Loading saved profiles, Managing stored logs

		Adjust the vividness of the color.
	COLOR	Setting range: -30 to +30
		Default: 0
		Adjust the color tone.
	TINT	Setting range: -30 to +30
		Default: 0
	BRIGHTNES	Adjust the brightness of the color.
	BRIGHTNES	Setting range: -20 to +20
	S	Setting range: -20 to +20
	S	Default: 0
		Default: 0

4. Press ENTER to store the adjusted result.

“PROCESSING” is displayed for a few seconds and the result is stored in LOG.

You can store up to 8 logs under LOG for each PICTURE MODE setting.

5.Press MENU or RETURN to return to the previous menu.

Repeat the steps above to store more adjustment.

Managing stored logs

You can edit or delete the stored logs of the selected PICTURE MODE.

1.Select LOG and press ENTER.

The LOG menu is displayed.

PICTURE MODE : CINEMA1

POINT1

POINT2

POINT3

POINT4

POINT5

POINT6

POINT7

POINT8

ALL DELETE

Sampled color Adjusted color

2.Select the required log from 1 - 8 or ALL DELETE, and press ENTER.

Select CHANGE to edit the log.

The cursor menu is displayed and you can readjust the color.

Select DELETE to delete the log.

The confirmation screen will be displayed. Select OK to delete.

When you select ALL DELETE, the "DELETE ALL LOG." screen is displayed. Select OK to delete all logs. The PROFILE setting will be set to NORMAL.

Saving a log setting as a profile

Return to the COLOR MANAGEMENT menu and save the stored log as a profile. Make sure that the PICTURE MODE is not switched.

Remote control operation

1.Select the PROFILE SAVE menu and press

ENTER

The PROFILE SAVE menu is displayed. You can save the profile as USER1, USER2 and USER3.

USER1

USER2

USER3

2. Press ENTER to save the profile

The confirmation screen is displayed. Press ENTER again to save.

Loading saved profiles

When profiles are loaded under the PICTURE MODE setting, you can keep them as you defined until the PROFILE is set to NORMAL.

1.Select the required PICTURE MODE and press ENTER.

2.Press the COLOR MANAGEMENT button and select the PROFILE menu.

The profile settings of the selected PICTURE MODE will be displayed.

3.Select the required profile and press ENTER.

	NORMAL	Return to the default setting of the
	NORMAL	PICTURE MODE
		PICTURE MODE
	USER1
	USER2	Defined profile settings.
	USER3

NOTE:

LOG and PROFILE SAVE are not displayed before you apply COLOR MANAGEMENT.

If you load a profile with a different attribute mode of the profile, the CURSOR and PROFILE SAVE menus will not be displayed.

The approximate colors will be adjusted at the same time. If you adjust the exact same color differently, both colors will affect each other and you might get unexpected results.

White, Black and Grey are not adjustable.

If you escape the COLOR MANAGEMENT menu or attempt to perform another menu action before you save the adjusted profile, the confirmation screen will be displayed.

If you switch the input signal before you save the profile, the setting will be cancelled without notice.

Basic Operation

ENGLISH - 25