LENS CONTROL Menu
ZOOM/FOCUS
You can use the 2 different test patterns to adjust the focus and zoom of the image. See “Lens shift and positioning” on page 16.
1. Press ENTER to display test pattern 1.
Press F G to adjust the focus and I H to adjust the zoom.
RETURN | FOCUS |
ENTER | ZOOM |
2. Press ENTER to display test pattern 2.
Press F G to adjust the focus and I H to adjust the zoom.
RETURN | FOCUS |
ENTER | ZOOM |
3. Press ENTER to display the projected image.
You can confirm the adjustment is fit to the projected image.
4. Press MENU or RETURN to return to the previous menu, or press repeatedly to escape the menu mode.
NOTE:
When the projector and/or the screen is tilted, adjust the focus at the center of the image. The upper and lower edge might be out of focus.
When the image is distorted in keystone, adjust the KEYSTONE in POSITION menu.
Settings
ENGLISH - 37