Panasonic PT-FW300NTE, PT-FW300E manual Switching the projector on/off, Mains lead, Connecting

Page 23

Switching the projector on/off

Mains lead

Connecting

Disconnecting

1.Make sure the shape of the mains plug and the AC IN terminal on the back of the projector match, then push the plug all the way in.

1.Unplug the mains lead from the mains socket.

2.Depress the latch and slide the cover off.

2.Align the side of the power cord secure lock with the side guide rail of the AC IN terminal of the projector and slide it in.

Rail guide

3.Place the latch to the latch catcher and press until it clicks.

Latch

4. Connect the mains lead to a mains socket.

Latch

3.Slide the power cord secure lock up along the side guide rail and remove.

Rail guide

4.Hold the plug and unplug the mains lead from the AC IN terminal on the back of the projector.

Power indicator lights in orange if the internal cooling fan is still operating by internal power supply.

Basic Operation

NOTE:

•Do not use other than the provided mains lead.

•Ensure all the input devices are connected and turned off before connecting the mains lead.

•Do not force the connector as this may damage the projector and/or the mains lead.

•Dirt or dust build-up around plugs may cause fire or electrical hazards.

•Switch off the power to the projector when not in use.

•If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take a while to start the projection.

Direct power on function

You can start the projection with only supplying the electric power. See “INITIAL START UP” on page 43.

Direct power off function

You can switch off the electric power supply any time by unplugging the mains plug from the mains socket or by switching off the main power. The internal lamp cooling fan keeps operating by the internal power supply, and stops automatically when cooled enough.

ENGLISH - 23

Image 23

Contents PT-FW300E To rain or moisture Important Safety NoticeThis Apparatus Must be Earthed For business users in the European Union Important Safety NoticeDeclaration of Conformity DoC Declaration of ConformityEnglish Contents Appendix SettingsMaintenance ContentsPrecautions with regard to safety Do not look into the lens while the projector is being used Precautions with regard to safetyDo not set up the projector outdoors Do not mix old and new batteries Remove the used batteries from the remote control promptlyDo not put your weight on this projector Use only the specified batteriesOptical components SecurityOrder to get the best picture quality Liquid crystal panelMains lead AccessoriesPower cord secure lock Read this first Minimum required setting screenControl panel About Your ProjectorProjector body Top and front viewLamp unit compartment Air exhaust port Auto cleaning filter ACF Front leg Adjusters CompartmentAbout Your Projector Back and bottom view Security lockBattery compartment Remote controlAttaching a hand strap Top view Remote control indicator CLOCK, Clock Phase and Signal Search forProjection size 16 Throw distance L Setting upScreen size and throw distance Calculation methodsMounting on the ceiling and projecting from front Front leg adjusters and throwing angleSetting up Projection methodVertical shift Adjusting the lens shift leverLens shift and positioning Horizontal shiftWhen the projector position is fixed Setting up Projector location rangeWhen the screen position is fixed LAN terminal Connecting example ComputersConnections Before connection to the projectorConnections Connecting example AV equipmentConnecting with Video IN/S-VIDEO Connecting with DVI-DDirect power off function Switching the projector on/offConnecting Direct power on functionPower indicator informs you the status of the power Power indicatorSwitching the projector on/off Switch off the Main Power on the back of the projector Switching on the projectorSwitching off the projector Switch the Main Power on Press the power buttonPositioning the image Selecting the input signalProjecting an image Facing to the projector Remote control operationSetting up the image position automatically Operating rangeEnlarging the centred area Switching the input signalStopping the projection Resetting to the factory default settingsProjecting an image in INDEX-WINDOW mode Capturing an imageProjecting 2 different source image at a time Using an assigned functionSwitching the signal Side by Side function signal combination tableLaser pointer beam emitter Using the laser pointerControlling the volume of the speaker Disable the Laser buttonOSD Design Menu NavigationMain menu and Sub-menu Input GuideMenu Navigation Filter Counter ResetDisplaying the Main menu Adjusting with the bar scale itemsOperating procedure Navigating through the menuPicture menu TV-SYSTEM Color TemperatureDaylight View Digital Cinema RealityPosition menu 169 AspectPosition menu Aspect ratio optionsFrame Lock ON-SCREEN Display Screen SettingDisplay Option menu DVI-DSxga Mode Auto SetupSignal Search Wide ModeOther Functions COMPUTER2 Select Projector Setup menuNo Signal SHUT-OFF StatusEmulate InstallationHigh Altitude Mode Audio SettingRemaining Filter of Status in Projector Filter Counter ResetTest Pattern Initialize ALLText Display PasswordPassword Change Security menuSecurity menu Menu Lock PasswordControl Device Setup Menu LockNetwork menu, the following items are available Wireless LAN PT-FW300NTEonlyNetwork menu Items in Network menuTemp indicator TEMP, Lamp and Filter IndicatorsManaging the indicated problems Lamp indicatorReplacing the Lamp unit Care and ReplacementCleaning the projector Before replacing the ACF Replacing the Auto Cleaning Filter ACFCare and Replacement Replacement procedure When to replace the ACFOn a soft cloth Resetting the RemainingCounter Reset in Projector Setup Turn the projector upside down and place it gentlyTroubleshooting KHz MHz List of compatible signalsTechnical Information Quality*2Serial terminal Projector Technical Information Cable specificationsControl commands Computer connection guidanceRemote terminal Lamp switchingSwitching input Signals Input signalDVI-D in terminal Ceiling mount bracket safeguardsInstalling the safety cable LW m = 0.0339 x SD LT m = 0.0653 x SD Screen size and throw distance for 169 aspect ratioScreen size and throw distance for 43 aspect ratio SW m = SD x SH m = SD xSpecifications Audio VideoOUT DVI-DUnit mm DimensionsTrademark acknowledgements Digital Cinema Reality Digital Zoom IndexIndex Picture Mode