Panasonic PT-F200NTU manual Replacing the Lamp unit, Care and Replacement Resetting the Filter

Page 41

Care and Replacement

Resetting the FILTER

 

 

 

 

REMAINING

 

FILTER REMAINING

 

 

 

 

 

RESET A REMAIN OF A FILETER.

 

1. Turn on the projector and display the FILTER

 

 

 

 

 

 

REMAINING in OPTION menu. Press the ENTER

 

OK

CANCEL

 

button for 3 seconds and the confirmation screen

 

 

will be displayed.

 

 

RETURN

2. Press I to select OK and press the ENTER

 

 

 

SELECT

 

 

button to reset FILTER REMAINING to “0”. See

 

 

 

 

 

ENTER

“FILTER REMAINING” on page 34.

 

 

 

 

 

 

Replacing the Lamp unit

Before replacing the Lamp unit

Switch off the MAIN POWER and disconnect the power plug from the wall socket.

Wait for more than 1 hour and make sure the Lamp unit and the surroundings are cooled enough. Prepare a Phillips-head screwdriver.

Contact an Authorized Service Center to purchase a replacement Lamp unit (ET-LAF100).

When the projector is mounted in the ceiling, do not work directly under the projector or put your face closer to the projector.

NOTE:

Prior to replacing the lamp unit, allow it to cool down to prevent the risk of burns, damage and other hazards.

Do not attempt replacement with an unauthorized lamp unit.

When to replace the Lamp unit

The Lamp unit is consumable and the brightness decreases by duration of usage. The LAMP indicator will inform you of the replacement timing at 4 800 hours, and at 5 000 hours, the projector will be turned off. Those figures are rough guidance and might be shortened by the usage conditions, characteristics of the Lamp unit, environmental conditions, and so on. You can check the duration of usage time using LAMP RUNTIME in the OPTION menu.

On screen

LAMP indicator

Indication

REPLACE LAMP

Over 4 800 hours

REPLACE LAMP” is displayed on the

 

upper left of the screen for 30 seconds.

 

 

 

 

 

 

 

REPLACE LAMP” is displayed on the

Illuminates RED.

Over 5 000 hours

upper left of the screen, and it will stay until

you respond.

 

 

 

 

To clear the screen, press any button.

 

NOTE:

The guide times, 4 800 and 5 000 hours, are rough estimates based on certain conditions and is not a guaranteed time.

For more information about the Lamp unit, such as guaranteed time, see the instructions which is provided with the Lamp unit.

Maintenance

ENGLISH - 41

Image 41
Contents PT-F200U Model number PT-F200NTU / PT-F200U Important Safety NoticeDeclaration of Conformity Important Safety NoticeModel Number PT-F200NTU / PT-F200U Trade Name PanasonicContents Appendix SettingsMaintenance Precautions with regard to safety Do not set up the projector outdoors Precautions with regard to safetyDo not look into the lens while the projector is being used Use only the specified batteriesDo not put your weight on this projector Remove the used batteries from the remote control promptlyDo not mix old and new batteries Electric shocks can result if this is not doneSecurity AccessoriesRead this first Minimum required setting screenAbout Your Projector Remote controlAbout Your Projector Projector bodyTop and front view Control panelOutput by menu operation About Your Projector Back and bottom viewComputer. Selectable for input Calculation methods for screen dimensions Setting upScreen size and throw distance Projected image ScreenSetting up Front leg adjusters and throwing angleProjection method Mounting in the ceiling and projecting from frontLens shift and positioning Adjusting the Lens shift leverHorizontal shift Vertical shiftWhen the projector position is fixed Setting up Projector location rangeWhen the screen position is fixed Connections Connecting example ComputersBefore connection to the projector LAN terminalConnecting with Video IN/S-VIDEO Connecting example AV equipmentsConnecting with Component ConnectionsPower indicator Switching the projector on/offPower cord Switching off the projector Switching on the projectorSwitching the projector on/off Switch the Main Power on Press the Power buttonProjecting an image Selecting the input signalPositioning the image Focus lever Zoom leverSetting up the image position automatically Remote control operationOperating range Facing to the projectorUsing the laser pointer Switching the input signalProjecting an image in INDEX-WINDOW mode Resetting to the factory default settingsCapturing an image Stopping the projection temporaryEnlarging the centered area Controlling the volume of the speakerEnlarging the image Shifting the center pointMenu Navigation Adjusting with the bar scale itemsNavigating through the Menu Displaying the Main menuMenu Navigation Main menu and Sub-menuAudio Balance Live Mode CUT Status InitializeNetwork Standby WEB ControlPicture menu For RGB signals Detailed SetupFor S-VIDEO/VIDEO signals Position menu Resizing When the Resizing is set to OFFFrame Lock Position menuOption menu Direct Power on Power OFF TimerAuto Setup Signal SearchTest Pattern SettingClosed Caption Password Change Input PasswordSecurity menu Text DisplayNetwork menu, the following items are available Network menuItems in Network menu Managing the indicated problems LAMP, Temp and ARF IndicatorsLamp indicator Temp indicatorReplacing the ARF Auto Rolling Filter Care and ReplacementCleaning the projector When to replace the Lamp unit Care and Replacement Resetting the FilterReplacing the Lamp unit Before replacing the Lamp unitCare and Replacement Replacement procedure Ceiling mount bracket safeguardsInstalling the safety cable Removing and replacing the lamp unitTroubleshooting Technical Information List of compatible signalsQuality*2 Dots*1 KHz MHzSerial terminal Control commands Technical Information Cable specificationsComputer connection guidance ProjectorRemote terminal Lamp switchingSwitching input Signals Specifications OUT COMPUTER1Audio Computer AudioScreen height SH Screen width SW Minimum distance Screen size and throw distance for 169 aspect ratioProjection size 16 Throw distance L Trademark acknowledgements DimensionsUnit mm These Operating Instructions are printed on recycled paperALS Ambient Luminance Sensor IndexARF Auto Rolling Filter Calculation methodsNavigation buttons IndexScreen size Technical InformationNuméro de série Avis important concernant la sécuritéNuméro de modèle PT-F200NTU / PT-F200U Déclaration de conformité Avis important concernant la sécuritéAvertissement Avertissements Précautions de sécuritéPrécautions de sécurité Mises EN GardeSinon cela peut causer des chocs électriques Utiliser uniquement les piles spécifiéesNe pas mélanger des piles usées et des piles neuves Précautions lors de lutilisation Précautions lors de linstallationPrécautions lors du transport Délai de remplacement de lUnité de la lampe Remplacement de lunité de la lampe«LAMPE DE REMPLACEMENT» est Avant de remplacer le lUnité de la lampeProtections du support de montage au plafond Installation du câble de sécuritéRetirer et remplacer la lampe De lUnité de La lampeTechnical Support Panasonic Projector Systems Company