About Your Projector
Preparation
Projector
Top and front view
Illuminates or flashes to indicate the status of the projector. (page 19)
POWER
Turn the POWER on/off. (page 19)
POWER
Switch to cycle through the INPUT SELECT method
Illuminates or flashes to indicate the status of the lamp unit. (page 36)
LAMP
Illuminates or flashes to indicate the temperature status of the lamp unit. (page 36)
TEMP
Senses the luminance for the LIGHT HARMONIZER feature. (page 29)
LUMINANCE SENSOR
options. (page 22)
INPUT SELECT
Display the menu on screen. Return to the previous menu in menu mode. (page 26)
MENU
Heated air comes out of this opening.
Air exhaust port
Remote control signal receptor
Receive a signal from the Remote control. (page 22)
Navigate through the menu with F G H I, ENTER and RETURN. (page 26)
Navigation buttons
Control panel
Turn the outer ring to adjust the focus of the image. (page 21)
Focus ring
Turn the inner ring to adjust the image size. (page 21)
Zoom ring
Intake fresh air to control the temperature inside.
Air intake port
Adjust the position of the projected image.
Shift lever
2.0 power zoom lens.
Projection lens
Protects the Projection lens from dust or dirt.
Lens cover
NOTE:
Do not cover the ventilation openings or place anything within 10 cm (4") of them as this may cause damage or injury.
While the projector is not in use, attach the Lens cover to protect the lens.
12 - ENGLISH