Panasonic PT-AE1000U manual Control commands

				Technical Information
Control commands
Command	Control contents			Remarks
		In standby mode, all commands other than the PON command are
PON	Power ON	ignored.
		The PON command is ignored during lamp ON control.
		If a PON command is received while the cooling fan is operating after
POF	Power OFF	the lamp has switched off, the lamp is not turned back on again straight
		away in order to protect the lamp.
		Parameter: (page 23)		SVD = S-VIDEO IN
IIS	INPUT	VID = VIDEO IN		HD1 = HDMI1 IN
		RG1 = PC IN		HD2 = HDMI2 IN
		CP2 = COMPONENT1 IN		CP2 = COMPONENT2 IN
OMN	MAIN	Displaying Main menu
OEN	ENTER	Activating the selected items in menu mode.
OBK	RETURN	Returning to the previous menu or escaping from the menu mode.
OCU/OCD/	Navigation buttons	OCU = F button		OCL = I button
OCL/OCR		OCD = G button		OCR = H button
OLE	LENS CONTROL	Activating the LENS CONTROL menu.
OST	DEFAULT	Resetting to the factory default setting. (page 22)
		Freezing the projected screen.
OFZ	FREEZE	Parameter:
		0 = OFF		1 = ON
		Setting the duration of time to turn off the power automatically.
OOT	SLEEP	0 = OFF	1 = 60 min.	2 = 90 min. 3 = 120 min. 4 = 150 min.
		5 = 180 min.	6 = 210 min.	7 = 240 min. (page 25)
		Turning off the projection temporarily.
OSH	SHUTTER	Send the command to switch between ON and OFF.
		Do not send the command consecutively.
OVM	PICTURE	Activating the PICTURE menu. Send the command to switch menu items.
		(page 28)
		Activating the WAVEFORM.		(page 24)
		Parameter:
		0 = OFF		5 = SINGLE LINE SCAN (Y)
OWM	WAVEFORM	1 = FULL SCAN (Y)
		2 = FULL SCAN (R)		6 = SINGLE LINE SCAN (R)
		3 = FULL SCAN (G)		7 = SINGLE LINE SCAN (G)
		4 = FULL SCAN (B)		8 = SINGLE LINE SCAN (B)
VS1	ASPECT	Switch the aspect ratio. (page 23)
		Parameter: (page 25)		NOR=NORMAL
		NAT=COLOR1
VPM	PICTURE MODE	DYN=DYNAMIC		CN1=CINEMA1
		CN2=CINEMA2		CN3=CINEMA3
		VID=COLOR2

Appendix

ENGLISH - 47