Panasonic PT-D7500U manual Sharpness / Gamma / Noise reduction / Pulldown mode

Adjusting the picture

Sharpness / Gamma / Noise reduction / Pulldown mode

Procedure of adjustment

MAIN MENU

PICTURE

POSITION

LANGUAGE

OPTION

TEST PATTERN

RESISTERED SIGNAL LIST

Press the “MENU” button.

The MAIN MENU screen will be displayed.

Select “PICTURE” with the buttons.

:MENU SELECT ENTER:SUB MENU

PICTURE

PICTURE MODE	STANDARD
COLOR	50
TINT	30
COLOR TEMP.	STANDARD
GAMMA	STANDARD
CONTRAST	32
BRIGHT	32
SHARPNESS	6
NOISE REDUCTION	2
AI CONTROL	OFF

:MENU SELECT :ADJUST

Press the “ENTER” button.

The PICTURE screen will be displayed.

Select desired one of the items in the

following table with the buttons.

Note • When and buttons are displayed above or under the items in the “PICTURE” or “OPTION” screen, they indicate that there are more adjustment (items).

		Switch the setting with the
		buttons.
		Refer to the following table for the items and the
		details.
Adjustment items	Operation			Adjustment
				0 to 7 for the RGB system and the HD system
Sharpness	Sharpens the outline of the image.			(factory setting is 2) 0 to 15 for the SD system
				(factory setting is 6)
				10 types including: Standard 1, 2, Cinema, User 1,
Gamma selection	Switches the gamma modes			User 2, 2.2, 2.5, Natural, Graphic 1, Graphic 2
				(Factory setting is Graphic 1 for the RGB system
				and Standard 1 for the SD and HD systems)
			Four types: OFF (no correction), 1 (low),
Noise reduction	Switches the noise reduction effect mode.
			2 (middle), 3 (high) (factory default: 2)
				OFF: Unforced cinema processing
	Increase the vertical resolution when the
				AUTO: Performs automatic detection and
Pulldown mode	PAL (or SECAM) 576i signal input or the
				cinema processing. (factory default)
	NTSC 480i signal input is applied.
				2:2 FORCED-ON: Forced cinema processing

Note • Noise reduction cannot be adjusted with analog RGB input, DVI input or network input.

•In pull-down mode, the image quality will be deteriorated (lowered vertical resolution) if “2:2 Forced On” is selected for setting of others than a signal that has been pulled-down by 2:2.

54