Technical Information
Cable specifications
(When connected to a personal computer)
Projector
PC (DTE)
Control commands
Command | Control contents |
| Remarks | |
|
| In standby mode, all commands other than the PON command are | ||
PON | Power ON | ignored. |
| |
|
| The PON command is ignored during lamp ON control. | ||
|
| If a PON command is received while the cooling fan is operating after the | ||
POF | Power OFF | lamp has switched off, the lamp is not turned back on again straight away | ||
|
| in order to protect the lamp. |
| |
AVL | Volume | Parameter |
| |
000 - 063 (Adjustment value 0 - 63) | ||||
|
| |||
|
| Parameter: |
| |
IIS | INPUT | VID = VIDEO | SVD = | |
RG1 = COMPUTER1 | RG2 = COMPUTER2 | |||
|
| |||
|
| NWP = WIRELESS | ||
| Lamp condition | Call back |
| |
Q$S | 0 = Standby | 2 = Lamp ON | ||
query | ||||
| 1 = Lamp ON control active | 3 = Lamp OFF control active | ||
|
| |||
|
| Turning off the projection temporarily. | ||
|
| Send the command to switch between ON and OFF. | ||
OSH | SHUTTER | Do not send the command consecutively. | ||
If a command other than “OSH” is sent to the projector when the shutter | ||||
|
| |||
|
| function is used, the “ER401” command will be sent from the projector to | ||
|
| the computer and the shutter function will be turned off. | ||
Appendix