Panasonic PT-AX200E Lens shift and positioning, Adjusting the lens shift lever, Horizontal shift

Page 16

Getting

Setting up

Lens shift and positioning

If the projector is not positioned right in front of the centre of the screen, you can adjust the projected image position by moving the lens shift dials within the shift range of the lens.

Adjusting the lens shift lever

1. Screw the shift lever counterclockwise to unlock.

2. Move the shift lever to adjust the projected image position.

3. Screw the shift lever clockwise to lock.

Horizontal shift

You can place the projector where the projector lens is up to 25% horizontally off-centre from the screen and then adjust the image position with the lens shift feature.

Started

Screen

Up to about 25 % of the projection

Up to about 25 % of the projection

Shifting the lever left: Moving to screen’s right

Shifting the lever right: Moving to screen’s left

Vertical shift

You can place the projector where the projector lens is up to 63% vertically off-centre from the screen and the adjust the image position with the lens shift feature.

Up to about 63 % of the projection

Up to about 63 % of the projection

Shifting the lever down: Moving to screen’s bottom.

Shifting the lever up: Moving to screen’s top.

16 - ENGLISH

http://www.pureglare.com.au

Image 16
Contents Operating Instructions Important Safety Notice For business users in the European UnionThis Apparatus Must be Earthed To rain or moistureImportant Safety Notice Important the Moulded Plug U.K. onlyContents Contents Menu NavigationPicture menu Position menuPrecautions with regard to safety Precautions with regard to safety Do not set up the projector outdoorsDo not look into the lens while the projector is being used Use only the specified batteriesRemove the used batteries from the remote control promptly Do not put your weight on this projectorDo not mix old and new batteries Electric shocks can result if this is not doneOrder to get the best picture quality Do not touch the surfaces of the lens with your bare handsLiquid crystal panel ScreenAccessories Mains lead for UKRemote control About Your ProjectorAbout Your Projector Projector bodyTop and front view About Your Projector Back and bottom view Setting up Calculation methods for screen dimensionsScreen size and throw distance Projected imageFront leg adjusters and throwing angle Setting upProjection method Mounting in the ceiling and projecting from frontAdjusting the lens shift lever Lens shift and positioningHorizontal shift Vertical shiftSetting up Projector location range When the screen position is fixedWhen the projector position is fixed 63% 25%Before connecting to the projector Connecting to Component IN/VIDEO IN/S-VIDEOConnecting to Computer IN/HDMI ConnectionsSwitching the projector on/off Power indicatorConnecting Mains leadSwitching off the projector Switching on the projectorSwitching the projector on/off Selecting the input signal Switch on the connected devicesAdjust the focus and the projected image size Projecting an imageRemote control operation Switching the preset settingsOperating range Turning on the button backlightAdjusting the image Switching the aspect ratioResetting to the factory default settings Remote control operationSetting your own colour profile Adjusting the selected colourManaging stored logs BrightnessSaving a log setting as a profile Changing the profile namesLoading saved profiles Deleting the saved profilesAssigning the functions for shortcut Switching the input signalComponent Video Computer Hdmi 1 Hdmi 2 Navigating through the Menu Menu NavigationDisplaying the main menu Main menu and sub-menu DefaultMenu Navigation Clock Phase *2 PositionDOT Clock *1 AspectPicture menu Colour Temperature Dynamic IrisLight Harmonizer Advanced MenuFavourite Save Favourite LoadSignal Mode Deleting a memory settingChanging the name of the memory setting You can edit the named memory settingsClock Phase Position menuPosition DOT ClockComponent signals Computer signalsPosition menu Aspect ratio options and projection example ScrollAuto Setup WSSOver Scan KeystoneFunction Button Remote controlBlank function Option menu Lamp Power SleepLamp Runtime Test PatternTemp and Lamp Indicators Managing the indicated problemsLamp indicator Temp indicatorCare and Replacement Cleaning the projectorCare and Replacement When to replace the lamp unitReplacing the lamp unit Before replacing the lamp unitResetting the Lamp Runtime Care and Replacement Removing and replacing the lamp unitSelect Lamp Runtime Troubleshooting List of compatible signals Technical InformationSerial terminal Control commands Technical Information Communication settingsInquiry Commands Specifications Video ComputerComponent HdmiCeiling mount bracket safeguards Installing the safety cableTrademark acknowledgements DimensionsUnit mm Index Accessory Connecting Accessory Screen size Calculation methods Security lockIndex Main menu Navigation Sub-menu
Related manuals
Manual 54 pages 37.83 Kb