NETWORK menu (continued)
Network setup
You can make detailed wired LAN settings.
1 | Press ▲▼ to select [Network setup], and press <SELECT> button. |
The detailed [Network setup] screen will be displayed. |
2 Press ▲▼ to select an item, and change the setting according to the instructions. | |||
|
| On: | If a DHCP server exists in the network to which the |
|
|
| projector is connected, the IP address will automatically be |
| DHCP |
| acquired. |
| (DHCP client function) | Off: | If a DHCP server does not exist in the network to which |
|
|
| the projector is connected, additionally set [IP address], |
|
|
| [Subnet mask ] and [Default gateway ]. |
|
|
|
|
| IP address | Enter the IP address if DHCP server is not used. | |
| (Display of IP address and setting) | ||
|
|
| |
|
|
|
|
| Subnet mask | If not using a DHCP server, enter the subnet mask. | |
| (Displaying and setting the subnet mask) | ||
|
|
|
|
| Default gateway | Enter the gateway address if DHCP server is not used. | |
| (Display of gateway address and setting) | ||
|
|
| |
| DNS | Sets IP address of the DNS server. | |
|
|
|
|
“Glossary” (See page 26) |
|
| |
3 | Press ▲▼◄► to select [Set], and press <SELECT> button. |
Save the current network settings. |
Before using the DHCP server, make sure the DHCP server is already functioning.
For details of IP address, subnet mask, gateway and DNS, ask the network administrator.
Default wired LAN settings
The following settings are set before the projector leaves the factory.
DHCP | Off |
IP address | 192.168.10.100 |
Subnet mask | 255.255.255.0 |
Default gateway | 192.168.10.1 |
DNS 1 |
|
DNS 2 |
|
7