Panasonic PT-F200NTE/PT-FW100NTE, PT-F200NTU/PT-FW100NTU LAN menu of the projector to connect

Page 13

Connecting with wireless LAN (cont.)

2	In [Network], select the same network number as is displayed in the [WIRELESS
2	LAN] menu of the projector to connect.
	Projectors powered on in the chosen network group are listed.
3	Select the desired projectors, and click [OK].
3	[ ] appears in the menu bar and a connection is established with the projector.

(“Menu description” See page 21)

• Easy Wireless Set Up cannot be made between the projector and the computer. (See page 46)

• Automatic connection setting (See page 26)

※1

•In the following situation, connections other than [U] are not possible. - When not installed in the [Applications] folder

•Depending on the computer and wireless LAN card used, Easy Wireless Set Up may not be possible. If this is the case, the [Network] setting of <Select Access Port> window will be switched to [U] automatically. For details of the connection procedure, first close Wireless Manager ME 4.5, and then refer to page 15.

※2

•The initial network number for both the projector and Wireless Manager ME 4.5 is [1]. These numbers must match for the connection. To check the network number, refer to the network menu of the projector.

•Although WEP (Wired Equivalent Privacy)※ is not set for network number [1], WEP (Wired Equivalent Privacy)※ is set for network numbers [2] through [4], so set [2] through [4] if security is to be emphasized.

•Important image data is protected because AES※ encryption processing takes place in advance for all network numbers, even if [ENCRYPTION] is set to [NONE].

•Other network adapters may not be usable under Easy Wireless Set Up connections.

•Connections to other networks connected through the wireless LAN card are broken under Easy Wireless Set Up connections.

※ “Glossary” (See page 45)

13

Image 13

Contents Macintosh Network Function Edition Contents Software Licensing Agreement Using the projector outside the country Do not use near other wireless equipmentChannels that can be used Wired LANRequest Regarding Security Live mode cut-in function See Live mode SeeNetwork Transmission WebBrowser control SeeCheck your computer Wireless LANNecessary environment for computers to be connected System requirements Software InstallationContents on Provided CD-ROM Software InstallationEasy Wireless Set Up Connecting with wireless LANDetailed settings Click the install target or in the DockAvailable mode and functions Connecting with wireless LANNetwork ConnectabilitySelect the desired projectors, and click OK LAN menu of the projector to connectConnection error messages Connecting through the access point Launch Wireless Manager ME Connecting with Wired LANSelecting the connection method Click Designate at the Select Access Port window Operations when password entry is required for connectionOther operations for connection Adding and deleting connectionsSearching by projector’s ID Other operations for connectionClick in the menu bar, followed by Quit Wireless Manager Canceling the connectionClick Yes Menu description Various projection methodsStatus indication MenuQuitting live mode Live modeVarious projection methods Shutter function Useful FunctionsClick Shutter function from the menu Click Shutter function from the menu againSetting option window Setting optionsClick OPTION... from the menu Click the desired tab to be set Click OKKey setting Setting optionsOther Automatic connection settingVersion information Displaying the Network Menu Network setting of the projectorPress the Menu button on the projector Select Network with the Ÿź buttonsWired LAN settings Network setting of the projectorDefault wired LAN settings IP address settings User settingsPress Wireless LAN USER1-USER3 Enter at the network menu How to display IP address setting menuSsid ※ Wireless settingsDefault settings of USER1-USER3 Select Input Password at the network menu Password settingChanging the projector name Select Live Mode CUT in at the network menu Live mode cut-inNetwork standby Select Network Standby at the network menuReturning to the Initial Settings Verifying settingsSelect OK with the buttons and press the Enter button Before using the WebBrowser control Using WebBrowserProxy server settings Accessing from the WebBrowser Using WebBrowserEnter the user name and the password Click OK Select WEB control from the menuMonitored information Network information Monitor information windowIf Failed appears On this window, click the Status information tabBasic control window Advanced control window Projector control windowOn this window, click the Basic control tab CompleteNEXT. the detailed settings and click Detailed settings windowLAN settings Making the above settings effectiveEmail settings Time settingsIf Simple is selected under Mail Contents If Normal is selected under Mail ContentsPassword settings Authentication server settingsWireless Manager ME Software UninstallGlossary Glossary Network setting error Frequently Asked QuestionsConnection to the wireless LAN or wired LAN is lost Frequently Asked QuestionsConnection cannot be established with IEEE802.11 g Transfer rate is slowWeb control window does not appear Making a wireless LAN connection while using the internetPanasonic Projector Systems Company Trademarks