Panasonic PT-FW300E manual Projecting an image, Selecting the input signal, Positioning the image

Page 26

Projecting an image

Selecting the input signal

1. Switch on the connected devices.

Press the play button of the required device.

2.Press the INPUT SELECT buttons to select the required input method if needed. See “Switching the input signal” on page 28.

The image will be projected on the screen.

NOTE:

•SIGNAL SEARCH is ON as default and the signal from the connected devices is detected automatically. See “SIGNAL SEARCH” on page 41.

Basic Operation

Positioning the image

1.Open the front panel cover.

2.Adjust the projected image with the lens shift lever. See “Lens shift and positioning” on page 19.

3. Adjust the angle of the projector.

Screw down the front leg adjusters and adjust the angle vertically.

See “Front leg adjusters and throwing angle” on page 18.

4.Adjust the focus and the projected image size.

Turn the focus lever and zoom lever to adjust the image.

You can confirm the adjusted effect with the TEST PATTERN in OPTION menu. See “TEST PATTERN” on page 45.

Focus lever

Zoom lever

NOTE:

•Do not touch the air exhaust port as this may cause burns or injury.

•If keystone distortion occurs, see “KEYSTONE” on page 37.

•If you adjust the focus, you may need to adjust the size of the image by moving the zoom lever again.

ENGLISH - 26

Image 26

Contents PT-FW300E To rain or moisture Important Safety NoticeThis Apparatus Must be Earthed Important Safety Notice For business users in the European UnionDeclaration of Conformity Declaration of Conformity DoCEnglish Contents Contents SettingsMaintenance AppendixPrecautions with regard to safety Do not look into the lens while the projector is being used Precautions with regard to safetyDo not set up the projector outdoors Use only the specified batteries Remove the used batteries from the remote control promptlyDo not put your weight on this projector Do not mix old and new batteriesLiquid crystal panel SecurityOrder to get the best picture quality Optical componentsMains lead AccessoriesPower cord secure lock Minimum required setting screen Read this firstTop and front view About Your ProjectorProjector body Control panelSecurity lock Auto cleaning filter ACF Front leg Adjusters CompartmentAbout Your Projector Back and bottom view Lamp unit compartment Air exhaust portCLOCK, Clock Phase and Signal Search for Remote controlAttaching a hand strap Top view Remote control indicator Battery compartmentCalculation methods Setting upScreen size and throw distance Projection size 16 Throw distance LProjection method Front leg adjusters and throwing angleSetting up Mounting on the ceiling and projecting from frontHorizontal shift Adjusting the lens shift leverLens shift and positioning Vertical shiftWhen the projector position is fixed Setting up Projector location rangeWhen the screen position is fixed Before connection to the projector Connecting example ComputersConnections LAN terminalConnecting with DVI-D Connecting example AV equipmentConnecting with Video IN/S-VIDEO ConnectionsDirect power on function Switching the projector on/offConnecting Direct power off functionPower indicator informs you the status of the power Power indicatorSwitching the projector on/off Switch the Main Power on Press the power button Switching on the projectorSwitching off the projector Switch off the Main Power on the back of the projectorPositioning the image Selecting the input signalProjecting an image Operating range Remote control operationSetting up the image position automatically Facing to the projectorSwitching the input signal Enlarging the centred areaCapturing an image Resetting to the factory default settingsProjecting an image in INDEX-WINDOW mode Stopping the projectionSide by Side function signal combination table Using an assigned functionSwitching the signal Projecting 2 different source image at a timeDisable the Laser button Using the laser pointerControlling the volume of the speaker Laser pointer beam emitterInput Guide Menu NavigationMain menu and Sub-menu OSD DesignFilter Counter Reset Menu NavigationNavigating through the menu Adjusting with the bar scale itemsOperating procedure Displaying the Main menuPicture menu Digital Cinema Reality Color TemperatureDaylight View TV-SYSTEMPosition menu Aspect ratio options AspectPosition menu 169Frame Lock DVI-D Screen SettingDisplay Option menu ON-SCREEN DisplayWide Mode Auto SetupSignal Search Sxga ModeOther Functions Status Projector Setup menuNo Signal SHUT-OFF COMPUTER2 SelectAudio Setting InstallationHigh Altitude Mode EmulateInitialize ALL Filter Counter ResetTest Pattern Remaining Filter of Status in ProjectorSecurity menu PasswordPassword Change Text DisplayMenu Lock Menu Lock PasswordControl Device Setup Security menuItems in Network menu Wireless LAN PT-FW300NTEonlyNetwork menu Network menu, the following items are availableLamp indicator TEMP, Lamp and Filter IndicatorsManaging the indicated problems Temp indicatorReplacing the Lamp unit Care and ReplacementCleaning the projector When to replace the ACF Replacing the Auto Cleaning Filter ACFCare and Replacement Replacement procedure Before replacing the ACFTurn the projector upside down and place it gently Resetting the RemainingCounter Reset in Projector Setup On a soft clothTroubleshooting Quality*2 List of compatible signalsTechnical Information KHz MHzSerial terminal Computer connection guidance Technical Information Cable specificationsControl commands ProjectorInput signal Lamp switchingSwitching input Signals Remote terminalDVI-D in terminal Ceiling mount bracket safeguardsInstalling the safety cable SW m = SD x SH m = SD x Screen size and throw distance for 169 aspect ratioScreen size and throw distance for 43 aspect ratio LW m = 0.0339 x SD LT m = 0.0653 x SDSpecifications DVI-D VideoOUT AudioUnit mm DimensionsTrademark acknowledgements Index Digital Cinema Reality Digital ZoomPicture Mode Index