|
|
|
|
|
|
| LANGUAGE menu | ||
|
|
|
|
|
|
|
|
| |
4:3 |
|
|
|
|
|
|
| ||
|
|
| S1 video signals |
| |||||
The input signal will be projected without any |
| ||||||||
change. | • | S1 video signals are a type of video signal with an |
| ||||||
|
|
|
|
|
| aspect ratio of 16:9 which include a detector signal. |
| ||
|
|
|
|
|
| ||||
|
|
|
|
|
| This detector signal is output by some sources such as |
| ||
|
|
|
|
|
|
| |||
|
|
|
|
| • | When “ASPECT” is set to “AUTO”, the projector |
| ||
|
|
|
|
|
| recognizes the detector signal and automatically |
| ||
|
|
|
|
|
| switches the aspect ratio to 16:9. |
| ||
16:9 |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| |||
|
|
| RESIZING |
|
| ||||
The squeezed signal will be projected in 16:9 ratio. |
|
| |||||||
|
|
|
|
|
|
| |||
|
|
|
|
|
| ||||
|
|
|
|
| |||||
|
|
|
|
| only) |
|
|
| |
|
|
|
|
| When the input signal resolution is lower than the | ||||
|
|
|
|
| projector resolution, it will be projected at the projector | ||||
|
|
|
|
| resolution. You can deactivate the RESIZING and | ||||
S4:3 | |||||||||
project the lower resolution input signal at its original | |||||||||
The input signal will be sized down 75 % and | resolution. Press I H to select the required setting. | ||||||||
projected. S4:3 mode is effective when projecting |
| ON | Active | ||||||
4:3 image on to a 16:9 screen. |
| OFF | Deactive | ||||||
AUTO
The S1 signal which contains an identifying signal will be detected and automatically project the image in proper ratio.
NOTE:
•If you project an image with an unmatched aspect ratio, the image may distort or some portions may be cropped. Select an aspect ratio which preserves the intention of the image creator.
•The order of ASPECT types is defined not only by the input method but also by the input signals. “List of compatible signals” on page 44
•If you project a copyrighted image enlarged or distorted by using ASPECT function in commercial use in a public place, such as a restaurant or hotel, you might infringe on the copyright of the creator which is protected by copyright law.
LANGUAGE menu
1.Press the MENU button to display the menu screen.
Indicates the language which is currently set
2.Select the “LANGUAGE” menu from the main menu, and then press the ENTER button.
3.Press the F or G button to select a language, and then press the ENTER button.
NOTE:
•Usually the recommended setting is ON.
•When the RESIZING is set to ON, the lower resolution input signal may be projected in less quality.
When the RESIZING is set to OFF;
•The size of the image will be projected smaller and you may need to adjust ZOOM and FOCUS, or the projector position backward and forward.
•DIGITAL ZOOM, REALTIME KEYSTONE, KEYSTONE and
FRAME LOCK
(COMPUTER signals only)
If the projected image is degraded, you can activate FRAME LOCK for synchronization. Press I H to select the required option.
OFF | Deactive |
ON | Active |
Settings