Panasonic PT-F200NTE/PT-FW100NTE Other operations for connection, Searching by projector’s ID

Page 19

The <Select Access Port> window appears.

For procedures for displaying menus, see page 21.

Click [ID Search].

<Projector ID Search> window appears.

Enter four figures of desired projector’s ID, and click [Search].

Start Searching.

Other operations for connection (cont.)

Searching by projector’s ID

Even if there are two or more projectors with the same name, an ID ([Proj] + 4-digit number) is assigned to each projector to enable the projectors to be identified.

When you click [ID Search], a search for the projector of the specified ID is carried out from among the projectors that are presently switched on, from all network numbers other than [U].

It is necessary to know ID in advance. When input selection is switched to [NETWORK] on a projector, the ID appears on the upper right of the projection screen for approximately 5 seconds. If you write down the ID displayed in the [ID] column of the [Details] screen on the <Select Access Port> window in advance, you can search a projector by the ID from next time.

1Click [Select Access Port] in the menu.

2

3

4When the projector of the applicable ID is found, the computer will be connected to that projector, and the status display of the menu bar will turn green.

If appropriate ID is not found, an error message appears.

19

Image 19

Contents Macintosh Network Function Edition Contents Software Licensing Agreement Using the projector outside the country Do not use near other wireless equipmentChannels that can be used Wired LANRequest Regarding Security WebBrowser control See Live mode SeeLive mode cut-in function See Network TransmissionCheck your computer Wireless LANNecessary environment for computers to be connected System requirements Software InstallationContents on Provided CD-ROM Software InstallationClick the install target or in the Dock Connecting with wireless LANEasy Wireless Set Up Detailed settingsConnectability Connecting with wireless LANAvailable mode and functions NetworkSelect the desired projectors, and click OK LAN menu of the projector to connectConnection error messages Connecting through the access point Launch Wireless Manager ME Connecting with Wired LANSelecting the connection method Adding and deleting connections Operations when password entry is required for connectionClick Designate at the Select Access Port window Other operations for connectionSearching by projector’s ID Other operations for connectionClick in the menu bar, followed by Quit Wireless Manager Canceling the connectionClick Yes Menu Various projection methodsMenu description Status indicationQuitting live mode Live modeVarious projection methods Click Shutter function from the menu again Useful FunctionsShutter function Click Shutter function from the menuClick the desired tab to be set Click OK Setting optionsSetting option window Click OPTION... from the menuKey setting Setting optionsOther Automatic connection settingVersion information Select Network with the Ÿź buttons Network setting of the projectorDisplaying the Network Menu Press the Menu button on the projectorWired LAN settings Network setting of the projectorDefault wired LAN settings How to display IP address setting menu User settingsIP address settings Press Wireless LAN USER1-USER3 Enter at the network menuSsid ※ Wireless settingsDefault settings of USER1-USER3 Select Input Password at the network menu Password settingChanging the projector name Select Network Standby at the network menu Live mode cut-inSelect Live Mode CUT in at the network menu Network standbyReturning to the Initial Settings Verifying settingsSelect OK with the buttons and press the Enter button Before using the WebBrowser control Using WebBrowserProxy server settings Select WEB control from the menu Using WebBrowserAccessing from the WebBrowser Enter the user name and the password Click OKOn this window, click the Status information tab Monitor information windowMonitored information Network information If Failed appearsBasic control window Advanced control window Projector control windowOn this window, click the Basic control tab Making the above settings effective Detailed settings windowCompleteNEXT. the detailed settings and click LAN settingsEmail settings Time settingsIf Simple is selected under Mail Contents If Normal is selected under Mail ContentsPassword settings Authentication server settingsWireless Manager ME Software UninstallGlossary Glossary Network setting error Frequently Asked QuestionsTransfer rate is slow Frequently Asked QuestionsConnection to the wireless LAN or wired LAN is lost Connection cannot be established with IEEE802.11 gWeb control window does not appear Making a wireless LAN connection while using the internetPanasonic Projector Systems Company Trademarks