting range: -30 to +30
BRIGHTNESS	Adjust the brightness of the color.
	Setting range: -20 to +20

4. Press ENTER to store the adjusted result.

“PROCESSING” is displayed for a few seconds and the result is stored in LOG.

You can store up to 8 logs under LOG for each PICTURE MODE setting.

5.Press MENU or RETURN to return to the previous menu.

Repeat the steps above to store more adjustment.

Sampled color

26 - ENGLISH