Panasonic PT-LB51NTU Specifications, English, Technical Information, Appendix

Appendix

Technical Information

Specifications

Power supply		AC 100 - 240 V 50 Hz/60 Hz
Power consumption		240 W
		During standby (when fan is stopped): 4 W
Amps		2.8 A - 1.3 A
	Panel size (diagonal)	0.6 type (15.24 mm)
	Aspect ratio	4 : 3
LCD panel	Display method	3 transparent LCD panels (RGB)
	Drive method	Active matrix method
	Pixels	PT-LB51NTU/PT-LB51U: 786 432 (1 024 x 768) x 3 panels
		PT-LB51SU: 480 000 (800 x 600) x 3 panels
Lens		Manual zoom (1 - 1.2 x)/Manual focus
		F 1.6 - 1.9, f 18.8 mm - 22.6 mm
Lamp		UHM lamp (165 W)
Optical output		2 000 lm*1
Light output uniformity*2		90 %
Contrast raito		400 : 1
			0 °C - 40 °C (32 °F - 104 °F)
		Temperature	When the HIGHLAND (page 36)
Operating environment			is set to ON: 0 °C - 35 °C (32 °F -
			95 °F)
		Humidity	20% - 80% (no condensation)
	Horizontal scanning	15 kHz - 91 kHz
Scanning	frequency
frequency*3	Vertical scanning	50 Hz - 85 Hz
(for RGB signal)	frequency
	Dot clock frequency	Less than 100 MHz
COMPONENT (YPBPR) signals		480i, 480p, 576i, 576p, 720/60p, 1 080/50i, 1 080/60i,
Color system		7 (NTSC/NTSC 4.43/PAL/PAL-M/PAL-N/PAL60/SECAM)
Projection size		33" - 300" (838.2 mm - 7 620 mm)
Throw distance		PT-LB51NTU/PT-LB51U: 1.1 m - 11.1 m (3'7" - 36'5")
		PT-LB51SU: 1.1 m - 10.9 m (3'7" - 35'9")
Optical axis shift		6:1 (fixed)
Screen aspect ratio		4 : 3
Installation		FRONT/DESK, FRONT/CEILING, REAR/DESK, REAR/CEILING
		(Menu selection method)
Speaker		1 piece	4 cm X 2cm oval
Max. useable volume output		1.0 W (mono)

*1. ISO 21118 conformity:

The values given are averages based on mass-production articles, and the lower limit values at the time of shipment are 80 % of the indicated values.

*2. ISO 21118 conformity:

The values given are averages based on mass-production articles, and the lower limit values at the time of shipment are 80 % of the indicated values.

*3. See “List of compatible signals” on page 44 for available signals.

ENGLISH - 48