Panasonic PT-AE2000U manual Switching the projector on/off, Power cord, Power indicator

Page 19

Switching the projector on/off

Power cord

	Connecting		Disconnecting
1.	Make sure the shape of	1.	Make sure the MAIN POWER is switched off and
	the power plug and the		unplug the power cord from the wall outlet.
	AC IN connector on the	2.	Hold the plug and unplug the power cord from the
	back of the projector		AC IN connector on the side of the projector.
	match, then push the plug all the way in.
2.	Connect the power cord to a wall outlet.

NOTE:

•Do not use other than the provided power cord.

•Ensure all the input devices are connected and turned off before connecting the power cord.

•Do not force the connector as this may damage the projector and/or the power cord.

•Dirt or dust build-up around plugs may cause fire or electrical hazards.

•Switch off the power to the projector when not in use.

POWER indicator

POWER indicator

	Indicator status		Status

	No illumination or flashing		The MAIN POWER button is switched off.

	Red	Lit	The MAIN POWER button is switched on and the projector is in standby.

	Green	Flashing	The POWER button is switched on and the projector is getting ready to project.

		Lit	The projector is ready to project.
		Lit	The projector is ready to project.

		Lit	The POWER button is switched off and the projector is cooling the lamp.
	Orange
	Orange	Flashing	The POWER button is switched on again when cooling the lamp and recovering to

			projection mode. Recovery may take a while.
			projection mode. Recovery may take a while.

NOTE:

•While the projector is cooling the lamp, do not switch the MAIN POWER button off or unplug the power cord.

•The electric consumption in standby mode is 0.08 W.

Basic Operation

ENGLISH - 19

Image 19

Contents Operating Instructions Dear Panasonic Customer Important Safety NoticePanasonic Important Safety NoticeDeclaration of Conformity Model Number PT-AE2000U Trade NameContents Lens Control ContentsMenu Navigation Picture menuPrecautions with regard to safety Lamp cover gets very hot, and touching it can cause burns Do not look into the lens while the projector is being usedPrecautions with regard to safety Projector may be subject to electromagnetic interference Accessories About Your Projector Remote controlLCD About Your Projector Projector bodyTop and front view Component About Your Projector Back and bottom viewComputer HdmiProjected image Setting upCalculation methods for screen dimensions Screen size and throw distanceMounting in the ceiling and projecting from front Front leg adjusters and throwing angleSetting up Projection methodVertical shift Adjusting the lens shift dialsLens shift and positioning Horizontal shift100% 40% Setting up Projector location rangeWhen the screen position is fixed When the projector position is fixedConnections Before connecting to the projectorConnecting to Component IN/VIDEO IN/S-VIDEO Connecting to Computer IN/HDMIConnecting Disconnecting Switching the projector on/offPower cord Power indicatorSwitching off the projector Switching on the projectorSwitching the projector on/off Projecting an image Selecting the input signalSwitch on the connected devices Adjust the focus and the projected image sizeTurning on the button backlight Remote control operationResetting to the factory default settings Operating rangeRemote control operation Switching the input signalSwitching the aspect ratio Loading a saved settingBrightness Adjusting the signal condition with a waveformAdjusting with luminance options Displaying the waveformSwitching off the projector automatically Adjusting the focus and zoomSwitching the picture mode Adjusting the imageManaging stored logs Setting your own color profileAdjusting the selected color Create a new profileLoading saved profiles Saving a log setting as a profileDeleting the saved profiles Changing the profile namesMenu Navigation DefaultMain menu and sub-menu Menu Navigation Returning to the previous menu Adjusting with the bar scale itemsNavigating through the Menu Displaying the main menuPicture menu Waveform Monitor Color TemperatureSplit Adjust Dynamic IrisAdvanced Menu Adjusting the image in a split windowNR Noise Reduction Memory Load Memory SaveXvYCC You can edit the named memory settings Signal ModeDeleting a memory setting Changing the name of the memory settingDOT Clock Clock PhasePosition menu PositionFIT Component signalsPosition menu Aspect ratio options and projection example ZoomKeystone Auto SetupWSS Over ScanPress Enter to display the projected image ZOOM/FOCUSBUTTON1/2/3 Blank functionOption menu Altitude InstallationLamp Power SleepTemp indicator Temp and Lamp IndicatorsManaging the indicated problems Lamp indicatorCleaning the projector Care and ReplacementBefore replacing the lamp unit Care and ReplacementWhen to replace the lamp unit Replacing the lamp unitLamp unit fixing screws Lamp unit lock Press here Care and Replacement Removing and replacing the lamp unitResetting the Lamp Runtime Attaching the top coverTroubleshooting Technical Information List of compatible signalsSerial terminal Control commands Technical Information Communication settingsTechnical Information Inquiry commands Installing the safety cable Ceiling mount bracket safeguardsSpecifications Hdmi VideoComputer ComponentUnit mm DimensionsThese Operating Instructions are printed on recycled paper Trademark acknowledgementsIndex Index Panasonic Puerto Rico, Inc Panasonic Projector Systems CompanyTechnical Support Panasonic Canada Inc