Maintenance
Troubleshooting
Should any problem persist, contact your dealer.
Problem | Cause | Reference | |
page | |||
|
| ||
|
|
| |
| The power cord may not be connected. | 19 | |
| The MAIN POWER switch is turned off. | 20 | |
Power does not turn on. | No electric supply is at the wall outlet. | 19 | |
TEMP indicator is lit or flashes. | 40 | ||
| |||
| LAMP indicator is lit or flashes. | 40 | |
| The lamp unit cover has not been securely installed. | 42 | |
| The video signal input source may not be connected to a | 18 | |
| terminal properly. | ||
No picture appears. | The input selection setting may not be correct. | 21 | |
The BRIGHTNESS adjustment setting may be at the | 31 | ||
| |||
| minimum setting. | 46 | |
| The SHUTTER function may be in use. | ||
| The lens cover may still be attached to the lens. | 12 | |
| The lens focus may not have been set correctly. | 16 | |
The picture is fuzzy. | The projector may not be at the correct distance from the | 14 | |
screen. |
| ||
| 41 | ||
| The lens may be dirty. | ||
| The projector may be tilted too much. | 15 | |
|
|
| |
| COLOR or TINT adjustment may be incorrect. | 31 | |
The color is pale or greyish. | The input source which is connected to the projector may not | ||
21 | |||
| be adjusted correctly. | ||
|
| ||
|
|
| |
| The batteries may be weak. |
| |
The Remote control does | The batteries may not have been inserted correctly. | 11 | |
The remote control signal receptor on the projector may be | |||
not operate. | 22 | ||
obstructed. | |||
|
| ||
| The remote control unit may be out of the operation range. |
| |
|
|
| |
| The signal format | 33 | |
| correctly. | ||
The picture does not | - | ||
There may be a problem with the VCR or other signal source. | |||
display correctly. |
| ||
A signal which is not compatible with the projector is being | 45 | ||
| |||
| input. | ||
|
| ||
|
|
| |
| The cable may be too long. | - | |
| The external video output from a laptop computer may not be | - | |
Picture from a computer | correct. |
| |
(You may be able to change the external output settings by |
| ||
does not appear. | pressing the [Fn] + [F3] or [Fn] + [F10] keys simultaneously. |
| |
| The actual method varies depending on the type of computer; |
| |
| refer to the documentation provided with your computer for |
| |
| further details.) |
|
44 - ENGLISH