Panasonic PT-F200U manual Detailed Setup, For S-VIDEO/VIDEO signals, For RGB signals

		PICTURE menu
	STILL MODE
DETAILED SETUP
	You can reduce the vertical flicker when projecting
You can perform more detailed image adjustment	a still image.
	OFF:	Deactive
manually.
	ON:	Active
For S-VIDEO/VIDEO signals

TV-SYSTEM

When the video signal is changed, the setting switches automatically. You can switch the setting manually to match the video data. Press I H to cycle through the options.

AUTO

NOTE:

• Set to OFF when projecting a moving image.

NOISE REDUCTION

You can switch the automatic noise reduction system on/off. Press I H to select the required setting.

OFF: No noise reduction

ON: Automatic noise reduction

NTSC	SECAM
NTSC 4.43		PAL-N
PAL	PAL-M

NOTE:

•AUTO setting will select from NTSC/NTSC 4.43/PAL/ PAL60/PAL-M/PAL-N/SECAM.

NOTE:

• Applying noise reduction may affect image quality.

For RGB signals

WHITE BALANCE

You can adjust the white balance more properly in 3 colors temperature by pressing I H.

WHITE BALANCE RED

WHITE BALANCE GREEN

WHITE BALANCE BLUE

Settings

ENGLISH - 31