Panasonic PT-AE2000U manual Technical Information Communication settings, Control commands

Page 49

Technical Information

Communication settings

Signal level	RS-232C	Character length	8 bits
Sync. method	Asynchronous	Stop bit	1 bit
Baud rate	9 600 bps	X parameter	None
Parity	None	S parameter	None

Control commands

	Command	Control contents			Remarks
	PON	POWER ON	In standby mode, all commands other than the PON command are ignored.
	PON	POWER ON	The PON command is ignored during lamp ON control.
			The PON command is ignored during lamp ON control.
	POF	POWER OFF	If a PON command is received while the cooling fan is operating after the lamp has switched
	POF	POWER OFF	off, the lamp is not turned back on again straight away in order to protect the lamp.

			Parameter:		CP2 = COMPONENT2 IN
	IIS		CP1 = COMPONENT1 IN		CP2 = COMPONENT2 IN
	IIS	INPUT	SVD = S-VIDEO IN		VID = VIDEO IN
			HD1 = HDMI1 IN		HD2 = HDMI2 IN
			HD3 = HDMI3 IN		RG1 = COMPUTER IN
	OMN	MAIN	Displaying the main menu.

	OEN	ENTER	Activating the selected items in the menu mode.

	OBK	RETURN	Returning to the previous menu or escaping from the menu mode.

	OCU/OCD/	Navigation buttons	OCU = F button		OCL = I button
	OCL/OCR	Navigation buttons	OCD = G button		OCR = H button
	OCL/OCR		OCD = G button		OCR = H button

	OLE	LENS	Activating the LENS CONTROL menu.

	OST	DEFAULT	Resetting to the factory default setting. (page 22)

	OFZ		Freezing the projected screen.
	OFZ	FREEZE	Parameter:
			0 = OFF		1 = ON
	OOT		Setting the duration of time to turn off the power automatically. (page 25)
	OOT	SLEEP	0 = OFF	1 = 60min.	2 = 90min.	3 = 120min.	4 = 150min.
			5 = 180min.	6 = 210min.	7 = 240min.
	OSH		Turning off the projection temporarily.
	OSH	BLANK	Send the command to switch between ON and OFF.
			Do not send the command consecutively.
	OVM	PICTURE	Activating the PICTURE menu. Send the command to switch menu items. (page 25)

			Activating the WAVEFORM.		(page 24)
			Parameter:
	OWM		0 = OFF		5 = SINGLE LINE SCAN (Y)
	OWM	WAVEFORM	1 = FULL SCAN (Y)		5 = SINGLE LINE SCAN (Y)
			2 = FULL SCAN (R)		6 = SINGLE LINE SCAN (R)
			3 = FULL SCAN (G)		7 = SINGLE LINE SCAN (G)
			4 = FULL SCAN (B)		8 = SINGLE LINE SCAN (B)
	VS1	ASPECT	Switching the aspect ratio. (page 23)

			Switching the PICTURE MODE. (page 25)
	VPM	PICTURE MODE	Parameter:
	VPM	PICTURE MODE	NOR = NORMAL	DYN = DYNAMIC CL1 = COLOR1		CL2 = COLOR2
			NOR = NORMAL	DYN = DYNAMIC CL1 = COLOR1		CL2 = COLOR2
			CN1 = CINEMA1	CN2 = CINEMA2 CN3 = CINEMA3

Appendix

ENGLISH - 49

Image 49

Contents Operating Instructions Dear Panasonic Customer Important Safety NoticeDeclaration of Conformity Important Safety NoticeModel Number PT-AE2000U Trade Name PanasonicContents Menu Navigation ContentsPicture menu Lens ControlPrecautions with regard to safety Lamp cover gets very hot, and touching it can cause burns Do not look into the lens while the projector is being usedPrecautions with regard to safety Projector may be subject to electromagnetic interference Accessories About Your Projector Remote controlLCD About Your Projector Projector bodyTop and front view Computer About Your Projector Back and bottom viewHdmi ComponentCalculation methods for screen dimensions Setting upScreen size and throw distance Projected imageSetting up Front leg adjusters and throwing angleProjection method Mounting in the ceiling and projecting from frontLens shift and positioning Adjusting the lens shift dialsHorizontal shift Vertical shiftWhen the screen position is fixed Setting up Projector location rangeWhen the projector position is fixed 100% 40%Connecting to Component IN/VIDEO IN/S-VIDEO Before connecting to the projectorConnecting to Computer IN/HDMI ConnectionsPower cord Switching the projector on/offPower indicator Connecting DisconnectingSwitching off the projector Switching on the projectorSwitching the projector on/off Switch on the connected devices Selecting the input signalAdjust the focus and the projected image size Projecting an imageResetting to the factory default settings Remote control operationOperating range Turning on the button backlightSwitching the aspect ratio Switching the input signalLoading a saved setting Remote control operationAdjusting with luminance options Adjusting the signal condition with a waveformDisplaying the waveform BrightnessSwitching the picture mode Adjusting the focus and zoomAdjusting the image Switching off the projector automaticallyAdjusting the selected color Setting your own color profileCreate a new profile Managing stored logsDeleting the saved profiles Saving a log setting as a profileChanging the profile names Loading saved profilesMenu Navigation DefaultMain menu and sub-menu Menu Navigation Navigating through the Menu Adjusting with the bar scale itemsDisplaying the main menu Returning to the previous menuPicture menu Split Adjust Color TemperatureDynamic Iris Waveform MonitorAdvanced Menu Adjusting the image in a split windowNR Noise Reduction Memory Load Memory SaveXvYCC Deleting a memory setting Signal ModeChanging the name of the memory setting You can edit the named memory settingsPosition menu Clock PhasePosition DOT ClockPosition menu Aspect ratio options and projection example Component signalsZoom FITWSS Auto SetupOver Scan KeystoneBUTTON1/2/3 ZOOM/FOCUSBlank function Press Enter to display the projected imageOption menu Lamp Power InstallationSleep AltitudeManaging the indicated problems Temp and Lamp IndicatorsLamp indicator Temp indicatorCleaning the projector Care and ReplacementWhen to replace the lamp unit Care and ReplacementReplacing the lamp unit Before replacing the lamp unitResetting the Lamp Runtime Care and Replacement Removing and replacing the lamp unitAttaching the top cover Lamp unit fixing screws Lamp unit lock Press hereTroubleshooting Technical Information List of compatible signalsSerial terminal Control commands Technical Information Communication settingsTechnical Information Inquiry commands Installing the safety cable Ceiling mount bracket safeguardsSpecifications Computer VideoComponent HdmiUnit mm DimensionsThese Operating Instructions are printed on recycled paper Trademark acknowledgementsIndex Index Technical Support Panasonic Projector Systems CompanyPanasonic Canada Inc Panasonic Puerto Rico, Inc