Panasonic PT-AE1000U Serial terminal, Connection Sub 9 pin male, Pin assignments and signal names

Page 46

Technical Information

Serial terminal

The serial connector which is on the connector panel of the projector conforms to the RS-232C interface specification, so that the projector can be controlled by a personal computer which is connected to this connecter.

Connection

D-sub 9 pin (male)

PC	Serial terminal
	(male)

NOTE:

You must use only an RS-232C Serial Interface Cable with a ferrite core, type ET-ADSER.

Pin assignments and signal names

Pin No.	Signal name	Contents

A		NC

B	TXD	Transmitted data

C	RXD	Received data

D		NC

E	GND	Earth
E	GND	Earth

F		NC

G	RTS	Connected internally

H	CTS
H	CTS

I		NC

Communication settings

Signal level	RS-232C	Character length	8 bits

Sync. method	Asynchronous	Stop bit	1 bit

Baud rate	9 600 bps	X parameter	None

Parity	None	S parameter	None

Appendix

46 - ENGLISH

Image 46

Contents Operating Instructions Important Safety Notice PT-AE1000UImportant Safety Notice PanasonicContents Maintenance SettingsAppendix Precautions with regard to safety Do not place any heavy objects on top of the projector Do not look into the lens while the projector is being usedAlways disconnect all cables before moving the projector Use only the specified batteriesDo not put your weight on this projector Do not mix old and new batteriesRemote control AccessoriesBefore use Screen Order to get the best picture qualityDo not touch the surfaces of the lens with your bare hands LampAbout Your Projector Remote controlFront, back and top view Projector Top and front viewSerial Back and bottom viewHdmi Component 2 Calculation methods for screen dimensions Setting upScreen size and throw distance Front leg adjuster and throwing angle Projection methodHorizontal shift Adjusting the Lens shift dialsLens shift and positioning Vertical shiftProjector location range Adjustable projection rangeAfter fixing the screen position Connections Connecting with COMPONENT/VIDEO/S-VIDEOConnecting with HDMI/PC Before connection to the projectorPower indicator Switching the projector on/offPower cord ConnectingSwitching off the projector Switching on the projectorPower indicator Projecting an image Selecting the input signalPositioning the image Operating range Remote control operationResetting to the factory default settings Turning on the button backlightSwitching the input signal Switching the aspect ratioAdjusting in Picture menu Adjusting the waveform of the input signalAdjusting the waveform Adjusting in Advanced menuAdjusting the image Adjusting the focus and zoomSwitching the picture mode Switching off the projector automaticallyCreate a new profile Setting your own color profileAdjusting the selected color ColorLoading saved profiles Saving a log setting as a profileManaging stored logs Navigating through the Menu Operating procedureMenu Navigation Displaying the Main menuMain menu and Sub-menu Sub-menu items Default settingSee Position Menu on Sub-menu items Default setting 169*5Language Picture Menu Advanced Menu Dynamic IrisWaveform Monitor NR Noise ReductionMemory Load Signal ModeMemory Save Secam NtscDOT Clock Clock PhasePosition Menu PositionAspect Component signalsAspect ratio options and projection example WSS Auto SetupAspect ratio depend on signals Over ScanLens Control Menu ZOOM/FOCUSOption Menu Sleep InstallationLamp Power AltitudeLamp indicator Temp and Lamp IndicatorsLamp indicator Temp indicator Controlling alertsBefore cleaning Care and ReplacementCleaning your projector Replacing the lamp unit When to replace the Lamp unitBefore replacing the Lamp unit Opening the top coverAttaching the top cover Resetting the Lamp RuntimeRemoving and replacing the lamp unit Lamp unit fixing screws Lamp unit lock Press hereTroubleshooting Technical Information List of compatible signalsResolution Frequency Quality*2 Format Dots*1 MHz KHz Display Scanning Dot clock Frequency PictureSerial terminal Pin assignments and signal namesCommunication settings Connection Sub 9 pin maleControl commands Basic format Inquiry commandsCable specifications ProjectorPosition Menu 34 H Menu structurePicture Menu 31 H Lens Control Menu 37 HSpecifications NTSC/NTSC 4.43/PAL/PAL-M/PAL-N/SECAMHDMI1 IN/HDMI2 Dimensions Trademark acknowledgements Index DOT Clock Dynamic IrisIndex