Panasonic PT-F200NTU/PT-FW100NTU, PT-F200NTE/PT-FW100NTE manual Connecting through the access point

Page 15
If you are unable to connect to the wireless LAN through the access point even after performing the steps in “ settings,” contact the manufacturer of the access point.
15
Projector
[ ] appears in the menu bar and a connection is established with the projector. (“Menu description” See page 21)
If the projector is not displayed, click [Designate] followed by [ADD], then enter the IP address set in the projector using the <Access Port Registration> window, and click [REGISTER]. (See page 18)
8
A confirmation message appears asking whether to switch the projector to the network or not. Select [No].
Select the desired projector on the <Select Access Port> window and click [OK].
When the user does not have the [Admin (administrator)] authority, the [Admin (administrator)]’s name and password are required to make network settings.
6 Connect to your access point.
7 Start Wireless Manager ME 4.5, click [Wireless LAN] on the <Network Adapter Selection> window and select the network adapter connected to the access port.
Turn on the computer.
Make the network setting according to your system administrator.
4
5
The projector’s MAC addresscan be checked with [STATUS] in the network menu of the projector unit. (“Verifying settings” see page 34) “Glossary” (See page 44)
Computer settings
As for network setting items, see pages 29 - 31.
Confirm to your system administrator on network settings before changing any settings.

Connecting with wireless LAN (cont.)

Connecting through the access point

You can make the setting for infrastructure mode(connection through the access point); however, confirm to your system administrator on network settings before changing any settings.

“Glossary” (See pages 44 - 45)

Projector settings

1Turn on the projector and press the [NETWORK] button on the remote control.

2Select [USER 1]- [USER 3] from [WIRELESS LAN] at the network menu and press the [ENTER] button.

3Set the details of network and select [OK].

Image 15
Contents Macintosh Network Function Edition Contents Software Licensing Agreement Using the projector outside the country Do not use near other wireless equipmentChannels that can be used Wired LANRequest Regarding Security WebBrowser control See Live mode SeeLive mode cut-in function See Network TransmissionWireless LAN Check your computerNecessary environment for computers to be connected System requirements Software InstallationContents on Provided CD-ROM Software InstallationClick the install target or in the Dock Connecting with wireless LANEasy Wireless Set Up Detailed settingsConnectability Connecting with wireless LANAvailable mode and functions NetworkSelect the desired projectors, and click OK LAN menu of the projector to connectConnection error messages Connecting through the access point Launch Wireless Manager ME Connecting with Wired LANSelecting the connection method Adding and deleting connections Operations when password entry is required for connectionClick Designate at the Select Access Port window Other operations for connectionSearching by projector’s ID Other operations for connectionCanceling the connection Click in the menu bar, followed by Quit Wireless ManagerClick Yes Menu Various projection methodsMenu description Status indicationLive mode Quitting live modeVarious projection methods Click Shutter function from the menu again Useful FunctionsShutter function Click Shutter function from the menuClick the desired tab to be set Click OK Setting optionsSetting option window Click OPTION... from the menuKey setting Setting optionsAutomatic connection setting OtherVersion information Select Network with the Ÿź buttons Network setting of the projectorDisplaying the Network Menu Press the Menu button on the projectorNetwork setting of the projector Wired LAN settingsDefault wired LAN settings How to display IP address setting menu User settingsIP address settings Press Wireless LAN USER1-USER3 Enter at the network menuSsid ※ Wireless settingsDefault settings of USER1-USER3 Password setting Select Input Password at the network menuChanging the projector name Select Network Standby at the network menu Live mode cut-inSelect Live Mode CUT in at the network menu Network standbyVerifying settings Returning to the Initial SettingsSelect OK with the buttons and press the Enter button Using WebBrowser Before using the WebBrowser controlProxy server settings Select WEB control from the menu Using WebBrowserAccessing from the WebBrowser Enter the user name and the password Click OKOn this window, click the Status information tab Monitor information windowMonitored information Network information If Failed appearsProjector control window Basic control window Advanced control windowOn this window, click the Basic control tab Making the above settings effective Detailed settings windowCompleteNEXT. the detailed settings and click LAN settingsEmail settings Time settingsIf Simple is selected under Mail Contents If Normal is selected under Mail ContentsPassword settings Authentication server settingsWireless Manager ME Software UninstallGlossary Glossary Network setting error Frequently Asked QuestionsTransfer rate is slow Frequently Asked QuestionsConnection to the wireless LAN or wired LAN is lost Connection cannot be established with IEEE802.11 gWeb control window does not appear Making a wireless LAN connection while using the internetPanasonic Projector Systems Company Trademarks