Panasonic PT-AX200E Replacing the lamp unit, Care and Replacement, Before replacing the lamp unit

Page 42

Care and Replacement

Replacing the lamp unit

Before replacing the lamp unit

Switch off the MAIN POWER button in proper way and disconnect the mains plug from the mains socket. Make sure the lamp unit and the surroundings are cooled enough.

Unplug all the cables from the projector. Prepare a Phillips-head screwdriver.

Contact an Authorised Service Centre to purchase a replacement lamp unit (ET-LAX100).

When the projector is mounted in the ceiling, do not work directly under the projector or put your face closer to the projector.

NOTE:

Prior to replacing the lamp unit, allow it to cool down to prevent the risk of burns, damage and other hazards.

Do not attempt replacement with an unauthorised lamp unit.

When to replace the lamp unit

The lamp unit is consumable and the brightness decreases by duration of usage. The LAMP indicator will inform you of the replacement timing at 1 800 hours, and at 2 000 hours, the projector will be turned off. Those figures are rough guidance and might be shortened by the usage conditions, characteristics of the lamp unit, environmental conditions, and so on. You can check the duration of usage time using LAMP RUNTIME in the OPTION menu.

On screen

LAMP indicator

Indication

REPLACE LAMP

 

 

 

 

 

 

 

REPLACE LAMP” is displayed on the upper left

 

Over 1 800 hours

of the screen for 30 seconds.

 

To clear the screen immediately, press any

 

 

 

 

button.

Illuminates red.

 

REPLACE LAMP” is displayed on the upper left

 

Over 2 000 hours of the screen, and it will stay until you respond.

 

 

To clear the screen, press any button.

 

NOTE:

The guide times, 1 800 and 2 000 hours, are rough estimates based on certain conditions and is not a guaranteed time. The estimated condition is: LAMP POWER in OPTION menu set to NORMAL.

To prolong the lamp life, set the LAMP POWER in OPTION menu to ECO-MODE. See “LAMP POWER” on page 39.

For more information about the lamp unit, such as guaranteed time, see the instructions which is provided with the lamp unit.

Maintenance

42 - ENGLISH

Image 42
Contents Operating Instructions This Apparatus Must be Earthed Important Safety NoticeFor business users in the European Union To rain or moistureImportant Safety Notice Important the Moulded Plug U.K. onlyContents Picture menu ContentsMenu Navigation Position menuPrecautions with regard to safety Do not look into the lens while the projector is being used Precautions with regard to safetyDo not set up the projector outdoors Use only the specified batteriesDo not mix old and new batteries Remove the used batteries from the remote control promptlyDo not put your weight on this projector Electric shocks can result if this is not doneLiquid crystal panel Order to get the best picture qualityDo not touch the surfaces of the lens with your bare hands ScreenAccessories Mains lead for UKRemote control About Your ProjectorProjector body About Your ProjectorTop and front view About Your Projector Back and bottom view Screen size and throw distance Setting upCalculation methods for screen dimensions Projected imageProjection method Front leg adjusters and throwing angleSetting up Mounting in the ceiling and projecting from frontHorizontal shift Adjusting the lens shift leverLens shift and positioning Vertical shiftWhen the projector position is fixed Setting up Projector location rangeWhen the screen position is fixed 63%Connecting to Computer IN/HDMI Before connecting to the projectorConnecting to Component IN/VIDEO IN/S-VIDEO ConnectionsConnecting Switching the projector on/offPower indicator Mains leadSwitching on the projector Switching off the projectorSwitching the projector on/off Adjust the focus and the projected image size Selecting the input signalSwitch on the connected devices Projecting an imageOperating range Remote control operationSwitching the preset settings Turning on the button backlightResetting to the factory default settings Adjusting the imageSwitching the aspect ratio Remote control operationManaging stored logs Setting your own colour profileAdjusting the selected colour BrightnessLoading saved profiles Saving a log setting as a profileChanging the profile names Deleting the saved profilesSwitching the input signal Assigning the functions for shortcutComponent Video Computer Hdmi 1 Hdmi 2 Menu Navigation Navigating through the MenuDisplaying the main menu Default Main menu and sub-menuMenu Navigation DOT Clock *1 Clock Phase *2Position AspectPicture menu Light Harmonizer Colour TemperatureDynamic Iris Advanced MenuFavourite Save Favourite LoadChanging the name of the memory setting Signal ModeDeleting a memory setting You can edit the named memory settingsPosition Clock PhasePosition menu DOT ClockPosition menu Aspect ratio options and projection example Component signalsComputer signals ScrollOver Scan Auto SetupWSS KeystoneRemote control Function ButtonBlank function Option menu Lamp Runtime Lamp PowerSleep Test PatternLamp indicator Temp and Lamp IndicatorsManaging the indicated problems Temp indicatorCare and Replacement Cleaning the projectorReplacing the lamp unit Care and ReplacementWhen to replace the lamp unit Before replacing the lamp unitCare and Replacement Removing and replacing the lamp unit Resetting the Lamp RuntimeSelect Lamp Runtime Troubleshooting List of compatible signals Technical InformationSerial terminal Technical Information Communication settings Control commandsInquiry Commands Specifications Component VideoComputer HdmiCeiling mount bracket safeguards Installing the safety cableDimensions Trademark acknowledgementsUnit mm Index Index Accessory ConnectingAccessory Screen size Calculation methods Security lock Main menu Navigation Sub-menuS0807-0A
Related manuals
Manual 54 pages 35.04 Kb