Panasonic PT-F200NTE/PT-FW100NTE, PT-F200NTU/PT-FW100NTU manual Default settings of USER1-USER3

Page 31

Network setting of the projector (cont.)

Additionally perform the following setting using the [AUTHENTICATION] setting.

WIRELESS DETAILED SETUP

	USER1	3/3
	DEFAULT KEY	1
	KEY1	＊＊＊＊＊＊＊＊
	KEY2	＊＊＊＊＊＊＊＊
	KEY3	＊＊＊＊＊＊＊＊
	RETURN	＊＊＊＊＊＊＊＊
SELECT	KEY4	＊＊＊＊＊＊＊＊
SELECT

RETURN OK CANCEL

When setting [OPEN] or [SHARED] as authentication and setting [WEP※] as the encryption method: DEFAULT KEY : Set 1 – 4 numerals for the default key.

KEY 1 – 4 : Set these to match the WEP key registered in [DEFAULT KEY].

Either the 64-bit or 128-bit WEP key can be set. For the 64-bit key, input five alphanumerics (or a 10-digit string for the hexadecimal format) for the 128-bit key, input 13 alphanumerics (or a 26-digit string for the hexadecimal format).

When setting [WPA-PSK※] as authentication : Set key and select [OK].

Input either 8 to 63 alphanumerics or a 64 digit string in the hexadecimal format.

※“Glossary” (See page 45)

Important video/audio data is protected because AES※ encryption processing takes place in advance for all network numbers, even if [ENCRYPTION] is set to [NONE].

※“Glossary” (See page 45)

Default settings of [USER1]-[USER3]

The following settings as [USER1]-[USER3] in the wireless LAN are set before the projector leaves the factory.

SSID	: Panasonic Projector
DHCP	: OFF
IP ADDRESS	: 192.168.11.100
SUBNETMASK	: 255.255.255.0
GATEWAY	: 192.168.11.1
MODE	: AD HOC
AUTHENTICATION : OPEN
ENCRYPTION	: NONE

31

Image 31

Contents Macintosh Network Function Edition Contents Software Licensing Agreement Using the projector outside the country Do not use near other wireless equipmentChannels that can be used Wired LANRequest Regarding Security WebBrowser control See Live mode SeeLive mode cut-in function See Network TransmissionCheck your computer Wireless LANNecessary environment for computers to be connected System requirements Software InstallationContents on Provided CD-ROM Software InstallationClick the install target or in the Dock Connecting with wireless LANEasy Wireless Set Up Detailed settingsConnectability Connecting with wireless LANAvailable mode and functions NetworkSelect the desired projectors, and click OK LAN menu of the projector to connectConnection error messages Connecting through the access point Launch Wireless Manager ME Connecting with Wired LANSelecting the connection method Adding and deleting connections Operations when password entry is required for connectionClick Designate at the Select Access Port window Other operations for connectionSearching by projector’s ID Other operations for connectionClick in the menu bar, followed by Quit Wireless Manager Canceling the connectionClick Yes Menu Various projection methodsMenu description Status indicationQuitting live mode Live modeVarious projection methods Click Shutter function from the menu again Useful FunctionsShutter function Click Shutter function from the menuClick the desired tab to be set Click OK Setting optionsSetting option window Click OPTION... from the menuKey setting Setting optionsOther Automatic connection settingVersion information Select Network with the Ÿź buttons Network setting of the projectorDisplaying the Network Menu Press the Menu button on the projectorWired LAN settings Network setting of the projectorDefault wired LAN settings How to display IP address setting menu User settingsIP address settings Press Wireless LAN USER1-USER3 Enter at the network menuSsid ※ Wireless settingsDefault settings of USER1-USER3 Select Input Password at the network menu Password settingChanging the projector name Select Network Standby at the network menu Live mode cut-inSelect Live Mode CUT in at the network menu Network standbyReturning to the Initial Settings Verifying settingsSelect OK with the buttons and press the Enter button Before using the WebBrowser control Using WebBrowserProxy server settings Select WEB control from the menu Using WebBrowserAccessing from the WebBrowser Enter the user name and the password Click OKOn this window, click the Status information tab Monitor information windowMonitored information Network information If Failed appearsBasic control window Advanced control window Projector control windowOn this window, click the Basic control tab Making the above settings effective Detailed settings windowCompleteNEXT. the detailed settings and click LAN settingsEmail settings Time settingsIf Simple is selected under Mail Contents If Normal is selected under Mail ContentsPassword settings Authentication server settingsWireless Manager ME Software UninstallGlossary Glossary Network setting error Frequently Asked QuestionsTransfer rate is slow Frequently Asked QuestionsConnection to the wireless LAN or wired LAN is lost Connection cannot be established with IEEE802.11 gWeb control window does not appear Making a wireless LAN connection while using the internetPanasonic Projector Systems Company Trademarks