Panasonic PT-D7500U manual Adjusting the color temperature, Adjusting the picture

Adjusting the picture

Adjusting the color temperature

Adjustment procedure (to be performed while projecting the signals to be adjusted)

MAIN MENU

PICTURE

POSITION

LANGUAGE

OPTION

TEST PATTERN

RESISTERED SIGNAL LIST

PICTURE

	PICTURE MODE	STANDARD
	COLOR	50
	TINT	30
	COLOR TEMP.	STANDARD
	GAMMA	STANDARD
	CONTRAST	32
	BRIGHT	32
	SHARPNESS	6
	NOISE REDUCTION	2
	AI CONTROL	OFF
	:MENU SELECT
	:CHANGE
WHITE BALANCE
	WHITE BALANCE HIGH
	WHITE BALANCE LOW

	:MENU SELECT
ENTER:SUB MENU
WHITE BALANCE HIGH
	R	255
	G	255
	B	255

:MENU SELECT :ADJUST

Press the “MENU” button.

The MAIN MENU screen will be displayed

Select “PICTURE” with the buttons.

Press the “ENTER” button.

The PICTURE screen will be displayed.

Select “COLOR TEMP.” with the buttons.

Select the desired setting from below

with the buttons.

“LOW”, “MIDDLE”, “HIGH”, “DYNAMIC” and

“USER”, “STANDARD”, “NATURAL”, “CINEMA”, “GRAPHIC”

<To further adjust toward the desired white balance>

Select “USER” in Step .

Press the “ENTER” button.

Select “WHITE BALANCE HIGH” or “WHITE BALANCE LOW” with the buttons.

Press “ENTER” button.

The WHITE BALANCE HIGH (LOW) screen will be displayed.

Select “R”, “G” or “B” with the buttons.

Adjust the level with the buttons.

Item	Operation		Adjustment	Remarks
R (Red)	Press	button	Deepens red.
	Press	button	Weakens red.
G (Green)	Press	button	Deepens green.	Maximum value 255
	Press	button	Weakens green.	Minimum value 0
B (Blue)	Press	button	Deepens blue.
	Press	button	Weakens blue.

Note • All colors will not be displayed properly unless adequate adjustment is made.

If the adjustment is not successful, press “STD” (standard) button when the individual adjustment screen is displayed to restore the factory default setting only for the displayed item.

•The color temperature cannot be adjusted for the internal test pattern (refer to page 81). Be sure to project the input signal when adjusting the color temperature.

•If the color matching is set to “USER”, the color temperature will be fixed to “USER”.

52