Panasonic PT-F200U manual Projecting an image, Selecting the input signal, Positioning the image

Page 22

Projecting an image

Basic Operation

Selecting the input signal

1. Switch on the connected devices.

Press the play button of the required device.

2.Press the INPUT SELECT buttons to select the required input method if needed. See “Switching the input signal” on page 24.

The image will be projected on the screen.

Positioning the image

1.Open the Front panel cover.

2.Adjust the projected image with the Lens shift lever. See “Lens shift and positioning” on page 16.

3. Adjust the angle of the projector.

Screw down the Front leg adjusters and adjust the angle vertically.

See “Front leg adjusters and throwing angle” on page 15.

NOTE:

•SIGNAL SEARCH is ON as default and the signal from the connected devices is detected automatically. See “SIGNAL SEARCH” on page 35.

4.Adjust the focus and the projected image size.

Turn the Focus lever and Zoom lever to adjust the image.

You can confirm the adjusted effect with the TEST PATTERN in OPTION menu. See “TEST PATTERN” on page 36.

Focus lever

Zoom lever

NOTE:

•Do not touch the Air Exhaust port as this may cause burns or injury.

•If keystone distortion occurs, see “KEYSTONE” on page 32.

•If you adjust the focus, you may need to adjust the size of the image by moving the Zoom lever again.

ENGLISH - 22

Image 22

Contents PT-F200U Important Safety Notice Model number PT-F200NTU / PT-F200UModel Number PT-F200NTU / PT-F200U Trade Name Important Safety NoticeDeclaration of Conformity PanasonicContents Maintenance SettingsAppendix Precautions with regard to safety Do not look into the lens while the projector is being used Precautions with regard to safetyDo not set up the projector outdoors Use only the specified batteriesDo not mix old and new batteries Remove the used batteries from the remote control promptlyDo not put your weight on this projector Electric shocks can result if this is not doneAccessories SecurityMinimum required setting screen Read this firstRemote control About Your ProjectorTop and front view Projector bodyAbout Your Projector Control panelComputer. Selectable for input About Your Projector Back and bottom viewOutput by menu operation Screen size and throw distance Setting upCalculation methods for screen dimensions Projected image ScreenProjection method Front leg adjusters and throwing angleSetting up Mounting in the ceiling and projecting from frontHorizontal shift Adjusting the Lens shift leverLens shift and positioning Vertical shiftWhen the screen position is fixed Setting up Projector location rangeWhen the projector position is fixed Before connection to the projector Connecting example ComputersConnections LAN terminalConnecting with Component Connecting example AV equipmentsConnecting with Video IN/S-VIDEO ConnectionsPower cord Switching the projector on/offPower indicator Switching the projector on/off Switching on the projectorSwitching off the projector Switch the Main Power on Press the Power buttonPositioning the image Selecting the input signalProjecting an image Focus lever Zoom leverOperating range Remote control operationSetting up the image position automatically Facing to the projectorSwitching the input signal Using the laser pointerCapturing an image Resetting to the factory default settingsProjecting an image in INDEX-WINDOW mode Stopping the projection temporaryEnlarging the image Controlling the volume of the speakerEnlarging the centered area Shifting the center pointNavigating through the Menu Adjusting with the bar scale itemsMenu Navigation Displaying the Main menuMain menu and Sub-menu Menu NavigationNetwork Standby Live Mode CUT Status InitializeAudio Balance WEB ControlPicture menu For S-VIDEO/VIDEO signals Detailed SetupFor RGB signals Position menu Frame Lock When the Resizing is set to OFFResizing Position menuOption menu Auto Setup Power OFF TimerDirect Power on Signal SearchClosed Caption SettingTest Pattern Security menu Input PasswordPassword Change Text DisplayItems in Network menu Network menuNetwork menu, the following items are available Lamp indicator LAMP, Temp and ARF IndicatorsManaging the indicated problems Temp indicatorCleaning the projector Care and ReplacementReplacing the ARF Auto Rolling Filter Replacing the Lamp unit Care and Replacement Resetting the FilterWhen to replace the Lamp unit Before replacing the Lamp unitInstalling the safety cable Ceiling mount bracket safeguardsCare and Replacement Replacement procedure Removing and replacing the lamp unitTroubleshooting Quality*2 List of compatible signalsTechnical Information Dots*1 KHz MHzSerial terminal Computer connection guidance Technical Information Cable specificationsControl commands ProjectorSwitching input Signals Lamp switchingRemote terminal Specifications Audio COMPUTER1OUT Computer AudioProjection size 16 Throw distance L Screen size and throw distance for 169 aspect ratioScreen height SH Screen width SW Minimum distance Unit mm DimensionsTrademark acknowledgements These Operating Instructions are printed on recycled paperARF Auto Rolling Filter IndexALS Ambient Luminance Sensor Calculation methodsScreen size IndexNavigation buttons Technical InformationNuméro de modèle PT-F200NTU / PT-F200U Avis important concernant la sécuritéNuméro de série Avertissement Avis important concernant la sécuritéDéclaration de conformité Précautions de sécurité AvertissementsMises EN Garde Précautions de sécuritéNe pas mélanger des piles usées et des piles neuves Utiliser uniquement les piles spécifiéesSinon cela peut causer des chocs électriques Précautions lors du transport Précautions lors de linstallationPrécautions lors de lutilisation «LAMPE DE REMPLACEMENT» est Remplacement de lunité de la lampeDélai de remplacement de lUnité de la lampe Avant de remplacer le lUnité de la lampeRetirer et remplacer la lampe Installation du câble de sécuritéProtections du support de montage au plafond De lUnité de La lampePanasonic Projector Systems Company Technical Support