Panasonic PT-FW300NTE, PT-FW300E manual Filter Counter Reset, Test Pattern, Initialize ALL

Page 45

 

PROJECTOR SETUP menu

 

 

 

COMPUTER2

 

 

FILTER COUNTER RESET

 

COM.AUDIO IN 2

 

Output audio that is input to the

After you replaced the Auto Cleaning Filter (ACF),

COMPUTER AUDIO 2.

REMAINING FILTER of STATUS in PROJECTOR

AUDIO IN Output audio that is input to the

SETUP need to be reset to "0".

AUDIO IN.

1. Press the ENTER button for more than 3 seconds.

 

TEST PATTERN

You can use the 7 different test patterns to adjust the focus of the image. See “Lens shift and positioning” on page 19.

1.Press the ENTER button to display the test pattern 1.

2.Press I H to select the required test pattern.

3.Adjust the focus with the focus lever.

4.Press the MENU or RETURN button to return to the previous menu, or press repeatedly to escape from the menu mode.

The confirmation screen will be displayed.

2.Select OK by pressing I, then press the ENTER button.

3.Display the STATUS and confirm the figure.

NOTE:

When the projector and/or the screen is tilted, adjust the focus at the centre of the image. The upper and lower edge might be out of focus.

When the image is distorted in keystone, adjust the KEYSTONE in POSITION menu.

INITIALIZE ALL

You can reset all of the customised settings to the factory defaults except NETWORK, RUNTIME and REMAINING FILTER of STATUS in PROJECTOR SETUP menu.

1.Press the ENTER button.

2.Select OK by pressing I, then press the ENTER button.

3.Turn off the power by pressing the power button.

4.Switch off the MAIN POWER button to reset the projector.

5.Switch on the MAIN POWER button.

6.Press the power button.

7.The minimum required setting screen will be displayed.

See “Minimum required setting screen” on page 13.

NOTE:

The security system is deactivated by default and when initialised.

When the projector is initialised, it will be reset to the factory default password operation.

Settings

ENGLISH - 45

Image 45
Contents PT-FW300E Important Safety Notice This Apparatus Must be EarthedTo rain or moisture For business users in the European Union Important Safety NoticeDeclaration of Conformity DoC Declaration of ConformityEnglish Contents Maintenance SettingsContents AppendixPrecautions with regard to safety Precautions with regard to safety Do not set up the projector outdoorsDo not look into the lens while the projector is being used Do not put your weight on this projector Remove the used batteries from the remote control promptlyUse only the specified batteries Do not mix old and new batteriesOrder to get the best picture quality SecurityLiquid crystal panel Optical componentsAccessories Power cord secure lockMains lead Read this first Minimum required setting screenProjector body About Your ProjectorTop and front view Control panelAbout Your Projector Back and bottom view Auto cleaning filter ACF Front leg Adjusters CompartmentSecurity lock Lamp unit compartment Air exhaust portAttaching a hand strap Top view Remote control indicator Remote controlCLOCK, Clock Phase and Signal Search for Battery compartmentScreen size and throw distance Setting upCalculation methods Projection size 16 Throw distance LSetting up Front leg adjusters and throwing angleProjection method Mounting on the ceiling and projecting from frontLens shift and positioning Adjusting the lens shift leverHorizontal shift Vertical shiftSetting up Projector location range When the screen position is fixedWhen the projector position is fixed Connections Connecting example ComputersBefore connection to the projector LAN terminalConnecting with Video IN/S-VIDEO Connecting example AV equipmentConnecting with DVI-D ConnectionsConnecting Switching the projector on/offDirect power on function Direct power off functionPower indicator Switching the projector on/offPower indicator informs you the status of the power Switching off the projector Switching on the projectorSwitch the Main Power on Press the power button Switch off the Main Power on the back of the projectorSelecting the input signal Projecting an imagePositioning the image Setting up the image position automatically Remote control operationOperating range Facing to the projectorEnlarging the centred area Switching the input signalProjecting an image in INDEX-WINDOW mode Resetting to the factory default settingsCapturing an image Stopping the projectionSwitching the signal Using an assigned functionSide by Side function signal combination table Projecting 2 different source image at a timeControlling the volume of the speaker Using the laser pointerDisable the Laser button Laser pointer beam emitterMain menu and Sub-menu Menu NavigationInput Guide OSD DesignMenu Navigation Filter Counter ResetOperating procedure Adjusting with the bar scale itemsNavigating through the menu Displaying the Main menuPicture menu Daylight View Color TemperatureDigital Cinema Reality TV-SYSTEMPosition menu Position menu AspectAspect ratio options 169Frame Lock Display Option menu Screen SettingDVI-D ON-SCREEN DisplaySignal Search Auto SetupWide Mode Sxga ModeOther Functions No Signal SHUT-OFF Projector Setup menuStatus COMPUTER2 SelectHigh Altitude Mode InstallationAudio Setting EmulateTest Pattern Filter Counter ResetInitialize ALL Remaining Filter of Status in ProjectorPassword Change PasswordSecurity menu Text DisplayControl Device Setup Menu Lock PasswordMenu Lock Security menuNetwork menu Wireless LAN PT-FW300NTEonlyItems in Network menu Network menu, the following items are availableManaging the indicated problems TEMP, Lamp and Filter IndicatorsLamp indicator Temp indicatorCare and Replacement Cleaning the projectorReplacing the Lamp unit Care and Replacement Replacement procedure Replacing the Auto Cleaning Filter ACFWhen to replace the ACF Before replacing the ACFCounter Reset in Projector Setup Resetting the RemainingTurn the projector upside down and place it gently On a soft clothTroubleshooting Technical Information List of compatible signalsQuality*2 KHz MHzSerial terminal Control commands Technical Information Cable specificationsComputer connection guidance ProjectorSwitching input Signals Lamp switchingInput signal Remote terminalCeiling mount bracket safeguards Installing the safety cableDVI-D in terminal Screen size and throw distance for 43 aspect ratio Screen size and throw distance for 169 aspect ratioSW m = SD x SH m = SD x LW m = 0.0339 x SD LT m = 0.0653 x SDSpecifications OUT VideoDVI-D AudioDimensions Trademark acknowledgementsUnit mm Digital Cinema Reality Digital Zoom IndexIndex Picture Mode