Panasonic PT-AE1000U manual Loading saved profiles, Managing stored logs

Page 27

Managing stored logs

You can edit or delete the stored logs of the selected PICTURE MODE.

1.Select LOG and press ENTER.

The LOG menu is displayed.

PICTURE MODE : CINEMA1

POINT1

POINT2

POINT3

POINT4

POINT5

POINT6

POINT7

POINT8

ALL DELETE

Sampled color Adjusted color

2.Select the required log from 1 - 8 or ALL DELETE, and press ENTER.

Select CHANGE to edit the log.

The cursor menu is displayed and you can readjust the color.

Select DELETE to delete the log.

The confirmation screen will be displayed. Select OK to delete.

When you select ALL DELETE, the "DELETE ALL LOG." screen is displayed. Select OK to delete all logs. The PROFILE setting will be set to NORMAL.

Saving a log setting as a profile

Return to the COLOR MANAGEMENT menu and save the stored log as a profile. Make sure that the PICTURE MODE is not switched.

1.Select the PROFILE SAVE menu and press

ENTER

The PROFILE SAVE menu is displayed. You can save the profile as USER1, USER2 and USER3.

USER1

USER2

USER3

2. Press ENTER to save the profile

The confirmation screen is displayed. Press ENTER again to save.

Remote control operation

Loading saved profiles

When profiles are loaded under the PICTURE MODE setting, you can keep them as you defined until the PROFILE is set to NORMAL.

1.Select the required PICTURE MODE and press ENTER.

2.Press the COLOR MANAGEMENT button and select the PROFILE menu.

The profile settings of the selected PICTURE MODE will be displayed.

3.Select the required profile and press ENTER.

	NORMAL	Return to the default setting of the
	NORMAL	PICTURE MODE
		PICTURE MODE
	USER1
	USER2	Defined profile settings.
	USER3

NOTE:

LOG and PROFILE SAVE are not displayed before you apply COLOR MANAGEMENT.

If you load a profile with a different attribute mode of the profile, the CURSOR and PROFILE SAVE menus will not be displayed.

The approximate colors will be adjusted at the same time. If you adjust the exact same color differently, both colors will affect each other and you might get unexpected results.

White, Black and Grey are not adjustable.

If you escape the COLOR MANAGEMENT menu or attempt to perform another menu action before you save the adjusted profile, the confirmation screen will be displayed.

If you switch the input signal before you save the profile, the setting will be cancelled without notice.

Basic Operation

ENGLISH - 27

Image 27

Contents Operating Instructions PT-AE1000U Important Safety NoticePanasonic Important Safety NoticeContents Settings MaintenanceAppendix Precautions with regard to safety Use only the specified batteries Do not look into the lens while the projector is being usedAlways disconnect all cables before moving the projector Do not place any heavy objects on top of the projectorDo not mix old and new batteries Do not put your weight on this projectorAccessories Remote controlBefore use Lamp Order to get the best picture qualityDo not touch the surfaces of the lens with your bare hands ScreenRemote control About Your ProjectorFront, back and top view Top and front view ProjectorBack and bottom view SerialHdmi Component 2 Setting up Calculation methods for screen dimensionsScreen size and throw distance Projection method Front leg adjuster and throwing angleVertical shift Adjusting the Lens shift dialsLens shift and positioning Horizontal shiftAdjustable projection range Projector location rangeAfter fixing the screen position Before connection to the projector Connecting with COMPONENT/VIDEO/S-VIDEOConnecting with HDMI/PC ConnectionsConnecting Switching the projector on/offPower cord Power indicatorSwitching on the projector Switching off the projectorPower indicator Selecting the input signal Projecting an imagePositioning the image Turning on the button backlight Remote control operationResetting to the factory default settings Operating rangeSwitching the aspect ratio Switching the input signalAdjusting in Advanced menu Adjusting the waveform of the input signalAdjusting the waveform Adjusting in Picture menuSwitching off the projector automatically Adjusting the focus and zoomSwitching the picture mode Adjusting the imageColor Setting your own color profileAdjusting the selected color Create a new profileSaving a log setting as a profile Loading saved profilesManaging stored logs Displaying the Main menu Operating procedureMenu Navigation Navigating through the Menu169*5 Sub-menu items Default settingSee Position Menu on Sub-menu items Default setting Main menu and Sub-menuLanguage Picture Menu NR Noise Reduction Dynamic IrisWaveform Monitor Advanced MenuSecam Ntsc Signal ModeMemory Save Memory LoadPosition Clock PhasePosition Menu DOT ClockComponent signals AspectAspect ratio options and projection example Over Scan Auto SetupAspect ratio depend on signals WSSZOOM/FOCUS Lens Control MenuOption Menu Altitude InstallationLamp Power SleepControlling alerts Temp and Lamp IndicatorsLamp indicator Temp indicator Lamp indicatorCare and Replacement Before cleaningCleaning your projector Opening the top cover When to replace the Lamp unitBefore replacing the Lamp unit Replacing the lamp unitLamp unit fixing screws Lamp unit lock Press here Resetting the Lamp RuntimeRemoving and replacing the lamp unit Attaching the top coverTroubleshooting Display Scanning Dot clock Frequency Picture List of compatible signalsResolution Frequency Quality*2 Format Dots*1 MHz KHz Technical InformationConnection Sub 9 pin male Pin assignments and signal namesCommunication settings Serial terminalControl commands Projector Inquiry commandsCable specifications Basic formatLens Control Menu 37 H Menu structurePicture Menu 31 H Position Menu 34 HNTSC/NTSC 4.43/PAL/PAL-M/PAL-N/SECAM SpecificationsHDMI1 IN/HDMI2 Dimensions Trademark acknowledgements DOT Clock Dynamic Iris IndexIndex