Panasonic PT-AE2000U manual Picture menu

PICTURE menu

Remote control Control panel

See “Navigating through the MENU” on page 30. See “Main menu and sub-menu” on page 28.

CONTRAST

You can adjust the contrast of the projected image. Adjust the BRIGHTNESS in advance if necessary.

Lower Higher

Setting range: -64 to +64

PICTURE MODE

Depending on the projection environment, you can use these preset parameter settings to optimize image projection. Press I H to cycle through the options.

NORMAL CINEMA3

DYNAMIC

		CINEMA2
COLOR1
COLOR2		CINEMA1
NORMAL	Setting for a general image, such
	as sports or games
DYNAMIC	Bright and sharp setting
	Setting for HDTV standard in ITU-
COLOR1	R BT. 709 and color temperature
	6 500 K at the default setting of
	the PICTURE menu items.
	Setting for DCDM standard
	(SMPTE431-2) and color
COLOR2	temperature 6 300 K at the
	default setting of the PICTURE
	menu items.
CINEMA1	Hollywood style colors
CINEMA2	Deeper and more rich color
	setting
CINEMA3	Vivid and crisp color setting

NOTE:

•It may take for a while until the selected mode is stabilized.

BRIGHTNESS

You can adjust the brightness of the projected image.

Darker Brighter

Setting range: -32 to +32

COLOR

You can adjust the color saturation of the projected image.

Lighter Darker

Setting range: -32 to +32

When COMPUTER signal is connected, only available

with the following signals.
1 125	(1 080)/60i	1 125	(1 080)/50i
1 125	(1 080)/60p	1 125	(1 080)/50p

TINT

You can adjust the skin tone in the projected image.

More More

reddish greenish

Setting range: -32 to +32

When COMPUTER signal is connected, only available with the following signals.

1 125 (1	080)/60i	1 125	(1	080)/50i
1 125 (1	080)/60p	1 125	(1	080)/50p

Settings

SHARPNESS

You can adjust the sharpness of the projected image.

Less	More
sharp	sharp

Setting range will vary according to the selected input signal.

ENGLISH - 31