Panasonic PT-F200NTU manual Switching the projector on/off, Power cord, Power indicator

Page 20

Switching the projector on/off

Power cord

Connecting

1.Make sure the shape of the power cord and

the AC IN connector on the back of the

projector match, then

push the plug all the way in.

2. Connect the Mains lead to a wall socket.

Disconnecting

1.Make sure the MAIN POWER is switched off and unplug the Mains lead from the wall socket.

2.Hold the plug and unplug the Mains lead from the AC IN connector on the back of the projector.

Direct power off function

You can disconnect the Mains lead from the projector or switch off the MAIN POWER button while projecting or soon after projecting. The internal lamp cooling fan will keep operating by the internal power supply.

NOTE:

•If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take a while to start the projection.

Direct power on function

If you activate the DIRECT POWER ON, you can start the projection only with connecting the Mains lead or switching on the MAIN POWER. See “DIRECT POWER ON” on page 35.

Basic Operation

NOTE:

•Do not use other than a provided Mains lead.

•Ensure all the input devices are connected and turned off before connecting the Mains lead.

•Do not force the connector as this may damage the projector and/or the power cord.

•Dirt or dust build-up around plugs may cause fire or electrical hazards.

•Switch off the power to the projector when not in use.

POWER indicator

POWER indicator

Indicator status

Status

 

 

 

No illumination or flashing

The MAIN POWER is switched off.

 

 

 

 

 

The MAIN POWER is switched on and the projector is in standby.

 

Lit

When the LAMP or TEMP indicator is flashing, the POWER indicator will

RED

 

not be lit.

 

Flashing

Network connection is ready while the POWER is turned off.

 

(PT-F200NTU only)

 

 

 

 

 

GREEN

Flashing

The POWER is switched on and the projector is getting ready to project.

 

 

Lit

The projector is ready to project.

 

 

 

 

 

Lit

The POWER is switched off and the projector is cooling the lamp.

ORANGE

 

 

Flashing

The POWER is switched on again when cooling the lamp and recovering

 

 

to projection mode. Recovery may take a while.

 

 

 

 

 

NOTE:

•If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take a while to start the projection.

•The electric consumption in standby mode is 3.5 W.

ENGLISH - 20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents PT-F200U Important Safety Notice Model number PT-F200NTU / PT-F200UImportant Safety Notice Declaration of ConformityModel Number PT-F200NTU / PT-F200U Trade Name PanasonicContents Appendix SettingsMaintenance Precautions with regard to safety Precautions with regard to safety Do not set up the projector outdoorsDo not look into the lens while the projector is being used Use only the specified batteriesRemove the used batteries from the remote control promptly Do not put your weight on this projectorDo not mix old and new batteries Electric shocks can result if this is not doneAccessories SecurityMinimum required setting screen Read this firstRemote control About Your ProjectorProjector body About Your ProjectorTop and front view Control panelOutput by menu operation About Your Projector Back and bottom viewComputer. Selectable for input Setting up Calculation methods for screen dimensionsScreen size and throw distance Projected image ScreenFront leg adjusters and throwing angle Setting upProjection method Mounting in the ceiling and projecting from frontAdjusting the Lens shift lever Lens shift and positioningHorizontal shift Vertical shiftWhen the projector position is fixed Setting up Projector location rangeWhen the screen position is fixed Connecting example Computers ConnectionsBefore connection to the projector LAN terminalConnecting example AV equipments Connecting with Video IN/S-VIDEOConnecting with Component ConnectionsPower indicator Switching the projector on/offPower cord Switching on the projector Switching off the projectorSwitching the projector on/off Switch the Main Power on Press the Power buttonSelecting the input signal Projecting an imagePositioning the image Focus lever Zoom leverRemote control operation Setting up the image position automaticallyOperating range Facing to the projectorSwitching the input signal Using the laser pointerResetting to the factory default settings Projecting an image in INDEX-WINDOW modeCapturing an image Stopping the projection temporaryControlling the volume of the speaker Enlarging the centered areaEnlarging the image Shifting the center pointAdjusting with the bar scale items Menu NavigationNavigating through the Menu Displaying the Main menuMain menu and Sub-menu Menu NavigationLive Mode CUT Status Initialize Audio BalanceNetwork Standby WEB ControlPicture menu For RGB signals Detailed SetupFor S-VIDEO/VIDEO signals Position menu When the Resizing is set to OFF ResizingFrame Lock Position menuOption menu Power OFF Timer Direct Power onAuto Setup Signal SearchTest Pattern SettingClosed Caption Input Password Password ChangeSecurity menu Text DisplayNetwork menu, the following items are available Network menuItems in Network menu LAMP, Temp and ARF Indicators Managing the indicated problemsLamp indicator Temp indicatorReplacing the ARF Auto Rolling Filter Care and ReplacementCleaning the projector Care and Replacement Resetting the Filter When to replace the Lamp unitReplacing the Lamp unit Before replacing the Lamp unitCeiling mount bracket safeguards Care and Replacement Replacement procedureInstalling the safety cable Removing and replacing the lamp unitTroubleshooting List of compatible signals Technical InformationQuality*2 Dots*1 KHz MHzSerial terminal Technical Information Cable specifications Control commandsComputer connection guidance ProjectorRemote terminal Lamp switchingSwitching input Signals Specifications COMPUTER1 OUTAudio Computer AudioScreen height SH Screen width SW Minimum distance Screen size and throw distance for 169 aspect ratioProjection size 16 Throw distance L Dimensions Trademark acknowledgementsUnit mm These Operating Instructions are printed on recycled paperIndex ALS Ambient Luminance SensorARF Auto Rolling Filter Calculation methodsIndex Navigation buttonsScreen size Technical InformationNuméro de série Avis important concernant la sécuritéNuméro de modèle PT-F200NTU / PT-F200U Déclaration de conformité Avis important concernant la sécuritéAvertissement Précautions de sécurité AvertissementsMises EN Garde Précautions de sécuritéSinon cela peut causer des chocs électriques Utiliser uniquement les piles spécifiéesNe pas mélanger des piles usées et des piles neuves Précautions lors de lutilisation Précautions lors de linstallationPrécautions lors du transport Remplacement de lunité de la lampe Délai de remplacement de lUnité de la lampe«LAMPE DE REMPLACEMENT» est Avant de remplacer le lUnité de la lampeInstallation du câble de sécurité Protections du support de montage au plafondRetirer et remplacer la lampe De lUnité de La lampePanasonic Projector Systems Company Technical Support
Top Page Image Contents