Panasonic PT-AX200E manual Technical Information Communication settings, Control commands

Page 47

Technical Information

Communication settings

Signal level	RS-232C	Character length	8 bits
Sync. method	Asynchronous	Stop bit	1 bit
Baud rate	9 600 bps	X parameter	None
Parity	None	S parameter	None

Control commands

	Command	Control contents			Remarks
	PON	POWER ON	In standby mode, all commands other than the PON command are ignored.
	PON	POWER ON	The PON command is ignored during lamp ON control.
			The PON command is ignored during lamp ON control.
	POF	POWER OFF	If a PON command is received while the cooling fan is operating after the lamp has switched
	POF	POWER OFF	off, the lamp is not turned back on again straight away in order to protect the lamp.

			Parameter:		VID = VIDEO IN
	IIS	INPUT	YUV = COMPONENT IN (YPBPR)		VID = VIDEO IN
	IIS	INPUT	SVD = S-VIDEO IN		HD2 = HDMI2 IN
			SVD = S-VIDEO IN		HD2 = HDMI2 IN
			HD1 = HDMI1 IN		RG1 = COMPUTER IN
	OMN	MAIN	Displaying the main menu.

	OEN	ENTER	Activating the selected items in the menu mode.

	OBK	RETURN	Returning to the previous menu or escaping from the menu mode.

	OCU/OCD/	Navigation buttons	OCU = F button		OCL = I button
	OCL/OCR	Navigation buttons	OCD = G button		OCR = H button
	OCL/OCR		OCD = G button		OCR = H button

	OST	DEFAULT	Resetting to the factory default setting. (page 23)

	OFZ		Freezing the projected screen.
	OFZ	FREEZE	Parameter:
			0 = OFF		1 = ON
	OOT		Setting the duration of time to turn off the power automatically. (page 39)
	OOT	SLEEP	0 = OFF	1 = 60min.	2 = 90min.	3 = 120min.	4 = 150min.
			5 = 180min.	6 = 210min.	7 = 240min.
	OSH		Turning off the projection temporarily.
	OSH	BLANK	Send the command to switch between ON and OFF.
			Do not send the command consecutively.
	OVM	PICTURE	Activating the PICTURE menu. Send the command to switch menu items. (page 23)

	VS1	ASPECT	Switching the aspect ratio. (page 23)

			Switching the PICTURE MODE. (page 30)
	VPM	PICTURE MODE	Parameter:
	VPM	PICTURE MODE	NOR = NORMAL	DYN = DYNAMIC VCN = VIVID CINEMA
			NOR = NORMAL	DYN = DYNAMIC VCN = VIVID CINEMA
			CN1 = CINEMA1	CN2 = CINEMA2 NAT = NATURAL		GAM = GAME
	Inquiry	commands

Command	Control contents				Parameter
QPW	Power status	000 = OFF			001 = ON

QFZ	FREEZE status	0	= OFF		1 = ON

QIN		YUV = COMPONENT IN (YPBPR)			VID = VIDEO IN
QIN	INPUT signal status	SVD = S-VIDEO IN			HD2 = HDMI2 IN
		HD1 = HDMI1 IN			RG1 = COMPUTER IN
QOT	SLEEP status	0	= OFF	1 = 60min.	2 = 90min.	3 = 120min.	4 = 150min.
QOT	SLEEP status	5	= 180min.	6 = 210min.	7 = 240min.
		5	= 180min.	6 = 210min.	7 = 240min.
QPM	PICTURE MODE status	NOR = NORMAL		DYN = DYNAMIC VCN = VIVID CINEMA					Appendix
QPM	PICTURE MODE status	CN1 = CINEMA1		CN2 = CINEMA2 NAT = NATURAL		GAM = GAME


QSH	BLANK status	0	= OFF

ENGLISH - 47

Image 47

Contents Operating Instructions To rain or moisture Important Safety NoticeFor business users in the European Union This Apparatus Must be EarthedImportant the Moulded Plug U.K. only Important Safety NoticeContents Position menu ContentsMenu Navigation Picture menuPrecautions with regard to safety Use only the specified batteries Precautions with regard to safetyDo not set up the projector outdoors Do not look into the lens while the projector is being usedElectric shocks can result if this is not done Remove the used batteries from the remote control promptlyDo not put your weight on this projector Do not mix old and new batteriesScreen Order to get the best picture qualityDo not touch the surfaces of the lens with your bare hands Liquid crystal panelMains lead for UK AccessoriesAbout Your Projector Remote controlTop and front view Projector bodyAbout Your Projector About Your Projector Back and bottom view Projected image Setting upCalculation methods for screen dimensions Screen size and throw distanceMounting in the ceiling and projecting from front Front leg adjusters and throwing angleSetting up Projection methodVertical shift Adjusting the lens shift leverLens shift and positioning Horizontal shift63% Setting up Projector location rangeWhen the screen position is fixed When the projector position is fixedConnections Before connecting to the projectorConnecting to Component IN/VIDEO IN/S-VIDEO Connecting to Computer IN/HDMIMains lead Switching the projector on/offPower indicator ConnectingSwitching the projector on/off Switching on the projectorSwitching off the projector Projecting an image Selecting the input signalSwitch on the connected devices Adjust the focus and the projected image sizeTurning on the button backlight Remote control operationSwitching the preset settings Operating rangeRemote control operation Adjusting the imageSwitching the aspect ratio Resetting to the factory default settingsBrightness Setting your own colour profileAdjusting the selected colour Managing stored logsDeleting the saved profiles Saving a log setting as a profileChanging the profile names Loading saved profilesComponent Video Computer Hdmi 1 Hdmi 2 Switching the input signalAssigning the functions for shortcut Displaying the main menu Menu NavigationNavigating through the Menu Menu Navigation DefaultMain menu and sub-menu Aspect Clock Phase *2Position DOT Clock *1Picture menu Advanced Menu Colour TemperatureDynamic Iris Light HarmonizerFavourite Load Favourite SaveYou can edit the named memory settings Signal ModeDeleting a memory setting Changing the name of the memory settingDOT Clock Clock PhasePosition menu PositionScroll Component signalsComputer signals Position menu Aspect ratio options and projection exampleKeystone Auto SetupWSS Over ScanBlank function Remote controlFunction Button Option menu Test Pattern Lamp PowerSleep Lamp RuntimeTemp indicator Temp and Lamp IndicatorsManaging the indicated problems Lamp indicatorCleaning the projector Care and ReplacementBefore replacing the lamp unit Care and ReplacementWhen to replace the lamp unit Replacing the lamp unitSelect Lamp Runtime Care and Replacement Removing and replacing the lamp unitResetting the Lamp Runtime Troubleshooting Technical Information List of compatible signalsSerial terminal Inquiry Commands Technical Information Communication settingsControl commands Specifications Hdmi VideoComputer ComponentInstalling the safety cable Ceiling mount bracket safeguardsUnit mm DimensionsTrademark acknowledgements Index Main menu Navigation Sub-menu Accessory ConnectingAccessory Screen size Calculation methods Security lock IndexS0807-0A

Related manuals

Manual 54 pages 35.04 Kb