Panasonic PT-D7500U manual Adjusting the clamp position, Clamp Position screen will be displayed

Adjusting the position

Adjusting the clamp position

Use the clamp position adjustment to achieve the optimal value when dark areas of the image are crushed or displayed in green.

Procedure of adjustment

MAIN MENU

PICTURE

POSITION

LANGUAGE

OPTION

TEST PATTERN

RESISTERED SIGNAL LIST

:MENU SELECT

ENTER:SUB MENU

POSITION

	SHIFT
	SIZE	DEFAULT
	BLANKING
	CLOCK PHASE	0
	INPUT RESOLUTION
	CLAMP POSITION
	KEYSTONE
	EDGE BLENDING
	:MENU SELECT
ENTER:SUB MENU
CLAMP POSITION
	POSITION	1

Press the “MENU” button.

The MAIN MENU screen will be displayed.

Select “POSITION” with the buttons.

Press the “ENTER” button.

The POSITION screen will be displayed.

Select “CLAMP POSITION” with the buttons.

Press the “ENTER” button.

The CLAMP POSITION screen will be displayed.

Adjust with the buttons.

The value changes from 1 to 255.

:MENU SELECT :ADJUST

The optimal value for the clamp position adjustment

•If dark areas are crushed: The optimal value is the point where the dark area is best improved.

•If the dark areas are displayed in green: The optimal value is the point where the green area becomes dark and clear.

Note • The clamp position can be adjusted only when the RGB signal input is applied with RGB1, RGB2 IN, and the analog RGB input module (optional: ET-MD95RGB).

62